Steering shaft removal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sixpac · 12-19-2005, 01:42 PM

I need to remove the steering shaft from my 1966 Chevy truck. Other than removal of connection at gear box and the steering wheel, is there anything else to keep it from coming out?
It is a three speed on the column.

**dennislbrooks** · 12-19-2005, 01:56 PM

The shifter linkage from the column arms and the electrical connection under the dash should be close to all. It is clamped on the engine side of the firewall plus all the firewall boot bolts. I will be doing the same thing in a couple of weeks for my tilt installation.

12-19-2005, 01:42 PM	#1
sixpac Registered User Join Date: Nov 2005 Location: Newburgh, IN Posts: 46	Steering shaft removal I need to remove the steering shaft from my 1966 Chevy truck. Other than removal of connection at gear box and the steering wheel, is there anything else to keep it from coming out? It is a three speed on the column.

12-19-2005, 01:56 PM	#2
dennislbrooks Senior Member Join Date: Feb 2004 Location: Williamsburg, Ohio Posts: 1,798	Re: Steering shaft removal The shifter linkage from the column arms and the electrical connection under the dash should be close to all. It is clamped on the engine side of the firewall plus all the firewall boot bolts. I will be doing the same thing in a couple of weeks for my tilt installation.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.