WTB: Doors and 67 Front Fenders - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NPilot1975 · 09-21-2005, 04:19 PM

I am looking for a driver's side door and a two 67 front fenders (rust free and straight as possible, of course). I am located in Pensacola, FL and need something within driving distance. Thanx

djracer · 09-21-2005, 05:32 PM

You up for another road trip? I have a nice left fender a repairable right fender and new aftermarket doors!

Kevin

NPilot1975 · 09-24-2005, 09:52 AM

I should have bought those fenders when I was there before. The driver's door I got from you has a bad spot under the upper hinge, I didn't notice. Looks like someone backed the door into something with it open and bent the door structure. Not sure I want aftermarket doors, do you still have the white latex doors? Might be able to make one good from the one I have and that one. I will get in touch when I can make it up. Should be able to come without the trailer this time.

djracer · 09-24-2005, 04:34 PM

I do still have the white doors! Let m eknow if you decide to make a road trip!

55chevy · 09-25-2005, 10:51 AM

There's a guy in the boonies here outside Enterprise that has a bunch of trucks and parts, I was out there looking for a roof and he had one that he would take $50 for, he's a real hillbilly and hard to understand LOL. I didn't ask about dooors but he had some complete trucks for sale, one fairly nice 68 longbed stepside for $650.

NPilot1975 · 09-26-2005, 12:25 AM

55chevy-

Do you have a number or address? Any shortbed fleetside trucks?

55chevy · 09-26-2005, 12:13 PM

James Bryant is the guy, not sure if they have a phone, I don't remember the address, it was on County Road 625, just north of CR 636 on the left side, yard full of trucks. There is a James Bryant in phone book at 7846 CR 625, 334-308-1250, that may be it. Don't remember a short fleet, but the whole area was grown up with weeds and I was mainly looking at cab roofs.

09-21-2005, 04:19 PM	#1
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	WTB: Doors and 67 Front Fenders I am looking for a driver's side door and a two 67 front fenders (rust free and straight as possible, of course). I am located in Pensacola, FL and need something within driving distance. Thanx __________________ 1972 Blazer body...need to get a thread started for the rest of the story

09-21-2005, 05:32 PM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	You up for another road trip? I have a nice left fender a repairable right fender and new aftermarket doors! Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-24-2005, 09:52 AM	#3
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	I should have bought those fenders when I was there before. The driver's door I got from you has a bad spot under the upper hinge, I didn't notice. Looks like someone backed the door into something with it open and bent the door structure. Not sure I want aftermarket doors, do you still have the white latex doors? Might be able to make one good from the one I have and that one. I will get in touch when I can make it up. Should be able to come without the trailer this time. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

09-24-2005, 04:34 PM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	I do still have the white doors! Let m eknow if you decide to make a road trip! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

09-26-2005, 12:25 AM	#6
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	55chevy- Do you have a number or address? Any shortbed fleetside trucks? __________________ 1972 Blazer body...need to get a thread started for the rest of the story

09-25-2005, 10:51 AM	#5
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 850	There's a guy in the boonies here outside Enterprise that has a bunch of trucks and parts, I was out there looking for a roof and he had one that he would take $50 for, he's a real hillbilly and hard to understand LOL. I didn't ask about dooors but he had some complete trucks for sale, one fairly nice 68 longbed stepside for $650.

09-26-2005, 12:13 PM	#7
55chevy Car Truck Bike Nut Join Date: Aug 2005 Location: Suffolk Virginia Posts: 850	James Bryant is the guy, not sure if they have a phone, I don't remember the address, it was on County Road 625, just north of CR 636 on the left side, yard full of trucks. There is a James Bryant in phone book at 7846 CR 625, 334-308-1250, that may be it. Don't remember a short fleet, but the whole area was grown up with weeds and I was mainly looking at cab roofs. __________________ Snow free Florida panhandle, don't miss Indiana winters Temp in Suffolk Virginia, Sentenced 2 to 5 years LOL 68 shortfleet project 94 3500 TD dually so many cars so little time 72 K2 CST 2WD Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.