vent window rubber - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redhead69 · 10-12-2005, 12:55 AM

Where can I get the tool to smash the special rivets on my new vent window rubber. I've taken the windows to a local glass shop and after scratching my frames up he told me he couldnt do it, and then asked me if I wanted to rent his tool for 25.00 and let me try

The guy kinda ticked me off so I bailed

I think the tool is like a dimple die ?? anyone done this or should I try another shop.. looks like something I could do if I just had the right tool..

any help is appreciated..
eric

70chevyfreak · 10-12-2005, 06:00 AM

LMC and Chevy Duty both sell them.

JimKshortstep4x4 · 10-12-2005, 06:04 AM

I use a regular pop rivet gun. If you put a small tube on the rivet shaft it will let you get the rivet into the channel. It acts as an extender for the gun. I use a top off of a spark plug, (the screw on type), but a small tube will work. The extension has to be about 1/2" long.

Jim

byrd · 10-12-2005, 06:54 AM

I've got the tool, if you want it ,say $12 shipped to your door. Randy

**hilljob26** · 10-12-2005, 07:35 AM

i got mine from manes truck parts for like 3 bucks

redhead69 · 10-12-2005, 10:42 AM

Is this the tool everyones talking about

Byrd is yours different??

Frizzle Fry · 10-12-2005, 12:16 PM

LMC included one with my kit. I'd take the pop rivet advice by JimK next time.

redhead69 · 10-12-2005, 02:03 PM

I've got a pop rivet gun.. I will fiddle and get back with ya'll..

thanks

eric

10-12-2005, 12:55 AM	#1
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	vent window rubber Where can I get the tool to smash the special rivets on my new vent window rubber. I've taken the windows to a local glass shop and after scratching my frames up he told me he couldnt do it, and then asked me if I wanted to rent his tool for 25.00 and let me try The guy kinda ticked me off so I bailed I think the tool is like a dimple die ?? anyone done this or should I try another shop.. looks like something I could do if I just had the right tool.. any help is appreciated.. eric __________________ Currently truckless

10-12-2005, 07:35 AM	#5
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	i got mine from manes truck parts for like 3 bucks __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

10-12-2005, 10:42 AM	#6
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Is this the tool everyones talking about Byrd is yours different?? __________________ Currently truckless

10-12-2005, 02:03 PM	#8
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	I've got a pop rivet gun.. I will fiddle and get back with ya'll.. thanks eric __________________ Currently truckless

10-12-2005, 06:00 AM	#2
70chevyfreak Registered User Join Date: Feb 2005 Location: Holt, Missouri. Near KC Posts: 64	LMC and Chevy Duty both sell them.

10-12-2005, 06:04 AM	#3
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	I use a regular pop rivet gun. If you put a small tube on the rivet shaft it will let you get the rivet into the channel. It acts as an extender for the gun. I use a top off of a spark plug, (the screw on type), but a small tube will work. The extension has to be about 1/2" long. Jim

10-12-2005, 12:16 PM	#7
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	LMC included one with my kit. I'd take the pop rivet advice by JimK next time.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.