where did yall get your parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84 400 · 11-29-2005, 12:27 AM

Okay as a nother member suggested i am posting this to find out were to get some parts that yall have ordered. I am looking for good values and quality. I need all the window seals including the vent windows and both front inner fenders for my 84 c10. I may also be looking for a used front bumper becasue mine is pitted bad.

Thanks ALOT for the input guys and good luck with ur projects

**N2TRUX** · 11-29-2005, 12:39 AM

I bought my last set of window rubber from a GM dealership. Since I was able to get a decent discount I felt it was the best choice rather than risking the quality of aftermarket rubber.

It's hard to beat the quality of GM sheet metal. In my opinion your best bet is to find rust free GM fenders....

84 400 · 11-29-2005, 01:08 AM

thanks for the quick reply may be my uncal can get me a discount cause he works on the line at the hd plant in mich. Thanks for the reply

BIGCHEVYMAN · 11-29-2005, 06:42 PM

i agree with n2trucks. i bought my last set at the dealer. i get my stuff at wholesale anyway. you the gm stuff is going to fit and last a long time.

Tx Firefighter · 11-30-2005, 08:03 AM

I too buy all my stuff at the dealership.

BTW, you can get brand new completely assembled wing windows through GM. New glass, new rubber, new everything, just bolt them in. They cost a little more than rebuilding an old set, but no wind whistle at all.

*DroppedZ84* · 11-30-2005, 03:08 PM

Quote:

Originally Posted by Tx Firefighter

BTW, you can get brand new completely assembled wing windows through GM. New glass, new rubber, new everything, just bolt them in. They cost a little more than rebuilding an old set, but no wind whistle at all.

Care to share the part # and price? Are they for the entire 73-87 line, or just 81-87?

75stepside · 11-30-2005, 04:19 PM

i hate to be the black sheep, but i too try to get good quality parts at the best price - who doesn't! i'm sure that there's a good case for argument that you can't get an aftermarket part that's "good quality" ! regardless, i got all of my rubber from ChevyDuty and LMC truck... decent prices, good stuff. I rebuilt my wing windows and am very pleased with the results. I've put roughtly 200-300 miles on my project since completion and have had no problems with wind noise

good luck

84 400 · 11-30-2005, 06:27 PM

Quote:

Originally Posted by 75stepside

i hate to be the black sheep, but i too try to get good quality parts at the best price - who doesn't! i'm sure that there's a good case for argument that you can't get an aftermarket part that's "good quality" ! regardless, i got all of my rubber from ChevyDuty and LMC truck... decent prices, good stuff. I rebuilt my wing windows and am very pleased with the results. I've put roughtly 200-300 miles on my project since completion and have had no problems with wind noise

good luck

Thanks for the info. did u have to redo the rivets on the vent windows???
Thanks

75stepside · 11-30-2005, 06:31 PM

what i did, i removed the rivets that are on the hinge on the upper side. once the new gasket was in, i used 7mm bolts to put it back together. once in the truck, you cant see the bolts. I am told tha you can get the rivets just as GM used... someone on here posted links for them before...

11-29-2005, 12:27 AM	#1
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,741	where did yall get your parts Okay as a nother member suggested i am posting this to find out were to get some parts that yall have ordered. I am looking for good values and quality. I need all the window seals including the vent windows and both front inner fenders for my 84 c10. I may also be looking for a used front bumper becasue mine is pitted bad. Thanks ALOT for the input guys and good luck with ur projects __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

11-29-2005, 12:39 AM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: where did yall get your parts I bought my last set of window rubber from a GM dealership. Since I was able to get a decent discount I felt it was the best choice rather than risking the quality of aftermarket rubber. It's hard to beat the quality of GM sheet metal. In my opinion your best bet is to find rust free GM fenders.... __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-29-2005, 01:08 AM	#3
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,741	Re: where did yall get your parts thanks for the quick reply may be my uncal can get me a discount cause he works on the line at the hd plant in mich. Thanks for the reply __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

11-29-2005, 06:42 PM	#4
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	Re: where did yall get your parts i agree with n2trucks. i bought my last set at the dealer. i get my stuff at wholesale anyway. you the gm stuff is going to fit and last a long time.

11-30-2005, 08:03 AM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: where did yall get your parts I too buy all my stuff at the dealership. BTW, you can get brand new completely assembled wing windows through GM. New glass, new rubber, new everything, just bolt them in. They cost a little more than rebuilding an old set, but no wind whistle at all. __________________ I'm on the Instagram- @Gearhead_Kevin

11-30-2005, 04:19 PM	#7
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	Re: where did yall get your parts i hate to be the black sheep, but i too try to get good quality parts at the best price - who doesn't! i'm sure that there's a good case for argument that you can't get an aftermarket part that's "good quality" ! regardless, i got all of my rubber from ChevyDuty and LMC truck... decent prices, good stuff. I rebuilt my wing windows and am very pleased with the results. I've put roughtly 200-300 miles on my project since completion and have had no problems with wind noise good luck

11-30-2005, 06:31 PM	#9
75stepside Proud Member Join Date: Nov 2002 Location: Pittsburgh, PA Posts: 741	Re: where did yall get your parts what i did, i removed the rivets that are on the hinge on the upper side. once the new gasket was in, i used 7mm bolts to put it back together. once in the truck, you cant see the bolts. I am told tha you can get the rivets just as GM used... someone on here posted links for them before...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.