FS 68-72 LW bed & other stuff - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cadiac · 10-23-2005, 01:10 PM

Decided to use a later model bed, so I'm selling this one. Someones been working it, -it has small amounts of bondo at the stake holes ?? right side is straight -left side is dented behind where the bondo can be seen. It is not rotted but has heavy pitting in the floor at front. Floor has some dents -tubs have small dents/dings. (I'd intended to Por 15 -coat with Rhino liner type kit the floor) Rear panel has holes cut for bumper braces, -I have another bottom to cut patches out of. $200 --Have a gold LW tail gate thats real decent/no rot $150 --Another LW gate a little dented $40 --left LWB side -has pin holes in wheel arch and some damage/some rust where tub meets inside. $30 --67-68 hood with 4 small dings/dents $25 --67 left fender a little bondo and a pin hole in pocket $25 --pair driver trailing arms from 3/4 $40 --1 in cab tank $25 Email for other pics, Thanks -Steve

Jakes-66-K10 · 10-23-2005, 02:24 PM

Do you have pics of the tailgate? I may be interested if it has the woodgrain trim.

cadiac · 10-23-2005, 03:41 PM

The gold/nice gate is from a 68,- I should have described it better. It didn't have the woodgrain. The other gate did have it/Bad shape. Trim's all off of both. Will get pics shortly of both gates if you still want to look.

chevykevy · 10-30-2005, 12:25 PM

Do you a set of spark plug heat shields for the rams horn manifolds. I need the wire loomd for the rear of the engine and under the manifolds too. Thanks.

cadiac · 10-30-2005, 02:54 PM

No I don't, sorry.

cadiac · 11-22-2005, 12:26 AM

bump

Green Machine · 11-23-2005, 01:49 PM

Put me first in line for the good tailgate -Tom

cadiac · 11-23-2005, 01:58 PM

Ok it's yours then. Sending a PM -Steve

cadiac · 11-26-2005, 01:16 PM

Bump-_-_-_ I have pics of everything -can send. Send your email in a PM -Steve

cadiac · 12-02-2005, 03:32 AM

bump

Green Machine · 12-03-2005, 12:07 AM

PM and Email sent -

Tom

10-23-2005, 01:10 PM	#1
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	FS 68-72 LW bed & other stuff Decided to use a later model bed, so I'm selling this one. Someones been working it, -it has small amounts of bondo at the stake holes ?? right side is straight -left side is dented behind where the bondo can be seen. It is not rotted but has heavy pitting in the floor at front. Floor has some dents -tubs have small dents/dings. (I'd intended to Por 15 -coat with Rhino liner type kit the floor) Rear panel has holes cut for bumper braces, -I have another bottom to cut patches out of. $200 --Have a gold LW tail gate thats real decent/no rot $150 --Another LW gate a little dented $40 --left LWB side -has pin holes in wheel arch and some damage/some rust where tub meets inside. $30 --67-68 hood with 4 small dings/dents $25 --67 left fender a little bondo and a pin hole in pocket $25 --pair driver trailing arms from 3/4 $40 --1 in cab tank $25 Email for other pics, Thanks -Steve Attached Images Last edited by cadiac; 11-26-2005 at 01:18 PM.

10-23-2005, 02:24 PM	#2
Jakes-66-K10 Registered User Join Date: Aug 2004 Location: Idaho Posts: 640	Re: FS 68-72 LW bed & other stuff Do you have pics of the tailgate? I may be interested if it has the woodgrain trim.

10-23-2005, 03:41 PM	#3
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff The gold/nice gate is from a 68,- I should have described it better. It didn't have the woodgrain. The other gate did have it/Bad shape. Trim's all off of both. Will get pics shortly of both gates if you still want to look.

10-30-2005, 12:25 PM	#4
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	Re: FS 68-72 LW bed & other stuff Do you a set of spark plug heat shields for the rams horn manifolds. I need the wire loomd for the rear of the engine and under the manifolds too. Thanks.

10-30-2005, 02:54 PM	#5
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff No I don't, sorry.

11-22-2005, 12:26 AM	#6
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff bump

11-23-2005, 01:49 PM	#7
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: FS 68-72 LW bed & other stuff Put me first in line for the good tailgate -Tom __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

11-23-2005, 01:58 PM	#8
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff Ok it's yours then. Sending a PM -Steve

11-26-2005, 01:16 PM	#9
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff Bump-_-_-_ I have pics of everything -can send. Send your email in a PM -Steve

12-02-2005, 03:32 AM	#10
cadiac Registered User Join Date: Jan 2004 Location: Wichita, Kansas 67212 Posts: 257	Re: FS 68-72 LW bed & other stuff bump

12-03-2005, 12:07 AM	#11
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: FS 68-72 LW bed & other stuff PM and Email sent - Tom __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.