Duramax/hypertech mileage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

northerngmc · 09-28-2005, 02:46 PM

Anyone here have a Duramax with a Hypertech pwoer programmer?

They claim a potential for mileage improvement, any truth to this?

Joe67 · 09-29-2005, 09:34 AM

Depending on how you set these programmers up, I can see an increase in MPG.

Of all the programmers out here for the Dmax, Hypertech would be my last choice.

northerngmc · 09-29-2005, 09:45 AM

Why would Hypertech be your last choice?

What would be your first?

Joe67 · 09-29-2005, 10:19 AM

Quite a few guys on FullSizeChevy.com use the Predator or Edge programmers with the Duramax powertrain.

Others use a custom tuned PCM from Westers (Lyndon Wester 888-937-8371 ) or one of the other tuners.

djracer · 10-07-2005, 07:52 PM

I had a duramax with a diablo predator and it helped a little but not much. Now horsepower was off the chain. A stock mustang would be looking at the tailgate of my 4x4 crewcab! I was never happy with the fuel mileage!

1967k30 · 10-07-2005, 09:49 PM

My pick would be a TTS.It will give you 500 rear wheel HP but requires tranny or clutch modd's. The Edge,Predater,and Quadzilla seem to be popular picks.For more info go to thedieselplace.com.

Joe67 · 10-19-2005, 11:17 AM

Looks like Jesse at Wait4me is tuning Dmax trucks now

Quote:

Hi guys. The duramax computer is finally hacked! I can now offer you guys completly custom Duramax computer programming. There are Hundreds of things i can change, and i have several hp ratings that you can choose. THERE IS NO LIMIT TO WHAT i can do with them horsepower wise. But you will break things if you go to HIGH on power ratings of coarse.. But i can do the same power levels that any handheld could ever do, and they are perfectly safe. I can change tire sizes, idle speeds, All fuel tables, Glow plugs, Maf tables, ect.. even boost controller stuff..

Mail in pcm programming, and core service is available for them already... Let the fun begin...

--------------------------------------------------------------------------------

Performance tune on your pcm for any vehicle i support for $75.00
Performance tune and a spare computer you get to keep for $150.00
Also, If you guys send me your core back i refund you $60.00!!
Call or email me for details. 574-267-3630
www.wait4meperformance.com

northerngmc · 10-19-2005, 12:11 PM

Thanks for the update.

Did this come off thedieselplace.com?

I have been reading some of the diesel forums and everyone there is out for hp and torque, not fuel mileage.

I live about 800 miles north of Edmonton Alberta and make about 4-6 trips a year, mainly empty. I love the 310 hp and 590 lb/ft when pulling, but I would love to be able to detune the power for mileage when running down the highway empty with the cruise set at 70 mph.

So for $150 he will send me a new computer with programming I want.
I think I will email him.

Joe67 · 10-19-2005, 12:17 PM

It may be there, I pulled it from FSC this morning.

I'd call him directly, it is much easier to get ahold of him on the phone.

He did my 5.3l Vortec tune for me

northerngmc · 11-07-2005, 04:12 PM

I bought an Edge EZ, which claims to have better mileage when left in positon #1. I will see when it arrives!

09-29-2005, 09:34 AM	#2
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Depending on how you set these programmers up, I can see an increase in MPG. Of all the programmers out here for the Dmax, Hypertech would be my last choice. __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

09-29-2005, 09:45 AM	#3
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Why would Hypertech be your last choice? What would be your first? __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

09-29-2005, 10:19 AM	#4
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Quite a few guys on FullSizeChevy.com use the Predator or Edge programmers with the Duramax powertrain. Others use a custom tuned PCM from Westers (Lyndon Wester 888-937-8371 ) or one of the other tuners. __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

10-07-2005, 07:52 PM	#5
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,892	I had a duramax with a diablo predator and it helped a little but not much. Now horsepower was off the chain. A stock mustang would be looking at the tailgate of my 4x4 crewcab! I was never happy with the fuel mileage! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

10-07-2005, 09:49 PM	#6
1967k30 Senior Member Join Date: Sep 2005 Location: NE Posts: 363	My pick would be a TTS.It will give you 500 rear wheel HP but requires tranny or clutch modd's. The Edge,Predater,and Quadzilla seem to be popular picks.For more info go to thedieselplace.com. __________________ 01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel.

09-28-2005, 02:46 PM	#1
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Duramax/hypertech mileage Anyone here have a Duramax with a Hypertech pwoer programmer? They claim a potential for mileage improvement, any truth to this? __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

10-19-2005, 12:11 PM	#8
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: Duramax/hypertech mileage Thanks for the update. Did this come off thedieselplace.com? I have been reading some of the diesel forums and everyone there is out for hp and torque, not fuel mileage. I live about 800 miles north of Edmonton Alberta and make about 4-6 trips a year, mainly empty. I love the 310 hp and 590 lb/ft when pulling, but I would love to be able to detune the power for mileage when running down the highway empty with the cruise set at 70 mph. So for $150 he will send me a new computer with programming I want. I think I will email him. __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!

10-19-2005, 12:17 PM	#9
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,733	Re: Duramax/hypertech mileage It may be there, I pulled it from FSC this morning. I'd call him directly, it is much easier to get ahold of him on the phone. He did my 5.3l Vortec tune for me __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

11-07-2005, 04:12 PM	#10
northerngmc Registered User Join Date: Jan 2004 Location: Whitehorse YK Canada Posts: 2,651	Re: Duramax/hypertech mileage I bought an Edge EZ, which claims to have better mileage when left in positon #1. I will see when it arrives! __________________ Blaine 59 GMC 9314 a.k.a. Whoopee 68 C20 50th Anniversary a.k.a. The Rat http://www.flickr.com/photos/northerngmc/ http://www.members.tripod.com/P-wee/index_032.htm 1.61803 is one H of a lot better than 3.14159, no really it is!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.