Misc leftovers for sale, maybe trade - The 1947 - Present Chevrolet & GMC Truck Message Board Network

incoma · 10-13-2005, 09:55 PM

Ok, I just moved into my new house and I don't have space. I had hoped to have a post of "for sale" stuff after I completed my restoration, but can't. I must get rid of some of this stuff. I'm going to post this stuff with several replies to the thread, so keep reading.

If any Oklahoma guys want to meet at the Chickasha swap this weekend, I'll be there Saturday.

First off is a driver quality cargo light, new LMC fuel neck filler, and new black cover for a rear view mirror.

All one lot - $15 shipped. ============> Sold

I also have a set of small block chevy head shims, to decrease your compression. They are used, but still usable. These are .030 shims.

$10 shipped.

Next is 2 sets of driver quality window vent handles.

$15 shipped. ==========> Sold

If you have questions, need more pics, or want to make an offer, please let me know. I need to get some space back.

incoma · 10-13-2005, 09:57 PM

Next is a set of NEW Dark Green 70-71 door panel covers. My movers accidently rolled a section of the panels so the mylar is peeling just a tad, and has some light wrinkle marks in the clearcoat. They are still in the bag.

$100 shipped. ========> Updated

How about $70 + shipping

incoma · 10-13-2005, 10:00 PM

Dash pads

Dark olive green. I have 2. One is my original which wouldn't be bad for a driver. It's bumpy. The foam has become a bit misformed after 35 years. The green vinyl looks great. Its the one on the right side of the pictures.

$35 + shipping =============>

Still Available - $25 + shipping

The one on the left is brand New, never installed. The green is just a tad bit too light for my truck's paint and didn't look right. It's a solid molded pad, no vinyl.

$40 + shipping =======>

Still Available - $30 + shipping

incoma · 10-13-2005, 10:02 PM

This was a brand new never installed headliner chrome. The movers bent the plastic, and scratched another section. 2 of the sections are perfect and ready to install. A skilled guy with some time may be able to bend the bent section back into form. I don't have the patience.

$60 shipped. ========> Sold

incoma · 10-13-2005, 10:05 PM

I have a FULL set of SWB trim with woodgrain. A few of the sections are bent or have dings. Most of the pieces are in good shape. I'd say that this set is 50% driver 50% not so driver. A few sections such as the door pieces look new or excellent driver. I do have tubes to ship it in.

$100 + shipping. =========> Sold

incoma · 10-13-2005, 10:13 PM

I also have a 400 cast crank ground 10/10 that needs polishing - $100
2 327 steel small journal cranks - one looks like it needs some welding, one needs balancing - $10 each.
steel 350 crank that needs grinding - $100

I don't want to ship the cranks but can. I'd prefer to have you look at this stuff before buying.

ol yellow 72 · 10-13-2005, 10:30 PM

intrested in the new dash pad how much to ship to 40008

RicksTrucks · 10-13-2005, 10:36 PM

I will take the vent window handles.

incoma · 10-14-2005, 05:11 PM

ol yellow 72 - I'm getting a quote of $9.50 on fedex.com for ground freight.

Rickstrucks - they're yours. you can paypal me at jroy74@cox.net or pm me for an address for a money order - unless you're going to be in Chickasha this weekend.

incoma · 10-14-2005, 06:55 PM

I forgot to add that I have 5 15 x 6 6 lug steel rims. $20 for them + shipping.

Updated to $10 + shipping

kndall · 10-14-2005, 10:40 PM

do you have a picture of the rims? I would pick them up since I am local. also interested in the cargo light lot of parts. Don't waste your time driving to Chickasha, I went today and EVERYTHING was WAYY overpriced. If I had known before I left I wouldn't have wasted the gas. just an fyi.

zooza1 · 10-15-2005, 03:13 AM

Count the swb trim as mine. let me pm you with my home info. i am out of the country and have to go with a middle man. if thats acceptable. pm coming up.......

LUV2XCLR8 · 10-15-2005, 07:48 AM

Quote:

Originally Posted by zooza1

i am out of the country and have to go with a middle man.

Any idea when you get to come home? if they are even telling you guys anything

incoma · 10-15-2005, 12:10 PM

Here's some pics of the rims.

I forgot to add that I have 5 15 x 6 6 lug steel rims. $20 for them + shipping.

Updated to $10 + shipping

incoma · 10-17-2005, 12:11 PM

bump

chevyguy_72 · 10-17-2005, 01:42 PM

Might want the 400 crank. Whats the shipping to 68505? PM me.

incoma · 10-17-2005, 01:48 PM

What's the best way to ship a crank? Greyhound?

incoma · 10-18-2005, 12:56 PM

chevyguy_72 - I think the shipping would be about $20 if the crank weighs less than 70 lbs. I got the quote from fedex.com.

incoma · 10-25-2005, 10:20 PM

I've updated the post with sales and new prices. I've got to pay my dues to the board, then I'll put some more odds and ends on here.

10-13-2005, 09:55 PM	#1
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Misc leftovers for sale, maybe trade Ok, I just moved into my new house and I don't have space. I had hoped to have a post of "for sale" stuff after I completed my restoration, but can't. I must get rid of some of this stuff. I'm going to post this stuff with several replies to the thread, so keep reading. If any Oklahoma guys want to meet at the Chickasha swap this weekend, I'll be there Saturday. First off is a driver quality cargo light, new LMC fuel neck filler, and new black cover for a rear view mirror. All one lot - $15 shipped. ============> Sold I also have a set of small block chevy head shims, to decrease your compression. They are used, but still usable. These are .030 shims. $10 shipped. Next is 2 sets of driver quality window vent handles. $15 shipped. ==========> Sold If you have questions, need more pics, or want to make an offer, please let me know. I need to get some space back. Attached Images Last edited by incoma; 10-25-2005 at 10:17 PM.

