fiberglass front rollpan - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 11-30-2005, 12:55 AM

I have one that's not perfect but very usable 75.00 shipped in the 48!

djracer · 11-30-2005, 09:45 AM

here ya go

paintpyro · 11-30-2005, 11:52 AM

Will it fit 69-72 as well? I'm not sure if there is a difference at the fender cup.

djracer · 11-30-2005, 12:03 PM

they are the same!

paintpyro · 11-30-2005, 12:20 PM

Any damage, cracks, etc?
And do you take Paypal?

djracer · 11-30-2005, 03:16 PM

It has one little spot it on the very bottom! I'll post a couple of pics! I do take paypal!

paintpyro · 11-30-2005, 03:34 PM

sent you PM

djracer · 11-30-2005, 04:47 PM

sold!!!!!!!!!!!!!!!!!!!!!!!!!!!1

70short/step · 11-30-2005, 09:48 PM

I know it is sold, but how did it mount? also do you have to cut the frame horns?
Thanks!

djracer · 11-30-2005, 10:32 PM

I'm not real sure how it mounts but you do have to cut the frame horns it was off the truck when I got it!

11-30-2005, 12:55 AM	#1
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	fiberglass front rollpan I have one that's not perfect but very usable 75.00 shipped in the 48! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-30-2005, 09:45 AM	#2
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: fiberglass front rollpan here ya go Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-30-2005, 11:52 AM	#3
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	Re: fiberglass front rollpan Will it fit 69-72 as well? I'm not sure if there is a difference at the fender cup. __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster

11-30-2005, 12:03 PM	#4
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: fiberglass front rollpan they are the same! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-30-2005, 12:20 PM	#5
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	Re: fiberglass front rollpan Any damage, cracks, etc? And do you take Paypal? __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster Last edited by paintpyro; 11-30-2005 at 12:49 PM.

11-30-2005, 03:16 PM	#6
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: fiberglass front rollpan It has one little spot it on the very bottom! I'll post a couple of pics! I do take paypal! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-30-2005, 03:34 PM	#7
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	Re: fiberglass front rollpan sent you PM __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster

11-30-2005, 04:47 PM	#8
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: fiberglass front rollpan sold!!!!!!!!!!!!!!!!!!!!!!!!!!!1 __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-30-2005, 09:48 PM	#9
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: fiberglass front rollpan I know it is sold, but how did it mount? also do you have to cut the frame horns? Thanks! __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

11-30-2005, 10:32 PM	#10
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: fiberglass front rollpan I'm not real sure how it mounts but you do have to cut the frame horns it was off the truck when I got it! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!



Register or Log In To remove these advertisements.