Steering Column Suggestions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72c20?c10 · 10-12-2005, 04:13 PM

I would like to install a steering column that has tilt, cruise control, high beam,
wipers/washers, head lights, turn signals, hazard lights, airbags.

has anyone done this yet? If so what column could I use?
I bought a Flaming River column already, then decided to try to find another
column from a newer vehicle with all the above functions in the column.

Any Ideas are appreciated.

Longhorn Man · 10-12-2005, 06:04 PM

I was going to say a van column out of a 83 - 95ish ... untill I saw that you want air bags.
Personally, i'd rethink that part of it.

72c20?c10 · 10-14-2005, 12:18 PM

Maybe not air bags. It sounds like a huge electrical cluster $%^# to install.
So... I should look for a van column?

72wascal · 10-14-2005, 12:36 PM

What length shaft did you end up with? I just want a tilt column shift column and was looking for an aluminum billet to match the rest of the interior bling. Got any suggestions? All I need is length and maybe a part number if you have.

With all the options that you want I don't really know unless you ask the aftermarket manufacturers like ididit or flaming river. They may have something in the works.

cdowns · 10-14-2005, 12:54 PM

my 05 silverado got all that stuff plus it's got controls fer the stero and other stuff too that sounds like what youi're lookin for

10-12-2005, 04:13 PM	#1
72c20?c10 Registered User Join Date: Jul 2004 Location: So. Cal. Posts: 9	Steering Column Suggestions I would like to install a steering column that has tilt, cruise control, high beam, wipers/washers, head lights, turn signals, hazard lights, airbags. has anyone done this yet? If so what column could I use? I bought a Flaming River column already, then decided to try to find another column from a newer vehicle with all the above functions in the column. Any Ideas are appreciated. __________________ Eschew Obfuscation

10-14-2005, 12:18 PM	#3
72c20?c10 Registered User Join Date: Jul 2004 Location: So. Cal. Posts: 9	Maybe not air bags. It sounds like a huge electrical cluster $%^# to install. So... I should look for a van column? __________________ Eschew Obfuscation

10-14-2005, 12:36 PM	#4
72wascal Hawaiian Member Join Date: Oct 2005 Location: Maui, Hawaii Posts: 28	What length shaft did you end up with? I just want a tilt column shift column and was looking for an aluminum billet to match the rest of the interior bling. Got any suggestions? All I need is length and maybe a part number if you have. With all the options that you want I don't really know unless you ask the aftermarket manufacturers like ididit or flaming river. They may have something in the works. __________________ 72 C-10 ProStreet - 331 cu w/ T350 trans 9" shortened w/ disc brakes - Mild body modifications 3/5 drop - More in the works

10-14-2005, 12:54 PM	#5
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	my 05 silverado got all that stuff plus it's got controls fer the stero and other stuff too that sounds like what youi're lookin for __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

10-12-2005, 06:04 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I was going to say a van column out of a 83 - 95ish ... untill I saw that you want air bags. Personally, i'd rethink that part of it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.