Emblems for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rod · 10-09-2005, 10:50 PM

Here's a few of the emblems I have for sale.

20 a pair plus shipping for normal ones unless noted here. Exceptions are 350 engine ones..those are 15 a pair. Cheyenne 10's are 20 single or 40 a pair. CST10 are 40 also. Sierra Grande are 70 for the pair. Sierras $40

67 GMC custom ones sold conditionally already as well as 1 set of CST ones already spoken for.

I got more than this and other ones not shown.

Ill try to keep this list updated below.
1 set CSTdoor emblems sold.
930 GMC sold.
Jimmy emblems sold.
67 GMC Custom door emblems sold.
From Canada using Canada postal system.

**too much stuff** · 10-09-2005, 11:41 PM

Is the gmc 930 still up for grabs? condition? Thanks.

Rod · 10-09-2005, 11:48 PM

Still for grabs..I'll PM you then.

Longhorn Man · 10-09-2005, 11:58 PM

Any longhorn badges? One of mine fall off sometime last week.

(

Rod · 10-10-2005, 12:01 AM

No longhorn badges.

Rod · 10-10-2005, 12:19 AM

heres a closer look at the 930 GMC emblem..looks good..very lttle pitting...all three studs there..even 2 nuts included.

HeavyD · 10-10-2005, 12:26 AM

I was just going to grab that for you Eric..looks like you finally have a 930 emblem.

Premium72 · 10-10-2005, 12:42 AM

need a set of the Custom/10 ones. lost my originals in the tear down process...

paypal? thanx. drop me an email..
urbanlayers01@aol.com

HeavyD · 10-10-2005, 12:45 AM

Rod do you have any GMC 920 emblems?

Rod · 10-10-2005, 01:19 AM

I gotta 910..maybe more than one..dont think I have a 920...but Ill give another look tomorrow.

Premium I'll email you.

**special-K** · 10-10-2005, 08:10 AM

Never seen those`67 GMC Customs for the door.Is that a Canadian thing?I`ve seen the verticle fender badges.Any pitting on the SierraGrandes?

Rod · 10-10-2005, 10:41 AM

Well I've never seen the verticle fender badges up here in Canada..so may be it is just a Canadian thing.
They are a bit longer than the CST door emblems but the stud spacing on back is the same.

The Sierra Grande emblems I've had in a box for 21 years..there nice. The studs on the back were removed and they were double back taped to a truck i had in the early 80's, much like the way they attach emblems to the newer cars and trucks Most stuff is double back taped now on vehicles.. I've had parts put away for these trucks much longer than this boards been around and longer than some members here have been alive.
Le tme know what your interested in. The posts getting long and with dial up internet connection, its taking longer to download each time for me. I may have to split some of this up in the near future to save me some time.

**too much stuff** · 10-10-2005, 11:27 PM

Rod, i will take the 930 emblem. Will ship $$$ out on wednesday.
Dalton, i appreciate ya watching for me!!!! I would still take one more 930 emblem and a pair of 920 emblems.

Rod · 10-10-2005, 11:43 PM

Thats it for 930 or 920 emblems..got none. All I got are 910

I found a pair of Custom20 today $20 for the pair.
I found set of 4 wheel drive emblems also a few pits on those... 20 for the pair.
Found another set of C10 67-68 but the red bowties are blue on this set compared to the red 67 style in first pic.

Rod · 11-04-2005, 06:45 PM

ttt

BobS · 11-06-2005, 08:22 PM

Any 68-69 GMC 2500 or 3500 V-6 emblems?

Bob

Rod · 11-07-2005, 12:44 AM

Nothing with a V6, might have some 2500 but no V6 designation on the emblem.

68gmcdually · 11-08-2005, 11:22 PM

Darn it, I missed out on that 930 emblem. I have been looking for a second one since I bought my first one from Dean & Crystal (longhorn71). Oh well I have the one good one from them and one not so good one from my uncle. Someday I will find another good one. Has anyone ever heard of a 950 emblem or am I being stringed along. A local guy promised me one from a wrecked big truck.

Rod · 11-09-2005, 12:53 AM

I found the other 930 GMC emblem..I had 2 actually..PM sent.

68gmcdually · 11-09-2005, 11:03 AM

PM sent back.

67chevemall · 11-11-2005, 05:13 PM

Quote:

Originally Posted by 68gmcdually

Darn it, I missed out on that 930 emblem. I have been looking for a second one since I bought my first one from Dean & Crystal (longhorn71). Oh well I have the one good one from them and one not so good one from my uncle. Someday I will find another good one. Has anyone ever heard of a 950 emblem or am I being stringed along. A local guy promised me one from a wrecked big truck.

Rod to the rescue! Good stuff..

I'm looking for the cst emblem for the top of the 67 door?

Rod · 11-12-2005, 11:46 AM

Got them...they are the set as shown...well the better ones are sold of course,,everyone wants the better ones..lol.

67chevemall · 11-13-2005, 10:29 AM

???

Rod · 11-13-2005, 01:06 PM

Quote:

Originally Posted by 67chevemall

Rod to the rescue! Good stuff..

I'm looking for the cst emblem for the top of the 67 door?

That word is Custom not CST as you said in the previous post you made.. Those are 67 GMC Custom emblems...a Canadian thing from what I think... as I have seen other custom emblem styles in 67 also on GMC's.
If you'll notice up in the first post in this thread those ones you circled are spoken for.

