What headers fit and work best? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MrC1 · 09-28-2005, 09:50 PM

I've got a '72 C20 with a 402 BB. It's currently right off the farm in original condition. I'd like to upgrade the exhaust, but I've heard sometimes "car" type headers fit better since they hug the body more, leaving more ground clearance. Is this true, or would I be better off going with truck headers?

COBRO · 09-29-2005, 12:21 AM

On my 72 c-20 bb I used Hedman Elites - they have a 3/8"thick flange were they bolt to the head so they dont warp, most use 1/4" - thicker wall tubing and come coated - ball flange on the collectors so theres no gaskets to burn thru or flanges to warp - they are more spendy than most but well worth the money in my book. Unless you plan on slamming the truck they give plenty of clearance underneath. JMHO:::::::::::CB

COBRO · 09-29-2005, 12:27 AM

Oh and they are the truck hedders - Ive heard of people using hedders made for chevelles but dont know any of the details.::CB

*FormerMember* · 09-29-2005, 08:44 AM

The hedmean Elites, are they HED-69827?

http://store.summitracing.com/defaul...4&autoview=sku

How about a pic of your truck?

I have a 402 C10 that's dropped 4" in the front...

COBRO · 09-29-2005, 11:32 AM

Yep that be them - you can get the off road model #69820 for less $ as it doesnt come with the hot air stove for the air cleaner or the exhaust crossover plate adapter. They also have the regular collectors that takes gaskets instead of the ball mount types. Sorry I cant post any pics at this time but took some measurements on mine and the bottom of the collector hangs 4 1/2" below the bottom of the frame and is 10 1/2" off the ground. Thats with the stock front susp. for a C20 and 31" tires. HTH::::CB

*FormerMember* · 09-29-2005, 11:39 AM

Quote:

Originally Posted by COBRO

Yep that be them - you can get the off road model #69820 for less $ as it doesnt come with the hot air stove for the air cleaner or the exhaust crossover plate adapter. They also have the regular collectors that takes gaskets instead of the ball mount types. Sorry I cant post any pics at this time but took some measurements on mine and the bottom of the collector hangs 4 1/2" below the bottom of the frame and is 10 1/2" off the ground. Thats with the stock front susp. for a C20 and 31" tires. HTH::::CB

I think I'd stay with the ball flange at the collector.

Bill72BB · 09-29-2005, 12:14 PM

I've been running the one's in my sig. and love them/

LUV2XCLR8 · 09-29-2005, 05:44 PM

Quote:

Originally Posted by COBRO

On my 72 c-20 bb I used Hedman Elites - they have a 3/8"thick flange were they bolt to the head so they dont warp, most use 1/4" - thicker wall tubing and come coated - ball flange on the collectors so theres no gaskets to burn thru or flanges to warp - they are more spendy than most but well worth the money in my book. Unless you plan on slamming the truck they give plenty of clearance underneath. JMHO:::::::::::CB

No BB here, just a lil SBC, but I also have "Elites" and they

Pic's in my siggy

MrC1 · 10-02-2005, 01:27 PM

I keep seeing references to "oval port" and "rectangle port" heads. HTH do I know what I have (w/o pulling the manifolds, of course)? Did our trucks have a standard?

COBRO · 10-02-2005, 02:14 PM

You have oval port heads - the rect.port heads were never used on truck engines. Pull a valve cover and get the number off the head and you can find out which oval port head you have - there were many different versions used from the factory. HTH:::CB

09-28-2005, 09:50 PM	#1
MrC1 Dork For Days Join Date: Aug 2005 Location: Dallas Posts: 407	What headers fit and work best? I've got a '72 C20 with a 402 BB. It's currently right off the farm in original condition. I'd like to upgrade the exhaust, but I've heard sometimes "car" type headers fit better since they hug the body more, leaving more ground clearance. Is this true, or would I be better off going with truck headers?

09-29-2005, 08:44 AM	#4
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	The hedmean Elites, are they HED-69827? http://store.summitracing.com/defaul...4&autoview=sku How about a pic of your truck? I have a 402 C10 that's dropped 4" in the front... Last edited by FormerMember; 09-29-2005 at 08:47 AM.

09-29-2005, 12:14 PM	#7
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,980	I've been running the one's in my sig. and love them/ __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

10-02-2005, 01:27 PM	#9
MrC1 Dork For Days Join Date: Aug 2005 Location: Dallas Posts: 407	2nd part to this question! I keep seeing references to "oval port" and "rectangle port" heads. HTH do I know what I have (w/o pulling the manifolds, of course)? Did our trucks have a standard?

09-29-2005, 12:21 AM	#2
COBRO Active Member Join Date: Jan 2005 Location: RDM,Oregon Posts: 285	On my 72 c-20 bb I used Hedman Elites - they have a 3/8"thick flange were they bolt to the head so they dont warp, most use 1/4" - thicker wall tubing and come coated - ball flange on the collectors so theres no gaskets to burn thru or flanges to warp - they are more spendy than most but well worth the money in my book. Unless you plan on slamming the truck they give plenty of clearance underneath. JMHO:::::::::::CB

09-29-2005, 12:27 AM	#3
COBRO Active Member Join Date: Jan 2005 Location: RDM,Oregon Posts: 285	Oh and they are the truck hedders - Ive heard of people using hedders made for chevelles but dont know any of the details.::CB

09-29-2005, 11:32 AM	#5
COBRO Active Member Join Date: Jan 2005 Location: RDM,Oregon Posts: 285	Yep that be them - you can get the off road model #69820 for less $ as it doesnt come with the hot air stove for the air cleaner or the exhaust crossover plate adapter. They also have the regular collectors that takes gaskets instead of the ball mount types. Sorry I cant post any pics at this time but took some measurements on mine and the bottom of the collector hangs 4 1/2" below the bottom of the frame and is 10 1/2" off the ground. Thats with the stock front susp. for a C20 and 31" tires. HTH::::CB

10-02-2005, 02:14 PM	#10
COBRO Active Member Join Date: Jan 2005 Location: RDM,Oregon Posts: 285	You have oval port heads - the rect.port heads were never used on truck engines. Pull a valve cover and get the number off the head and you can find out which oval port head you have - there were many different versions used from the factory. HTH:::CB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.