FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Livrat · 11-04-2005, 02:18 PM

For Sale 1970 GMC 3/4ton 4X4 rolling chassis.. Upgraded to disc brakes.. later model 14bolt rear end.. 3:73 gears with "Loc Rite" positraction, Warn Hubs. 4 inch suspension lift with Rancho RS 5000 shocks.. Turbo 350 trans with NP205 transfer case, Power steering box.. Will need carrier and gears installed in the front end (I want to keep the front "loc rite" posi) I have an open carrier and gears to go with it..
$700 or closest offer.. Too big to ship...
Feel free to PM, Email or even call for more info,
Thanks
Mark.. aka:Livrat
206-406-2719
livrat@aol.com

*FormerMember* · 11-04-2005, 05:26 PM

Lockrite goes into an open carrier. It's called a "lunch box locker" because it replaces the spider gears, only.

No need to reshim after installing one, as the ring can typically stay on the carrier.

72orangepumpkin · 11-05-2005, 01:07 PM

If you decide to part out, let me know. I would be interested in the front leaf springs, could meet you at either the Seattle or Edmonds Ferry terminal for P/U.

Americanrider · 11-05-2005, 01:34 PM

Second in line for front springs if they are 44inches, also need rears 56inches.

Livrat · 11-05-2005, 06:25 PM

Hi all..
I will keep parting it out in the back of my mind.. Anyone else need any of the larger parts off of it.. Like rear end or tranny and transfer case?

muddyole 69 · 11-05-2005, 11:48 PM

would be interested in the rear locker and gears if you part it thanks Mike

roger0080 · 11-08-2005, 06:25 PM

I would be interested in the rear spring hanger AND frame mount brackets.

**BAD4X4** · 11-10-2005, 09:24 PM

Livrat you have a pm.

69TowRig · 11-12-2005, 12:43 PM

Dibs on rear springs if you part it!

HeavyK20 · 11-12-2005, 07:07 PM

If you decide to part it out, I will take the large cross member that mounts between the forward spring hangers on the rear axle

leadfoot067 · 11-16-2005, 03:52 PM

still got this?

Livrat · 11-16-2005, 09:45 PM

leadfoot067,
Yes I do still have it.. I Just kinda put it on the back burner as I have not had the time to get the loc rite out of the front.. Plus I have been eyeing a 70 GMC 2WD with a nice body thats for sale.. Give me a call if you would like to know more
Mark

leadfoot067 · 11-17-2005, 11:52 AM

Quote:

Originally Posted by Livrat

leadfoot067,
Yes I do still have it.. I Just kinda put it on the back burner as I have not had the time to get the loc rite out of the front.. Plus I have been eyeing a 70 GMC 2WD with a nice body thats for sale.. Give me a call if you would like to know more
Mark

ya i have a decent 71 2wd with a bent frame...was having the body swap thoughts....

11-04-2005, 02:18 PM	#1
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle For Sale 1970 GMC 3/4ton 4X4 rolling chassis.. Upgraded to disc brakes.. later model 14bolt rear end.. 3:73 gears with "Loc Rite" positraction, Warn Hubs. 4 inch suspension lift with Rancho RS 5000 shocks.. Turbo 350 trans with NP205 transfer case, Power steering box.. Will need carrier and gears installed in the front end (I want to keep the front "loc rite" posi) I have an open carrier and gears to go with it.. $700 or closest offer.. Too big to ship... Feel free to PM, Email or even call for more info, Thanks Mark.. aka:Livrat 206-406-2719 livrat@aol.com Attached Images

11-04-2005, 05:26 PM	#2
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle Lockrite goes into an open carrier. It's called a "lunch box locker" because it replaces the spider gears, only. No need to reshim after installing one, as the ring can typically stay on the carrier.

11-05-2005, 01:07 PM	#3
72orangepumpkin Father of a Chevy Boy! Join Date: Sep 2005 Location: Poulsbo, Washington Posts: 35	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle If you decide to part out, let me know. I would be interested in the front leaf springs, could meet you at either the Seattle or Edmonds Ferry terminal for P/U. __________________ 72 Chevy 4x4 Restoration in progress!

11-05-2005, 01:34 PM	#4
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle Second in line for front springs if they are 44inches, also need rears 56inches.

11-05-2005, 06:25 PM	#5
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle Hi all.. I will keep parting it out in the back of my mind.. Anyone else need any of the larger parts off of it.. Like rear end or tranny and transfer case?

11-05-2005, 11:48 PM	#6
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle would be interested in the rear locker and gears if you part it thanks Mike __________________ hav'n fun be'n me

11-08-2005, 06:25 PM	#7
roger0080 Registered User Join Date: Nov 2000 Location: Carver County, Minnesota, USA Posts: 626	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle I would be interested in the rear spring hanger AND frame mount brackets. __________________ 72 Chev C-10 90% restored (former AZ truck) ... 71 Chev K-20 Cheyenne my vacation crusier... 72 Chev C-10 Now retired and striped after many faithful miles... 72 GMC 1500 Retired to the junk yard after bought new in '71...

11-10-2005, 09:24 PM	#8
BAD4X4 Senior Member Join Date: Jan 2003 Location: La pine Oregon Posts: 1,668	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle Livrat you have a pm. __________________ 1972 Cheyenne K-30 6"lift {502 PROJECT} 1972 Cheyenne K-30 8"lift 454 450hp {Ol'Blue} 1972 Cheyenne K-20 Custom Stretch 6" lift 454 1972 Custom Deluxe K-20 4" lift 2007 GMC Crew Cab Diesel 6"lift {The Tow Rig 2017 Ford F-350 Crew Cab 6.7 6"lift (Wife's) 1977 El Camino SS Grandpa baught new 1986 K-30 Crew Cab 502 1955 Chevy 2-Door gasser 454 550hp{project} 1956 Chevy Bel-Air 2-Door hardtop 572 700hp 1979 Ford F-350 All Original 4x4 (Wife's)

11-12-2005, 12:43 PM	#9
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle Dibs on rear springs if you part it! __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

11-12-2005, 07:07 PM	#10
HeavyK20 Registered User Join Date: Dec 2001 Location: New Richmond, WI Posts: 547	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle If you decide to part it out, I will take the large cross member that mounts between the forward spring hangers on the rear axle __________________ Eric 1969 K20, 465/205 package Last edited by HeavyK20; 11-12-2005 at 07:09 PM.

11-16-2005, 03:52 PM	#11
leadfoot067 horsepower junkie Join Date: Aug 2003 Location: graham, washington Posts: 326	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle still got this? __________________ 67 short wide box,350/700r4/3.73posi 71 olds cutlass "S" mom bought new..12.30s@113MPH

11-16-2005, 09:45 PM	#12
Livrat Member #1049 Join Date: Jun 2000 Location: Troy Montana Posts: 3,940	Re: FS: 70 GMC 3/4ton 4X4 Rolling chassis.. Seattle leadfoot067, Yes I do still have it.. I Just kinda put it on the back burner as I have not had the time to get the loc rite out of the front.. Plus I have been eyeing a 70 GMC 2WD with a nice body thats for sale.. Give me a call if you would like to know more Mark



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.