67chevemall · 11-13-2005, 06:06 PM

my bad. worth a try though. I'll buy those ones if anybody has them OEM

10-09-2005, 10:50 PM	#1
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Emblems for sale Here's a few of the emblems I have for sale. 20 a pair plus shipping for normal ones unless noted here. Exceptions are 350 engine ones..those are 15 a pair. Cheyenne 10's are 20 single or 40 a pair. CST10 are 40 also. Sierra Grande are 70 for the pair. Sierras $40 67 GMC custom ones sold conditionally already as well as 1 set of CST ones already spoken for. I got more than this and other ones not shown. Ill try to keep this list updated below. 1 set CSTdoor emblems sold. 930 GMC sold. Jimmy emblems sold. 67 GMC Custom door emblems sold. From Canada using Canada postal system. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. Last edited by Rod; 11-04-2005 at 06:44 PM.

10-09-2005, 11:41 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Is the gmc 930 still up for grabs? condition? Thanks. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-10-2005, 12:19 AM	#6
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	heres a closer look at the 930 GMC emblem..looks good..very lttle pitting...all three studs there..even 2 nuts included. Attached Images __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

10-10-2005, 12:26 AM	#7
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	I was just going to grab that for you Eric..looks like you finally have a 930 emblem. __________________ "You can take the man out of PA, but you can't take PA out of the man"

10-10-2005, 12:45 AM	#9
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Rod do you have any GMC 920 emblems? __________________ "You can take the man out of PA, but you can't take PA out of the man"

10-09-2005, 11:48 PM	#3
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Still for grabs..I'll PM you then.

10-09-2005, 11:58 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Any longhorn badges? One of mine fall off sometime last week. (

10-10-2005, 12:01 AM	#5
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	No longhorn badges.

10-10-2005, 12:42 AM	#8
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	need a set of the Custom/10 ones. lost my originals in the tear down process... paypal? thanx. drop me an email.. urbanlayers01@aol.com

10-10-2005, 01:19 AM	#10
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	I gotta 910..maybe more than one..dont think I have a 920...but Ill give another look tomorrow. Premium I'll email you.

10-10-2005, 08:10 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Never seen those`67 GMC Customs for the door.Is that a Canadian thing?I`ve seen the verticle fender badges.Any pitting on the SierraGrandes? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-10-2005, 10:41 AM	#12
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Well I've never seen the verticle fender badges up here in Canada..so may be it is just a Canadian thing. They are a bit longer than the CST door emblems but the stud spacing on back is the same. The Sierra Grande emblems I've had in a box for 21 years..there nice. The studs on the back were removed and they were double back taped to a truck i had in the early 80's, much like the way they attach emblems to the newer cars and trucks Most stuff is double back taped now on vehicles.. I've had parts put away for these trucks much longer than this boards been around and longer than some members here have been alive. Le tme know what your interested in. The posts getting long and with dial up internet connection, its taking longer to download each time for me. I may have to split some of this up in the near future to save me some time. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

10-10-2005, 11:27 PM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Rod, i will take the 930 emblem. Will ship $$$ out on wednesday. Dalton, i appreciate ya watching for me!!!! I would still take one more 930 emblem and a pair of 920 emblems. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-10-2005, 11:43 PM	#14
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Thats it for 930 or 920 emblems..got none. All I got are 910 I found a pair of Custom20 today $20 for the pair. I found set of 4 wheel drive emblems also a few pits on those... 20 for the pair. Found another set of C10 67-68 but the red bowties are blue on this set compared to the red 67 style in first pic.

11-04-2005, 06:45 PM	#15
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Re: Emblems for sale ttt



Register or Log In To remove these advertisements.

11-06-2005, 08:22 PM	#16
BobS Senior Member Join Date: May 2001 Location: West Central Minnesota Posts: 568	Re: Emblems for sale Any 68-69 GMC 2500 or 3500 V-6 emblems? Bob __________________ V-6....only GMC Trucks have it! 62 GMC W5000 NAPCO-V6 65 GMC 2500 NAPCO Panel-V6 66 GMC 1000-V6 66 GMC 1500-V6 67 GMC K1500-SBC (originally a KM-V6) 68 GMC C1500-V6 68 GMC C1500-V6 68 GMC Suburban C2500 70 Chevy K20-SBC 71 Chevy C30 Longhorn-SBC 72 GMC Suburban C1500-BBC 72 Chevy C10-SBC 72 GMC C5500-ToroFlow Diesel

11-07-2005, 12:44 AM	#17
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Re: Emblems for sale Nothing with a V6, might have some 2500 but no V6 designation on the emblem.

11-08-2005, 11:22 PM	#18
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,455	Re: Emblems for sale Darn it, I missed out on that 930 emblem. I have been looking for a second one since I bought my first one from Dean & Crystal (longhorn71). Oh well I have the one good one from them and one not so good one from my uncle. Someday I will find another good one. Has anyone ever heard of a 950 emblem or am I being stringed along. A local guy promised me one from a wrecked big truck. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed, Last edited by 68gmcdually; 11-09-2005 at 11:02 AM.

11-09-2005, 12:53 AM	#19
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Re: Emblems for sale I found the other 930 GMC emblem..I had 2 actually..PM sent.

11-09-2005, 11:03 AM	#20
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,455	Re: Emblems for sale PM sent back. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

11-12-2005, 11:46 AM	#22
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Re: Emblems for sale Got them...they are the set as shown...well the better ones are sold of course,,everyone wants the better ones..lol.

11-13-2005, 10:29 AM	#23
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Emblems for sale ??? __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD Last edited by 67chevemall; 07-09-2010 at 02:27 PM.

11-13-2005, 06:06 PM	#25
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Emblems for sale my bad. worth a try though. I'll buy those ones if anybody has them OEM

Register or Log In To remove these advertisements.