Rear Window Gasket Help Please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KTLX · 12-13-2005, 10:34 PM

All, I went to put a sliding window in my cab, large window, no trim, followed the direction, used plenty of dawn dish soap and could not get the window to go in. I wound up tearing the gasket to shreds on the inside. Any suggestions. Process I used, put the gasket on the sliding window. Put a small cord in the inside track, held the window up and pulled the cord from the inside. Zip, Zilch, Nada, a royal pain and very frustrating. Before I call the glass shop, is there a better way.

incoma · 12-13-2005, 11:02 PM

You're doing it the right way. Did you have someone pushing on the back side of the glass? I found that the pressure helped "pop" the glass in. Also, try one side at a time. Once you get one corner in, you can slide the window into that corner, and that gives you a bit more room to work with on the other side. I'll be reinstalling mine in a few weeks. A buddy got a bit overzealous when installing mine, and the string tore my rubber too, but not enough to cause a leak. I'm just an an@l guy you wants his truck to look right.

KTLX · 12-14-2005, 11:04 AM

Thanks for the assitance, I went an bought a new gasket, as I am the same way, I cant stand things that dont look right.

Tx Firefighter · 12-14-2005, 11:52 AM

Use Goop or GoJo hand soap and not the dishwashing detergent. It clings better and doesn't run off.

**truckdude239** · 12-14-2005, 11:57 AM

u need an helpper outside pushing on the window i did the string trick expect i used weedeating line it seem to work great

badpeanut · 12-15-2005, 01:18 AM

Does an old gasket work, or is a new gasket required for pliability?

KTLX · 12-21-2005, 01:35 PM

I would use a new gasket, I couldn't imagine using an old gasket with as much trouble as I had trying to get the gasket to fit on the inside of the cab.

**John Fabris** · 12-21-2005, 01:39 PM

What was tearing the gasket? It you kept pulling the string thru the gasket, go with a bigger string (small rope)...

KTLX · 12-21-2005, 08:37 PM

I used weedeater line, .085, and it sucked. My thought was it ripped the gasket because it was too tough/ridgid. Going to try again, I called a local glass guy Safelite and they will not install 3rd party glass (sliders). They say it breaks too easy. Oh well, back to the drawing board.

CG · 12-21-2005, 09:33 PM

use clothesline cord. can get it anywhere. its soft and not too big around.

12-13-2005, 10:34 PM	#1
KTLX Registered User Join Date: May 2000 Location: Fort Mill, SC Posts: 71	Rear Window Gasket Help Please All, I went to put a sliding window in my cab, large window, no trim, followed the direction, used plenty of dawn dish soap and could not get the window to go in. I wound up tearing the gasket to shreds on the inside. Any suggestions. Process I used, put the gasket on the sliding window. Put a small cord in the inside track, held the window up and pulled the cord from the inside. Zip, Zilch, Nada, a royal pain and very frustrating. Before I call the glass shop, is there a better way. __________________ Kenny

12-13-2005, 11:02 PM	#2
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: Rear Window Gasket Help Please You're doing it the right way. Did you have someone pushing on the back side of the glass? I found that the pressure helped "pop" the glass in. Also, try one side at a time. Once you get one corner in, you can slide the window into that corner, and that gives you a bit more room to work with on the other side. I'll be reinstalling mine in a few weeks. A buddy got a bit overzealous when installing mine, and the string tore my rubber too, but not enough to cause a leak. I'm just an an@l guy you wants his truck to look right.

12-14-2005, 11:04 AM	#3
KTLX Registered User Join Date: May 2000 Location: Fort Mill, SC Posts: 71	Re: Rear Window Gasket Help Please Thanks for the assitance, I went an bought a new gasket, as I am the same way, I cant stand things that dont look right. __________________ Kenny

12-14-2005, 11:52 AM	#4
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: Rear Window Gasket Help Please Use Goop or GoJo hand soap and not the dishwashing detergent. It clings better and doesn't run off. __________________ I'm on the Instagram- @Gearhead_Kevin

12-14-2005, 11:57 AM	#5
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,237	Re: Rear Window Gasket Help Please u need an helpper outside pushing on the window i did the string trick expect i used weedeating line it seem to work great __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-15-2005, 01:18 AM	#6
badpeanut Not a bad nut after all.. Join Date: Dec 2000 Location: ND Posts: 1,759	Re: Rear Window Gasket Help Please Does an old gasket work, or is a new gasket required for pliability? __________________ '05 Chevy 2500HD 4x4 '72 GMC LWB 4x2 driver '72 Chevy LWB 4x4 plow truck '71 Blazer 4x4 driver '70 GMC LWB trailer

12-21-2005, 01:35 PM	#7
KTLX Registered User Join Date: May 2000 Location: Fort Mill, SC Posts: 71	Re: Rear Window Gasket Help Please I would use a new gasket, I couldn't imagine using an old gasket with as much trouble as I had trying to get the gasket to fit on the inside of the cab. __________________ Kenny

12-21-2005, 01:39 PM	#8
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: Rear Window Gasket Help Please What was tearing the gasket? It you kept pulling the string thru the gasket, go with a bigger string (small rope)... __________________ John Fabris 67 C10 SWB

12-21-2005, 08:37 PM	#9
KTLX Registered User Join Date: May 2000 Location: Fort Mill, SC Posts: 71	Re: Rear Window Gasket Help Please I used weedeater line, .085, and it sucked. My thought was it ripped the gasket because it was too tough/ridgid. Going to try again, I called a local glass guy Safelite and they will not install 3rd party glass (sliders). They say it breaks too easy. Oh well, back to the drawing board. __________________ Kenny

12-21-2005, 09:33 PM	#10
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 20,019	Re: Rear Window Gasket Help Please use clothesline cord. can get it anywhere. its soft and not too big around.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.