|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-26-2005, 09:37 PM
|
#1 |
|
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
What size bolts in a SWB bed?
Alright guys this maybe a bit of laziness on my part, but I want to make sure I get the right bolts for my bed rather than making 2 or more trips to the hardware store and having to return bolts for the correct sizes. So my question is what is the optimum size bolts for a SWB bed and how many will I need. It appears like I'll need mostly 5/16" bolts x 3/4" long?
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
|
|
|
12-26-2005, 09:41 PM
|
#2 |
|
Watch out for your cornhole !
 
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
Re: What size bolts in a SWB bed?
The carriage bolts around the edge of the floor?
I used 5/16 x 3/4 inch long and that allowed me enough length to use a flat washer and a lock washer on each under the nut.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
12-26-2005, 09:45 PM
|
#3 |
|
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: What size bolts in a SWB bed?
YES! I thought so! Thanks Firefighter, that's mainly what I'm looking for!
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
