Painless wireing questions.... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FRENCHBLUE72 · 12-13-2005, 09:31 PM

I have installed a 18 curcuit 67-72 p/n#10206 painless harness in my blazer and have a few questions for those who have installed these kits..

Where did you hook up the gear indicator light and the heater controll light??

All the acc port on the fuse box are hot all the time is that correct or do I have something hooked up wrong???

Any help would be great...

68 short step · 12-13-2005, 09:48 PM

not much help here, but how does it pass through the firewall? is it a bulkhead connection or just wires going through a grommet? and bout how much did that cost?

FRENCHBLUE72 · 12-13-2005, 10:00 PM

The wires pass through a bulk head but it is larger than the stock one so cutting is required and the stock taillight harness hole is not used so you have to fill it in with a rubber groument.. Cannot remember price right off the top of my head got it at summit racing though..

BubbaGreen · 12-13-2005, 11:08 PM

tie into the dash lights....that way they will only be on when the lights are on.

raidermanny · 12-13-2005, 11:32 PM

Thats how I wired mine too.

jhow66 · 12-14-2005, 01:40 AM

Only things that should be hot with switch off are -brake lights-headlight switch- hazzard lights-dome circuit. Check large pink wire to ing. switch (this wire feeds fuse panel). It should not be hot at ing. switch with switch off. Back side of switch will have Acc. post on it.

12-13-2005, 09:48 PM	#2
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Painless wireing questions.... not much help here, but how does it pass through the firewall? is it a bulkhead connection or just wires going through a grommet? and bout how much did that cost?

12-13-2005, 10:00 PM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Painless wireing questions.... The wires pass through a bulk head but it is larger than the stock one so cutting is required and the stock taillight harness hole is not used so you have to fill it in with a rubber groument.. Cannot remember price right off the top of my head got it at summit racing though.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-13-2005, 11:08 PM	#4
BubbaGreen Senior Member Join Date: Mar 2001 Location: Cedar Park, TX Posts: 686	Re: Painless wireing questions.... tie into the dash lights....that way they will only be on when the lights are on. __________________ 71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich

12-13-2005, 11:32 PM	#5
raidermanny Senior Member Join Date: Dec 2004 Location: Fremont, Ca Posts: 260	Re: Painless wireing questions.... Thats how I wired mine too.

12-14-2005, 01:40 AM	#6
jhow66 Registered User Join Date: Jun 2002 Location: Knoxville Tenn. Posts: 3,058	Re: Painless wireing questions.... Only things that should be hot with switch off are -brake lights-headlight switch- hazzard lights-dome circuit. Check large pink wire to ing. switch (this wire feeds fuse panel). It should not be hot at ing. switch with switch off. Back side of switch will have Acc. post on it. __________________ 56 Chevy Bel-Air 2dr. HT (purchased new) 71 Chevy Cheyenne SWB PU (502HO) 65 GMC short bed step--work in progress and my gofer

12-13-2005, 09:31 PM	#1
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Painless wireing questions.... I have installed a 18 curcuit 67-72 p/n#10206 painless harness in my blazer and have a few questions for those who have installed these kits.. Where did you hook up the gear indicator light and the heater controll light?? All the acc port on the fuse box are hot all the time is that correct or do I have something hooked up wrong??? Any help would be great... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.