getting layed out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dropyrs · 11-19-2005, 06:04 PM

im looking for more info on Z-ing the frame on my '72.
ive read and searched around and learned a few things, but how is a crossmember drop, and does it go along with the Z?

phantom dually · 11-19-2005, 06:29 PM

Crossmember or Z. You would not do both.

dropyrs · 11-19-2005, 06:52 PM

I understand the z, but what is involved in the crossmember drop?

chevy_fatman · 11-19-2005, 07:41 PM

crossmember drop

As I said in my pm, good readin, lots of it and a lot of info there as well.

lvscott · 11-20-2005, 01:50 PM

i am wondering about zing the frame too. is there a tread that has some step by step instructions about how this is done?

also, does zing still require steering mods?

thanks,
brandon

1sick7 · 11-21-2005, 02:08 AM

you have to use some 3 Steering U-Joints and a support bears its going to look like this i have that whole thing for sale it came off of my truck e-mail at dragginbody67@yahoo.com

camaro__thunder · 11-28-2005, 02:09 AM

1sick7 sent a PM and email

11-19-2005, 06:04 PM	#1
dropyrs Registered User Join Date: Nov 2005 Location: magazine, AR Posts: 6	getting layed out im looking for more info on Z-ing the frame on my '72. ive read and searched around and learned a few things, but how is a crossmember drop, and does it go along with the Z? __________________ If it ain't broke, fix it till it is!

11-19-2005, 06:29 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,792	Re: getting layed out Crossmember or Z. You would not do both. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

11-19-2005, 06:52 PM	#3
dropyrs Registered User Join Date: Nov 2005 Location: magazine, AR Posts: 6	Re: getting layed out I understand the z, but what is involved in the crossmember drop? __________________ If it ain't broke, fix it till it is!

11-19-2005, 07:41 PM	#4
chevy_fatman Where's my beer? Join Date: Aug 2002 Location: I live in the state of denial.... Posts: 5,620	Re: getting layed out crossmember drop As I said in my pm, good readin, lots of it and a lot of info there as well.

11-20-2005, 01:50 PM	#5
lvscott Registered User Join Date: Mar 2005 Location: Las Vegas, NV Posts: 84	Re: getting layed out i am wondering about zing the frame too. is there a tread that has some step by step instructions about how this is done? also, does zing still require steering mods? thanks, brandon Last edited by lvscott; 11-21-2005 at 05:32 AM.

11-21-2005, 02:08 AM	#6
1sick7 Registered User Join Date: Dec 2004 Location: elkton Posts: 12	Re: getting layed out you have to use some 3 Steering U-Joints and a support bears its going to look like this i have that whole thing for sale it came off of my truck e-mail at dragginbody67@yahoo.com

11-28-2005, 02:09 AM	#7
camaro__thunder Epoxy Primer Friendly Join Date: Feb 2004 Location: South of Houston TEXXXAS Posts: 680	Re: getting layed out 1sick7 sent a PM and email __________________ My Project 69 SWB SHAVED BAGGED DOORED



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.