67- 68 bucket seats - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**SOON2BLAZE** · 09-24-2005, 03:20 PM

I hate to sell these!!!! They bolt into any 67 -72 truck, but not Blazers. I've been hanging on to them for years. I took out my blazer buckets to put these in and the bolt patern is diffrent. Don't want to drill in to the blazer. so, I'd like to get 400. plus shipping which might no be too bad because the seat pads unbolt. multiple smaller boxes? the frame may be another story. Has slits in the drivers side only, some fading and discoloration, foam is in great shape, they ride good! No rust on frame and the slider works fine. You would be hard pressed to find unrestored ones in this good of shape. still has jacking sticker in the storage box under the middle seat. I'm in so. Utah along I-15, pick up is always welcomed.

Custom_C5 · 09-24-2005, 03:34 PM

That's a very nice set of seats! if I didn't already had 2 sets I would interested, saw a set with nice covers a couple of years ago for $1350 yours should sell fast at $400

86swb · 09-24-2005, 03:50 PM

No problem selling those seats. You do not find them everday.

**SOON2BLAZE** · 09-24-2005, 03:56 PM

ya, I love those seats! I've been tripping over them and shuffeling them around the garage for years waiting to use them. hate to part with them but.... I got them out of a 1968 GMC 1 ton motorhome. I had never seen a factory gray interior before.

stllookn · 09-24-2005, 05:23 PM

The color is Saddle Fawn and was in lots of trucks i have seen. My white '68 C30 motorhome/flatbed had the exact seats. How close are you to Boise? My brother lives there and I could have him hold them for me until I come to visit. He could pay for them...I don't owe him any money for truck parts...YET...LOL!

LUV2XCLR8 · 09-24-2005, 05:31 PM

Quote:

Originally Posted by 86swb

No problem selling those seats. You do not find them everday.

I agree totally, they won't last very long, JMHO

**SOON2BLAZE** · 09-24-2005, 05:33 PM

the drivers seat has splits where the material has seperated but no big tears. I'm at the very bottom of UT, 8 hours ? from ID border (5 hours to SLC) Thanks for the tip on the color. I have seen it on 2 other GMC's only. Same with the Gray bezel and glove box door

6T8 · 09-24-2005, 08:03 PM

Sent you a pm

Jakes-66-K10 · 09-24-2005, 10:38 PM

If 6T8 falls through private message me, I'm in Utah too.

**SOON2BLAZE** · 09-26-2005, 02:07 PM

Anyone else interested?

Jakes-66-K10 · 09-26-2005, 03:56 PM

Sorry I didn't reply sooner, I found some cheaper and closer to me.

blazerparts · 09-26-2005, 05:33 PM

I might be interested............take $350 for them? Might take me a couple months to get over there to pick them up, that ok?

**SOON2BLAZE** · 09-27-2005, 09:00 AM

thanks, but I need to get it out of the garage ASAP. When Ithought I could use it I didn't mind it being in the way so much.

blazerparts · 09-27-2005, 10:18 AM

Ok, well let me know if you change your mind..........couple months would be the longest, probably be quicker.

09-24-2005, 03:20 PM	#1
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	67- 68 bucket seats I hate to sell these!!!! They bolt into any 67 -72 truck, but not Blazers. I've been hanging on to them for years. I took out my blazer buckets to put these in and the bolt patern is diffrent. Don't want to drill in to the blazer. so, I'd like to get 400. plus shipping which might no be too bad because the seat pads unbolt. multiple smaller boxes? the frame may be another story. Has slits in the drivers side only, some fading and discoloration, foam is in great shape, they ride good! No rust on frame and the slider works fine. You would be hard pressed to find unrestored ones in this good of shape. still has jacking sticker in the storage box under the middle seat. I'm in so. Utah along I-15, pick up is always welcomed. Attached Images Last edited by SOON2BLAZE; 09-24-2005 at 03:21 PM.

09-24-2005, 03:50 PM	#3
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	No problem selling those seats. You do not find them everday. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

09-24-2005, 05:23 PM	#5
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	The color is Saddle Fawn and was in lots of trucks i have seen. My white '68 C30 motorhome/flatbed had the exact seats. How close are you to Boise? My brother lives there and I could have him hold them for me until I come to visit. He could pay for them...I don't owe him any money for truck parts...YET...LOL! __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) Last edited by stllookn; 09-24-2005 at 05:28 PM.

09-26-2005, 02:07 PM	#10
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	I still got em Anyone else interested?

09-26-2005, 05:33 PM	#12
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	I might be interested............take $350 for them? Might take me a couple months to get over there to pick them up, that ok? __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater

09-24-2005, 03:34 PM	#2
Custom_C5 Registered User Join Date: Jun 2004 Location: ASS-hhh-ville Posts: 94	That's a very nice set of seats! if I didn't already had 2 sets I would interested, saw a set with nice covers a couple of years ago for $1350 yours should sell fast at $400

09-24-2005, 03:56 PM	#4
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	ya, I love those seats! I've been tripping over them and shuffeling them around the garage for years waiting to use them. hate to part with them but.... I got them out of a 1968 GMC 1 ton motorhome. I had never seen a factory gray interior before.

09-24-2005, 05:33 PM	#7
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	the drivers seat has splits where the material has seperated but no big tears. I'm at the very bottom of UT, 8 hours ? from ID border (5 hours to SLC) Thanks for the tip on the color. I have seen it on 2 other GMC's only. Same with the Gray bezel and glove box door

09-24-2005, 08:03 PM	#8
6T8 Active Member Join Date: Dec 2004 Location: Tucson, AZ Posts: 233	Sent you a pm

09-24-2005, 10:38 PM	#9
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	If 6T8 falls through private message me, I'm in Utah too.

09-26-2005, 03:56 PM	#11
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	Sorry I didn't reply sooner, I found some cheaper and closer to me.

09-27-2005, 09:00 AM	#13
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	thanks, but I need to get it out of the garage ASAP. When Ithought I could use it I didn't mind it being in the way so much.

09-27-2005, 10:18 AM	#14
blazerparts No,I DON'T have Tourett's Join Date: Mar 2005 Location: Reno, NV Posts: 556	Ok, well let me know if you change your mind..........couple months would be the longest, probably be quicker. __________________ '72 K5 CST 350/350 Daily Driver '69 GMC3500 Camper Special CST Flatbed 396/400 Upgraded to show truck '69 GMC 2500 L6292, 3spd beater



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.