|
|
|
12-22-2005, 11:07 AM
|
#1 |
|
Account Suspended
 
Join Date: Jun 2003
Location: PA
Posts: 1,411
|
Re: Speedo gear box
There's one on my NP205 also. Right now the speedo cable is too short to connect to it, but soon I should have the proper length cable and hook it back up. I think its a good thing to have because as you change tire size or gear ratios in the diffs., you can adjust for those changes with that little box. All you have to do is take the tire size info and diff. ratio info and that box to any qualified speedo repair shop and they can change out the internal little gears to make your speedo dead on.
It's a good item to hang onto. 72longbed Last edited by 72longbed; 12-22-2005 at 01:48 PM. |
|
|
|
12-22-2005, 01:05 PM
|
#2 |
|
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
Re: Speedo gear box
Please re-read the post. There is no gear change at all in this thing. What goes in comes out the same speed. The things are riveted shut and you have to grind the rivets off to get in.............not too easy of access.
|
|
|
|
|
12-22-2005, 01:47 PM
|
#3 |
|
Account Suspended
Join Date: Jun 2003
Location: PA
Posts: 1,411
|
Re: Speedo gear box
It's a Ratio Adapter Box, guaranteed. If a change is needed, the "rivits" will be ground off and different gearing can be installed. You should look closely at the cases, I doubt if they are really rivits, all of these that I have seen are screwed together with either Phillips head or slotted screws.
Either way its a Ratio Adapter Box. Now quit complaining and check how much your speedo is off, fast or slow, take the box and your driveline info to a speedo shop, and see if I'm right.  Just bustin' on ya, 72longbed |
|
|
|
|
12-22-2005, 03:02 PM
|
#4 |
|
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
Re: Speedo gear box
I don't seem to remember complaining. And they ARE rivets!
 Bet you're right though. I just happen to have 1:1 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
