Howto: Seal ff 14bolt axels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Coleman · 11-17-2005, 10:14 PM

Dumb question but I can't find any old topics on this. I'm switching out an old ho72 rear end on my 68 k20 for a 14bolt ff rear end. I noticed the last person sealed the axels with silicone, is the a common practice ? I would think I could get gaskets or something better than gooping silicone to seal these axels. The guys at the parts store have no clue.

Mudder · 11-17-2005, 10:37 PM

You talking about the cover? I have seen it done. You can get a gasket for them but I have seen places use silicone.

Coleman · 11-17-2005, 10:55 PM

Nope, the axel part out where your bolt it in by the hub

nu2-72 · 11-18-2005, 11:21 AM

The axles actually have a steel gasket. I cannot find the correct # right now but if you call GM and ask for group 5.819 parts they should be able tolocate it.

**kwmech** · 11-18-2005, 11:05 PM

The steel shim gasket is no longer available at GM. What they have now is a paper gasket. Silicone will work however, just don't get carried away with it.

jims69 · 11-22-2005, 06:31 PM

I believe that it is the same as the Eaton Axle flange gasket
Felpro # 55350, $2 or $3 ea these are the steel ones, makes it alot neater than silicone.

11-17-2005, 10:14 PM	#1
Coleman Registered User Join Date: Nov 2005 Location: Tucson, AZ Posts: 50	Howto: Seal ff 14bolt axels Dumb question but I can't find any old topics on this. I'm switching out an old ho72 rear end on my 68 k20 for a 14bolt ff rear end. I noticed the last person sealed the axels with silicone, is the a common practice ? I would think I could get gaskets or something better than gooping silicone to seal these axels. The guys at the parts store have no clue.

11-17-2005, 10:37 PM	#2
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	Re: Howto: Seal ff 14bolt axels You talking about the cover? I have seen it done. You can get a gasket for them but I have seen places use silicone.

11-17-2005, 10:55 PM	#3
Coleman Registered User Join Date: Nov 2005 Location: Tucson, AZ Posts: 50	Re: Howto: Seal ff 14bolt axels Nope, the axel part out where your bolt it in by the hub

11-18-2005, 11:21 AM	#4
nu2-72 Senior Member Join Date: Apr 2001 Location: Amazonia, Mo. USA Posts: 2,821	Re: Howto: Seal ff 14bolt axels The axles actually have a steel gasket. I cannot find the correct # right now but if you call GM and ask for group 5.819 parts they should be able tolocate it. __________________ 72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide

11-18-2005, 11:05 PM	#5
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,650	Re: Howto: Seal ff 14bolt axels The steel shim gasket is no longer available at GM. What they have now is a paper gasket. Silicone will work however, just don't get carried away with it.

11-22-2005, 06:31 PM	#6
jims69 Registered User Join Date: Feb 2005 Posts: 82	Re: Howto: Seal ff 14bolt axels I believe that it is the same as the Eaton Axle flange gasket Felpro # 55350, $2 or $3 ea these are the steel ones, makes it alot neater than silicone. __________________ Jim SW PA. 69' GMC SWB 4X4 (in progress). 86' GMC LWB 4X4 (daily) 86' Chevy LWB 4X4 (beater)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.