WTB: '72 High Hump A/C Cab or... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crawdad · 10-11-2005, 11:36 PM

Looking for a 1972 high hump AC cab near GA, or if you've got one, I could get by with a patch panel for the area above the visors. Patch panel would need to go all the way across from corner to corner. Thanks.

digger · 10-12-2005, 12:59 AM

pm sent

jsbgump · 10-12-2005, 10:23 AM

I have one but its here in Tx.

billsbowtie · 10-12-2005, 11:27 AM

if you are still looking ?how far down the windshield post do you need? and how far back the roof do you need.

crawdad · 10-12-2005, 04:01 PM

Quote:

Originally Posted by billsbowtie

if you are still looking ?how far down the windshield post do you need? and how far back the roof do you need.

I haven't actually disassembled my truck yet. I probably will need 5 to 6 inches back. As far as the windshield post, let me check again a little closer. I'm not really sure how the metal is put together in that area, but I don't think there is much damage at all in the post. I believe if I could get right to the post I would be ok, but I'll check again. Thanks a lot.

CHEVYE · 10-12-2005, 05:43 PM

i have a nice high hump that has no holes in it for $40 if you just want to convert the floor.

crawdad · 10-12-2005, 07:35 PM

Quote:

Originally Posted by CHEVYE

i have a nice high hump that has no holes in it for $40 if you just want to convert the floor.

Thanks CHEVYE, but are you just talking about the hump itself. What I meant was that I need the whole cab. You got one?

CHEVYE · 10-12-2005, 11:29 PM

wish i did buddy, i was just gonna convert mine. i see them around once in awhile, good luck to ya.

**uncle** · 10-13-2005, 04:23 PM

I've got 1 you can have, but it won't have the outer roof skin. It had factory cab lights and I'm gonna cut them out.

crawdad · 10-13-2005, 07:53 PM

Oh no! You're making me cry... "uncle"

. You don't by chance know where another one is at do ya?

**uncle** · 10-13-2005, 08:09 PM

I have the top only, not a whole cab. If you want the whole top, I'll take $50 for it. I have not cut it yet.

crawdad · 10-13-2005, 08:28 PM

Appreciate the offer, but I've managed to find a patch panel for my roof area above the windshield. Now I've got to try and find someone who can weld it in for me.

I've got a friend who works at a body shop, but he stays so busy there that he likes to take it easy on his off time. Can't say as I blame him there. I keep threatening to buy a MIG and try and learn how to do this stuff myself, just a little scared to try it, if you know what I mean.

10-11-2005, 11:36 PM	#1
crawdad Senior Member Join Date: Sep 2004 Location: Georgia Posts: 614	WTB: '72 High Hump A/C Cab or... Looking for a 1972 high hump AC cab near GA, or if you've got one, I could get by with a patch panel for the area above the visors. Patch panel would need to go all the way across from corner to corner. Thanks. __________________ 2012 Silverado LT 1500, 5.3, 6 speed auto '86 SWB C-10 Silverado

10-12-2005, 12:59 AM	#2
digger Registered User Join Date: Dec 1999 Location: kansas city Posts: 767	pm sent __________________ kansas city, ks. selling out 72 chevy swb 4x4, a/c (in resto) 70 chevy 3/4t 4x4,lwb 89 chvy 1/2t 4x4, 99 chevy silverado, ext. cab 3 door present driver

10-12-2005, 10:23 AM	#3
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	I have one but its here in Tx. __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

10-12-2005, 05:43 PM	#6
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	i have a nice high hump that has no holes in it for $40 if you just want to convert the floor. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

10-12-2005, 11:29 PM	#8
CHEVYE my gas saver Join Date: Sep 2003 Location: Clarksville, TN Posts: 2,046	wish i did buddy, i was just gonna convert mine. i see them around once in awhile, good luck to ya. __________________ 85' SWB, 4.3/TH350, getting ready for paint 84`SWB, 462ci./TH400, cowl hood, 15" billet spec., flows, blazer buckets/console, flat black 71`SWB, project ebay feedback

10-12-2005, 11:27 AM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	if you are still looking ?how far down the windshield post do you need? and how far back the roof do you need.

10-13-2005, 04:23 PM	#9
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Panel I've got 1 you can have, but it won't have the outer roof skin. It had factory cab lights and I'm gonna cut them out.

10-13-2005, 07:53 PM	#10
crawdad Senior Member Join Date: Sep 2004 Location: Georgia Posts: 614	Oh no! You're making me cry... "uncle" . You don't by chance know where another one is at do ya? __________________ 2012 Silverado LT 1500, 5.3, 6 speed auto '86 SWB C-10 Silverado

10-13-2005, 08:09 PM	#11
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Top I have the top only, not a whole cab. If you want the whole top, I'll take $50 for it. I have not cut it yet.

10-13-2005, 08:28 PM	#12
crawdad Senior Member Join Date: Sep 2004 Location: Georgia Posts: 614	Appreciate the offer, but I've managed to find a patch panel for my roof area above the windshield. Now I've got to try and find someone who can weld it in for me. I've got a friend who works at a body shop, but he stays so busy there that he likes to take it easy on his off time. Can't say as I blame him there. I keep threatening to buy a MIG and try and learn how to do this stuff myself, just a little scared to try it, if you know what I mean. __________________ 2012 Silverado LT 1500, 5.3, 6 speed auto '86 SWB C-10 Silverado



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.