10-13-2005, 09:57 PM	#2
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	more stuff Next is a set of NEW Dark Green 70-71 door panel covers. My movers accidently rolled a section of the panels so the mylar is peeling just a tad, and has some light wrinkle marks in the clearcoat. They are still in the bag. $100 shipped. ========> Updated How about $70 + shipping Attached Images Last edited by incoma; 10-25-2005 at 10:21 PM.

10-13-2005, 10:00 PM	#3
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	more stuff Dash pads Dark olive green. I have 2. One is my original which wouldn't be bad for a driver. It's bumpy. The foam has become a bit misformed after 35 years. The green vinyl looks great. Its the one on the right side of the pictures. $35 + shipping =============> Still Available - $25 + shipping The one on the left is brand New, never installed. The green is just a tad bit too light for my truck's paint and didn't look right. It's a solid molded pad, no vinyl. $40 + shipping =======> Still Available - $30 + shipping Attached Images Last edited by incoma; 10-25-2005 at 10:18 PM.

10-13-2005, 10:02 PM	#4
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	more stuff This was a brand new never installed headliner chrome. The movers bent the plastic, and scratched another section. 2 of the sections are perfect and ready to install. A skilled guy with some time may be able to bend the bent section back into form. I don't have the patience. $60 shipped. ========> Sold Attached Images Last edited by incoma; 10-25-2005 at 10:18 PM.

10-13-2005, 10:05 PM	#5
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	more stuff I have a FULL set of SWB trim with woodgrain. A few of the sections are bent or have dings. Most of the pieces are in good shape. I'd say that this set is 50% driver 50% not so driver. A few sections such as the door pieces look new or excellent driver. I do have tubes to ship it in. $100 + shipping. =========> Sold Attached Images Last edited by incoma; 10-25-2005 at 10:18 PM.

10-13-2005, 10:13 PM	#6
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	last stuff I also have a 400 cast crank ground 10/10 that needs polishing - $100 2 327 steel small journal cranks - one looks like it needs some welding, one needs balancing - $10 each. steel 350 crank that needs grinding - $100 I don't want to ship the cranks but can. I'd prefer to have you look at this stuff before buying.

10-13-2005, 10:30 PM	#7
ol yellow 72 Registered User Join Date: Aug 2005 Location: kentucky Posts: 210	intrested in the new dash pad how much to ship to 40008

10-13-2005, 10:36 PM	#8
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	I will take the vent window handles. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

10-14-2005, 05:11 PM	#9
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	ol yellow 72 - I'm getting a quote of $9.50 on fedex.com for ground freight. Rickstrucks - they're yours. you can paypal me at jroy74@cox.net or pm me for an address for a money order - unless you're going to be in Chickasha this weekend.

10-14-2005, 06:55 PM	#10
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	I forgot to add that I have 5 15 x 6 6 lug steel rims. $20 for them + shipping. Updated to $10 + shipping Last edited by incoma; 10-18-2005 at 12:52 PM.

10-14-2005, 10:40 PM	#11
kndall Registered User Join Date: Nov 2004 Location: Moore, OK..73160 Posts: 207	do you have a picture of the rims? I would pick them up since I am local. also interested in the cargo light lot of parts. Don't waste your time driving to Chickasha, I went today and EVERYTHING was WAYY overpriced. If I had known before I left I wouldn't have wasted the gas. just an fyi. Last edited by kndall; 10-14-2005 at 10:42 PM.

10-15-2005, 03:13 AM	#12
zooza1 Registered User Join Date: Sep 2004 Location: Linden, Tn. Posts: 232	Count the swb trim as mine. let me pm you with my home info. i am out of the country and have to go with a middle man. if thats acceptable. pm coming up.......

10-15-2005, 12:10 PM	#14
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	pics for kndall Here's some pics of the rims. I forgot to add that I have 5 15 x 6 6 lug steel rims. $20 for them + shipping. Updated to $10 + shipping Attached Images Last edited by incoma; 10-25-2005 at 10:19 PM.

10-17-2005, 12:11 PM	#15
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Misc leftovers for sale, maybe trade bump

10-17-2005, 01:42 PM	#16
chevyguy_72 Vintage Evil Join Date: Aug 2005 Location: Hastings, Nebraska Posts: 956	Re: Misc leftovers for sale, maybe trade Might want the 400 crank. Whats the shipping to 68505? PM me.



Register or Log In To remove these advertisements.

10-17-2005, 01:48 PM	#17
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Misc leftovers for sale, maybe trade What's the best way to ship a crank? Greyhound?

10-18-2005, 12:56 PM	#18
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Misc leftovers for sale, maybe trade chevyguy_72 - I think the shipping would be about $20 if the crank weighs less than 70 lbs. I got the quote from fedex.com.

10-25-2005, 10:20 PM	#19
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Misc leftovers for sale, maybe trade I've updated the post with sales and new prices. I've got to pay my dues to the board, then I'll put some more odds and ends on here.

Register or Log In To remove these advertisements.