68 chevy truck 3/4 2wd rear brake parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68chevylwb · 09-26-2005, 05:38 PM

have i 68 chevy 3/4 2wd truck with rear leaf springs.
i'm looking for all the brake parts in side the rear drum no-brake shoes needed
just the hardware. bought all new drums front and rear and brake shoes
and new hardware for front brakes but was told rear brake hardware was not to be had anywhere..any thing to help me with this new or used...
.................................................................................................... .
thanks

LUV2XCLR8 · 09-26-2005, 06:15 PM

Well I realize you are probably looking for used, I worked 2.5 years at a
muffler and brake shop and would strongly reccomend new springs and
hardware, can be picked up at just about any local parts store.

As
for the adjusters, bars, and inner bracket type pieces, go with used.

68chevylwb · 09-26-2005, 06:55 PM

thanks for info... i can get new springs but not the hardware. there a adjuster bar that rides on the adjuster if that was any sense that i cant find
can get complete front kit 11" DRUMS BUT REARS ARE 12" DRUMS WEARD DEAL. THANKS

RicksTrucks · 09-27-2005, 02:14 AM

I have a 71 GMC 3/4 frame that I am taking the front disc off of, I could get the back brake stuff for you. Let me take pics.

09-26-2005, 05:38 PM	#1
68chevylwb Junior Member Join Date: Sep 2004 Location: Bakersfield, CA Posts: 132	68 chevy truck 3/4 2wd rear brake parts have i 68 chevy 3/4 2wd truck with rear leaf springs. i'm looking for all the brake parts in side the rear drum no-brake shoes needed just the hardware. bought all new drums front and rear and brake shoes and new hardware for front brakes but was told rear brake hardware was not to be had anywhere..any thing to help me with this new or used... .................................................................................................... . thanks

09-26-2005, 06:15 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Well I realize you are probably looking for used, I worked 2.5 years at a muffler and brake shop and would strongly reccomend new springs and hardware, can be picked up at just about any local parts store. As for the adjusters, bars, and inner bracket type pieces, go with used. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T Last edited by LUV2XCLR8; 09-26-2005 at 06:17 PM.

09-27-2005, 02:14 AM	#4
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	I have a 71 GMC 3/4 frame that I am taking the front disc off of, I could get the back brake stuff for you. Let me take pics. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

09-26-2005, 06:55 PM	#3
68chevylwb Junior Member Join Date: Sep 2004 Location: Bakersfield, CA Posts: 132	thanks for info... i can get new springs but not the hardware. there a adjuster bar that rides on the adjuster if that was any sense that i cant find can get complete front kit 11" DRUMS BUT REARS ARE 12" DRUMS WEARD DEAL. THANKS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.