Pics of trucks with 15X10 rims? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bigcarguy · 09-03-2002, 10:43 PM

Can I run 15X10" rims all around on my truck? How do I measure what kind of backspacing I need? I'd also like to see pics of 15X10's on our trucks. Thanks.

Longhorn Man · 09-03-2002, 10:52 PM

Is 15X 9.5 good enough for you? Stock height in the rear, saggin in the front (500,000 miles will do that to original springs)
I don't know the back spacing, but i may be able to find out come this weekend for you.
Oh, and it's a coil rear too.

Chevy Punk · 09-03-2002, 10:55 PM

To find your max backspacing, Measure from the inner fender to were the wheel mounts on the axle minus 2 inches or so for the tire and you got it.

*Zkast* · 09-03-2002, 11:02 PM

I've always run 15x8 (front) and 15x10 on the rear. Truck was lowered in this pic.
I dont remember the backspacing though sorry...

"71 Chevy 15x10 on rear, no rubbing problems

flyin99 · 09-03-2002, 11:14 PM

mine...........well, before the resto anyways 15x7 and 15x10's

orange72 · 09-03-2002, 11:51 PM

heres a pic of my truck.

Benrs86 · 09-03-2002, 11:59 PM

i got 15x10s all around with 295/50. stock height, leaf rears (sagging huge) and one cut coil in front. plenty of room. 3.75 inch backspacing. hope this helps, Ben

Benrs86 · 09-04-2002, 12:00 AM

oops, in that pic the front is stock height. heres one after the cut

09-03-2002, 10:43 PM	#1
bigcarguy Finally a Bulldawg Join Date: Apr 2001 Location: Athens, Georgia Posts: 220	Pics of trucks with 15X10 rims? Can I run 15X10" rims all around on my truck? How do I measure what kind of backspacing I need? I'd also like to see pics of 15X10's on our trucks. Thanks. __________________ Ah yes, the college life. School all morning, work all night, study when ya can. Uh...

09-03-2002, 10:52 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Is 15X 9.5 good enough for you? Stock height in the rear, saggin in the front (500,000 miles will do that to original springs) I don't know the back spacing, but i may be able to find out come this weekend for you. Oh, and it's a coil rear too. Attached Images

09-03-2002, 11:02 PM	#4
Zkast Account Suspended Join Date: May 2002 Location: Olathe, Kansas Posts: 929	I've always run 15x8 (front) and 15x10 on the rear. Truck was lowered in this pic. I dont remember the backspacing though sorry... "71 Chevy 15x10 on rear, no rubbing problems Last edited by Zkast; 09-03-2002 at 11:06 PM.

09-03-2002, 11:14 PM	#5
flyin99 creator of kong Join Date: Mar 2001 Location: Kentucky Posts: 538	mine...........well, before the resto anyways 15x7 and 15x10's Attached Images

09-03-2002, 11:51 PM	#6
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	heres a pic of my truck. __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

09-03-2002, 10:55 PM	#3
Chevy Punk Registered User Join Date: Apr 2002 Location: Blaine WA Posts: 455	To find your max backspacing, Measure from the inner fender to were the wheel mounts on the axle minus 2 inches or so for the tire and you got it.

09-03-2002, 11:59 PM	#7
Benrs86 Registered User Join Date: Feb 2000 Location: Brandon, SD, USA Posts: 1,292	i got 15x10s all around with 295/50. stock height, leaf rears (sagging huge) and one cut coil in front. plenty of room. 3.75 inch backspacing. hope this helps, Ben Attached Images __________________ Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04

09-04-2002, 12:00 AM	#8
Benrs86 Registered User Join Date: Feb 2000 Location: Brandon, SD, USA Posts: 1,292	oops, in that pic the front is stock height. heres one after the cut Attached Images __________________ Brandon, SD 69 GMC 1/2 ton 2wd wide long bed with wood 3 on the tree 350 engine 4 bolt main rv cam AIM = Alphray04



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.