Need clarification re: my tilt column for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HeavyD · 11-19-2005, 03:41 AM

I have a board member interested in my column, but he is concerned it might be a converted van unit because of the clipped plug wires. To my knowledge the stubby splined end would indicate a true truck tilt, and I see no evidence of safety switch relocation, but I thought I would see what you board members thought. What do I have?? Thanks.

Longhorn Man · 11-19-2005, 06:56 AM

looks like the real deal.
The harness is probably fropm some one installing a replacement turn signal switch and not having an adapter to use.

70GMCer · 11-19-2005, 08:20 AM

Looks right to me also.....The van tilts have the neutral switch further up on the column. At least mine did.......

**special-K** · 11-19-2005, 09:21 AM

You`re right,it`s a truck unit with questionable wiring.As you described in your listing.

jsbgump · 11-19-2005, 01:02 PM

Looks like a real truck one to me.

HeavyD · 11-19-2005, 01:03 PM

Thanks everyone.

Rod · 11-19-2005, 01:34 PM

Take a look at the neutral safety switch and see how its hooked into the switch..if its a tab thats been folded back from the original inner tube into a grooved switch tab ...well then its original. It looks original to me from what I see here. Rod

69TowRig · 11-19-2005, 04:18 PM

My truck's original column had the hack-n-tap done to the harness. Someone replaced the column switch but couldn't find the half-moon style plug, so they hacked it. That's what you have there.

Rod · 11-19-2005, 08:59 PM

Some people just dont know how to get the switch plug through the column..so they hack it and attach it after...thats what I see there. So I agree with 69TowRig on that.

70short/step · 11-19-2005, 09:35 PM

If you ever have seen the van and truck tilts together would never forget the differences. Like said above....The short splined shaft is a truck and the position of the neutral safety switch is also a truck. Maybe we need to get someone who has a pic of the two side by side and keep it posted in a sticky. Heck there might be a pic in the FAQs
P.S.
I just installed a van tilt in my truck a couple of weeks ago so I know the one you have there is a truck!

**PICKMUP** · 11-19-2005, 09:45 PM

Left to right:
Van/Van with N switch in PU position/real 71-2 PU.

HeavyD · 11-20-2005, 03:23 AM

Hey, that is a good pic for comparison. Thanks again for all the help guys.

11-19-2005, 03:41 AM	#1
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,179	Need clarification re: my tilt column for sale I have a board member interested in my column, but he is concerned it might be a converted van unit because of the clipped plug wires. To my knowledge the stubby splined end would indicate a true truck tilt, and I see no evidence of safety switch relocation, but I thought I would see what you board members thought. What do I have?? Thanks. __________________ "You can take the man out of PA, but you can't take PA out of the man"

11-19-2005, 06:56 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Need clarification re: my tilt column for sale looks like the real deal. The harness is probably fropm some one installing a replacement turn signal switch and not having an adapter to use.

11-19-2005, 08:20 AM	#3
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Need clarification re: my tilt column for sale Looks right to me also.....The van tilts have the neutral switch further up on the column. At least mine did....... __________________ 1997 GMC Sierra Ext 1965 Mustang

11-19-2005, 09:21 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: Need clarification re: my tilt column for sale You`re right,it`s a truck unit with questionable wiring.As you described in your listing. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-19-2005, 01:02 PM	#5
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Need clarification re: my tilt column for sale Looks like a real truck one to me. __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

11-19-2005, 01:03 PM	#6
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,179	Re: Need clarification re: my tilt column for sale Thanks everyone. __________________ "You can take the man out of PA, but you can't take PA out of the man"

11-19-2005, 01:34 PM	#7
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Re: Need clarification re: my tilt column for sale Take a look at the neutral safety switch and see how its hooked into the switch..if its a tab thats been folded back from the original inner tube into a grooved switch tab ...well then its original. It looks original to me from what I see here. Rod __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife.

11-19-2005, 04:18 PM	#8
69TowRig Senior Member Join Date: Jan 2005 Location: Raleigh, NC Posts: 894	Re: Need clarification re: my tilt column for sale My truck's original column had the hack-n-tap done to the harness. Someone replaced the column switch but couldn't find the half-moon style plug, so they hacked it. That's what you have there. __________________ -Chris Building a stripper, one part at a time: 1969 K5, 307, 3spd, 3 seats, hard top. Added Pwr Discs, Pwr Steering, Aux Battery, T-case Skid, Lighted Sidemarkers, HEI, Lock-Right Diff, ECE Class IV Hitch, 32" MT/Rs. Parts to Install: Hand Throttle, Console, Tow Hooks, Dual Horns, AM-FM, Dealer Swing-Away Tire Carrier, Gas Tank Skid. Also building a 1950 Willys CJ-3A and off-roading a 2001 Nissan Frontier on 1-Ton Portals...

11-19-2005, 08:59 PM	#9
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Re: Need clarification re: my tilt column for sale Some people just dont know how to get the switch plug through the column..so they hack it and attach it after...thats what I see there. So I agree with 69TowRig on that.

11-19-2005, 09:35 PM	#10
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: Need clarification re: my tilt column for sale If you ever have seen the van and truck tilts together would never forget the differences. Like said above....The short splined shaft is a truck and the position of the neutral safety switch is also a truck. Maybe we need to get someone who has a pic of the two side by side and keep it posted in a sticky. Heck there might be a pic in the FAQs P.S. I just installed a van tilt in my truck a couple of weeks ago so I know the one you have there is a truck! __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step Last edited by 70short/step; 11-19-2005 at 09:38 PM.

11-19-2005, 09:45 PM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,126	Re: Need clarification re: my tilt column for sale Left to right: Van/Van with N switch in PU position/real 71-2 PU. Attached Images

11-20-2005, 03:23 AM	#12
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,179	Re: Need clarification re: my tilt column for sale Hey, that is a good pic for comparison. Thanks again for all the help guys. __________________ "You can take the man out of PA, but you can't take PA out of the man"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.