Roll pan, license lights, 67 LWB - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ron · 11-24-2005, 12:20 PM

I installed a roll pan years ago and can't remember what brand it is, I
THINK it's a Sir Michaels but I'm not sure. I need the two license plate
lights for it, the holes in the roll pan are "D" shaped, do any of you know where I can get these?

Thanks Ron

**Boog** · 11-24-2005, 12:57 PM

Most any of your parts stores that have replacement lamps like tail, turn, backup, etc, should have what you need or one that sells bumpers should have them also.

Ron · 11-24-2005, 01:05 PM

Quote:

Originally Posted by Boog

Most any of your parts stores that have replacement lamps like tail, turn, backup, etc, should have what you need or one that sells bumpers should have them also.

The parts store has the round ones for bumpers, not the "D" shaped ones for roll pans.

MAR-Ktech · 11-24-2005, 02:36 PM

Ron, that is an older Mar-K pan. The tag lites are still in stock, part number 100865. Try this link to the catalog pdf http://www.mar-k.com/rear_pans.pdf . I sometimes have trouble with the link but hopefully it will work. If not just check the partnumber on our online catalog.

Mar-Ktech

Ron · 11-25-2005, 07:05 PM

Quote:

Originally Posted by MAR-Ktech

Ron, that is an older Mar-K pan. The tag lites are still in stock, part number 100865. Try this link to the catalog pdf http://www.mar-k.com/rear_pans.pdf . I sometimes have trouble with the link but hopefully it will work. If not just check the partnumber on our online catalog.

Mar-Ktech

I had trouble with the link also. Do these lights fit the "D" shaped hole? Thanks

matthufham · 11-25-2005, 07:18 PM

link works, this is what he was mentioning.

71swb4x4 · 11-25-2005, 08:00 PM

I have (or had) a pair that I am not using. I will see if I can find them tomoorow.

Ron · 11-25-2005, 08:51 PM

Quote:

Originally Posted by 71swb4x4

I have (or had) a pair that I am not using. I will see if I can find them tomoorow.

Thanks, I would be very interested. I can't tell by the picture if they fit the D holes or not. I need them to finish up an expensive resto and the little details are important to me.

MAR-Ktech · 11-26-2005, 09:58 PM

Ron: Sorry to be a little slow to respond. Busy doing holiday things. Yes they fit the D hole. You should have a D shaped hole and two small holes beside the D and positioned forward from the D, and spaced a couple inches apart. Those are for the screws that hold the tag light. The tag light has a light socket that extends into the D opening and there is a locating pin molded to the back side of the tag light bezel that fits into either the upper or lower corner of the D opening. You might have to trim a little from the opening that has been cut into the rear sill to get the light sockets to fit. I don't have those drawings here with me. The D opening is completely covered by the tag lights.

These are nice tag lights, and come complete with the light socket, bulbs, and mounting screws. Most people didn't want to pay the extra or wanted to use their own lights or a lighted tag frame so we phased out that system. Its still available for customers that want it.

I will ask our webmaster to look at that link. It definitely does not work on my system but does on others.

Ron · 11-27-2005, 11:41 PM

Thanks, I'll order tomorrow.

11-24-2005, 12:20 PM	#1
Ron Registered User Join Date: Feb 2000 Location: Zillah Wa. USA Posts: 394	Roll pan, license lights, 67 LWB I installed a roll pan years ago and can't remember what brand it is, I THINK it's a Sir Michaels but I'm not sure. I need the two license plate lights for it, the holes in the roll pan are "D" shaped, do any of you know where I can get these? Thanks Ron __________________ '69 SWB '76 International "Terra" "Hooked on holiday beer"

11-24-2005, 12:57 PM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,131	Re: Roll pan, license lights, 67 LWB Most any of your parts stores that have replacement lamps like tail, turn, backup, etc, should have what you need or one that sells bumpers should have them also. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-24-2005, 02:36 PM	#4
MAR-Ktech Truck Parts Mfg. Join Date: Jul 2005 Location: Oklahoma City, OK Posts: 697	Re: Roll pan, license lights, 67 LWB Ron, that is an older Mar-K pan. The tag lites are still in stock, part number 100865. Try this link to the catalog pdf http://www.mar-k.com/rear_pans.pdf . I sometimes have trouble with the link but hopefully it will work. If not just check the partnumber on our online catalog. Mar-Ktech __________________ GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks

11-25-2005, 07:18 PM	#6
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Roll pan, license lights, 67 LWB link works, this is what he was mentioning. Attached Images

11-25-2005, 08:00 PM	#7
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Roll pan, license lights, 67 LWB I have (or had) a pair that I am not using. I will see if I can find them tomoorow. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

11-26-2005, 09:58 PM	#9
MAR-Ktech Truck Parts Mfg. Join Date: Jul 2005 Location: Oklahoma City, OK Posts: 697	Re: Roll pan, license lights, 67 LWB Ron: Sorry to be a little slow to respond. Busy doing holiday things. Yes they fit the D hole. You should have a D shaped hole and two small holes beside the D and positioned forward from the D, and spaced a couple inches apart. Those are for the screws that hold the tag light. The tag light has a light socket that extends into the D opening and there is a locating pin molded to the back side of the tag light bezel that fits into either the upper or lower corner of the D opening. You might have to trim a little from the opening that has been cut into the rear sill to get the light sockets to fit. I don't have those drawings here with me. The D opening is completely covered by the tag lights. These are nice tag lights, and come complete with the light socket, bulbs, and mounting screws. Most people didn't want to pay the extra or wanted to use their own lights or a lighted tag frame so we phased out that system. Its still available for customers that want it. I will ask our webmaster to look at that link. It definitely does not work on my system but does on others. __________________ GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks

11-27-2005, 11:41 PM	#10
Ron Registered User Join Date: Feb 2000 Location: Zillah Wa. USA Posts: 394	Re: Roll pan, license lights, 67 LWB Thanks, I'll order tomorrow. __________________ '69 SWB '76 International "Terra" "Hooked on holiday beer"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.