|
12-24-2005, 12:10 PM
|
#1 |
|
SWB 4X4 CLUB
Join Date: Feb 2005
Location: PA
Posts: 1,088
|
Shackle question
I am in need of the shackle assembly for the rear of the front leaf spring on a 68 chevy 4X4. I have enclesed a picture of what I need, It says that these fit 67-72. I was under the impression that the width of the 67-68 leaf springs were different that the 69-72. Also would I be able to get these in a local parts store.
Almost forgot but here is the pic.(I need Everything in the box marked 9) |
|
|
|
12-24-2005, 07:01 PM
|
#2 |
|
Junk/Daily Driver Club
 
Join Date: Feb 2004
Location: Manheim, PA 17545
Posts: 253
|
Re: Shackle question
Check with Offroad Design.
Later Willis
__________________
Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker.  There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened! |
|
|
|
|
12-24-2005, 09:47 PM
|
#3 |
|
Registered User
Join Date: Dec 1999
Location: Northwest NJ
Posts: 746
|
Re: Shackle question
I got mine at a local spring shop. The front springs are the same 67-72 but the rears are different length but the width is the same on the K10. Chris
|
|
|
|
|
12-25-2005, 07:50 PM
|
#4 |
|
Senior Member
Join Date: Jul 2004
Location: Clarks Hill, Indiana
Posts: 733
|
Re: Shackle question
When i brought home my 69, i discovered that 1 of my front shackles was cracked all the way thru. i had a local shop cut me a replacemtent out of 3/8" steel. That worked great! i have since replaced with the ORD greasable shackle kit that is a little longer than stock... but the bushing should be available at any parts store, and just put in some grade 8 bolts...
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
