WTB: Need 4 washers/bolts for front inner fender - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pound41 · 10-14-2005, 12:00 AM

I need the 4 washers/brackets( for lack of a better term) and the bolts That go into the 4 bolt hole/ indented places on a front fender well. It looks like are sort of rounded and 1 is square. I need 2 complete sets. Thanks

junkyardjohn · 10-14-2005, 10:32 AM

Quote:

Originally Posted by pound41

I need the 4 washers/brackets( for lack of a better term) and the bolts That go into the 4 bolt hole/ indented places on a front fender well. It looks like are sort of rounded and 1 is square. I need 2 complete sets. Thanks

NAPA WILL HAVE THEM. ASK FOR BODY BOLTS. I THINK THATS WHAT YOU ARE ASKING FOR?? JOHN

pound41 · 10-15-2005, 06:47 AM

Junkyard John: I am fixing the floor pan/Pillar post on my 70 blazer. so when I removed the fender the only bolts holding the inner wheel well in was the small outside bolts.Rusted away at the front. The 4 big bolts were missing. I looked at my 71Blazer all 4 big bolts that bolt up through the middle area of the well Have an indented or scooped out area around the bolt hole since they are in the curved area of the well. My 71 has plates/washers that fit in the scooped out area and give the bolt a flat surface to tighten against. Those are what I am really looking for
Thanks Billy

**Tim Christian** · 10-15-2005, 07:30 AM

I have a inner/outter fender bolt set with all the j-nuts for $20.00

junkyardjohn · 10-15-2005, 11:27 AM

IT SEEMS TO ME THAT ALL THE INNER FENDER BOLTS ARE THE SAME DIA. WITH THE EXCEPTION OF THE BOLT THAT GOES THRU THE INNER TO THE CAB. SOUNDS LIKE TIM CHRISTIAN CAN FIX YOU RIGHT UP.

JOHN

10-14-2005, 12:00 AM	#1
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	WTB: Need 4 washers/bolts for front inner fender I need the 4 washers/brackets( for lack of a better term) and the bolts That go into the 4 bolt hole/ indented places on a front fender well. It looks like are sort of rounded and 1 is square. I need 2 complete sets. Thanks

10-15-2005, 11:27 AM	#5
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	IT SEEMS TO ME THAT ALL THE INNER FENDER BOLTS ARE THE SAME DIA. WITH THE EXCEPTION OF THE BOLT THAT GOES THRU THE INNER TO THE CAB. SOUNDS LIKE TIM CHRISTIAN CAN FIX YOU RIGHT UP. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

10-15-2005, 06:47 AM	#3
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,268	Junkyard John: I am fixing the floor pan/Pillar post on my 70 blazer. so when I removed the fender the only bolts holding the inner wheel well in was the small outside bolts.Rusted away at the front. The 4 big bolts were missing. I looked at my 71Blazer all 4 big bolts that bolt up through the middle area of the well Have an indented or scooped out area around the bolt hole since they are in the curved area of the well. My 71 has plates/washers that fit in the scooped out area and give the bolt a flat surface to tighten against. Those are what I am really looking for Thanks Billy

10-15-2005, 07:30 AM	#4
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	I have a inner/outter fender bolt set with all the j-nuts for $20.00



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.