Binding auto shifter....TIP! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Longhorn Man · 09-02-2002, 11:17 PM

All the truck I have had to date were automatics, with a column shifter..and none of them worked for crap.
I was diggin in the Longhorn's column, installing the new cruise control switch, and I decided to investigate this problem a little.
If you rip off the wheel, turn signal assembly, the first colar, then the shifter...remove the colar that holds the shifter handle, and coat all the internials with anti-sieze compound, it'll feel like new!
I just thought i'd pass the info.

chevy garage · 09-02-2002, 11:21 PM

Thanks, I'll have to try that.

09-02-2002, 11:17 PM	#1
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Binding auto shifter....TIP! All the truck I have had to date were automatics, with a column shifter..and none of them worked for crap. I was diggin in the Longhorn's column, installing the new cruise control switch, and I decided to investigate this problem a little. If you rip off the wheel, turn signal assembly, the first colar, then the shifter...remove the colar that holds the shifter handle, and coat all the internials with anti-sieze compound, it'll feel like new! I just thought i'd pass the info.

09-02-2002, 11:21 PM	#2
chevy garage Registered User Join Date: Aug 2002 Location: Maryville, TN Posts: 239	Thanks, I'll have to try that.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.