86 Camaro rear calipers with mounting brackets and ebrake cables. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 12-20-2005, 01:09 AM

Just got the set up I really, really wanted.

These can go. Use them with a 95 Caprice rear rotor and you're good to go.

Could fit other rear axles with a different mounting bracket (weld on, etc).

I'll sell them for what I paid for them:

75.00 plus the ride. This includes all the ebrake hardware.

Funny thing, I seem to be going through a ton of rear ebrake calipers... Bolt holes are 3" apart, fit on most 10B's.

red71cheyenne · 12-20-2005, 03:24 PM

I'm sorry, you are saying these will bolt on to a truck of our year? Just use a 95 Caprice rotor? Thanks and sorry for the confusion, Jeff.

*FormerMember* · 12-20-2005, 03:30 PM

That is what I was going to do with them, yes.

There are several 10B bolt patterns.

red71cheyenne · 12-20-2005, 03:46 PM

Cool! I had no idea something off a newer car would fit including the backing plate. I thought thats why everyone sold custom made ones. Thanks, Jeff.

*FormerMember* · 12-20-2005, 03:51 PM

Quote:

Originally Posted by red71cheyenne

Cool! I had no idea something off a newer car would fit including the backing plate. I thought thats why everyone sold custom made ones. Thanks, Jeff.

Well, it's a 10B, there are a few mounting hole differences between the years, but nothing a drill couldn't fix! To run these on mine, I would probably use a different caliper mount, as I have "the big hole 10B (4" apart for the mounting bolts)". Calipers are still worth the fundage though, as all the ebrake stuff is there and works well.

Sad, isn't it? These would work fine, with little work but be uglier.

*FormerMember* · 12-21-2005, 03:08 AM

Quote:

Originally Posted by rick980

What are the measurements center to center on the bolts of the backing plates?

3" (as listed above in the first post)

Of course, if you happen to have the 4" 10B re-drilling isn't an issue. There's plenty of meat.

The rotors are 18.99 at Autozone.

Heck, aftermarket caliper brackets for these calipers are 12.99 each!

http://www.loufegersracing.com/49.html

70short/step · 12-21-2005, 08:37 PM

So what setup did you get that you really wanted?? I am thinking disc brakes in the back but dont know what direction I am going yet.

*FormerMember* · 12-21-2005, 08:51 PM

Quote:

Originally Posted by 70short/step

So what setup did you get that you really wanted?? I am thinking disc brakes in the back but dont know what direction I am going yet.

Brembo with slotted and drilled rotors.

skeeter288 · 12-21-2005, 11:19 PM

why cant rear caprice setups work? why would you need camaro plates & calipers and caprice rotors? i thought rotors off caprice were 4.5 in bolt pattern where the truck was 5 inch.

*FormerMember* · 12-21-2005, 11:25 PM

Quote:

Originally Posted by skeeter288

why cant rear caprice setups work? why would you need camaro plates & calipers and caprice rotors? i thought rotors off caprice were 4.5 in bolt pattern where the truck was 5 inch.

No one said they wouldn't work.

In fact, some here are running the 94-96 Caprice/Impala rear disk which is 5 on 5". Ebrake's built into the backing plate, from what I've been told. May need to build an adapter to bolt the backing plate on.

Why is this turning into a tech article???

skeeter288 · 12-21-2005, 11:39 PM

sorry. i didnt want to upset anyone. i just dont want 2 different bolt pattern wheels. thanks.

*FormerMember* · 12-22-2005, 09:06 AM

Quote:

Originally Posted by skeeter288

sorry. i didnt want to upset anyone. i just dont want 2 different bolt pattern wheels. thanks.

Not upset. Just trying to keep it in-line with the board it's posted on.

*FormerMember* · 12-24-2005, 11:19 AM

Ttt

*FormerMember* · 12-27-2005, 11:49 AM

tripped over these yesterday... please make them go away!

12-20-2005, 01:09 AM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	86 Camaro rear calipers with mounting brackets and ebrake cables. Just got the set up I really, really wanted. These can go. Use them with a 95 Caprice rear rotor and you're good to go. Could fit other rear axles with a different mounting bracket (weld on, etc). I'll sell them for what I paid for them: 75.00 plus the ride. This includes all the ebrake hardware. Funny thing, I seem to be going through a ton of rear ebrake calipers... Bolt holes are 3" apart, fit on most 10B's. Last edited by FormerMember; 10-04-2007 at 06:34 PM.

12-20-2005, 03:24 PM	#2
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: 86 Camaro rear calipers with mounting brackets and ebrake cables. I'm sorry, you are saying these will bolt on to a truck of our year? Just use a 95 Caprice rotor? Thanks and sorry for the confusion, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

12-20-2005, 03:30 PM	#3
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 86 Camaro rear calipers with mounting brackets and ebrake cables. That is what I was going to do with them, yes. There are several 10B bolt patterns.

12-20-2005, 03:46 PM	#4
red71cheyenne Back in the sticks Join Date: Jan 2001 Location: Fordland, MO Posts: 3,188	Re: 86 Camaro rear calipers with mounting brackets and ebrake cables. Cool! I had no idea something off a newer car would fit including the backing plate. I thought thats why everyone sold custom made ones. Thanks, Jeff. __________________ 1971 Cheyenne C-10 w/700R4 and Tuned Port Injection 1969 K5 Blazer w/Tuned Port 2010 2SS/RS Flaming Orange Camaro 2011 K1500 Suburban 2014 K1500 Pickup 2008 Nissan Altima? The wifes' hoopty

12-21-2005, 08:37 PM	#7
70short/step Registered User Join Date: Dec 2003 Location: Stockton, CA Posts: 1,579	Re: 86 Camaro rear calipers with mounting brackets and ebrake cables. So what setup did you get that you really wanted?? I am thinking disc brakes in the back but dont know what direction I am going yet. __________________ For every person with a spark of genius, There are a hundred with ignition trouble. 70 Short/Step

12-21-2005, 11:19 PM	#9
skeeter288 Registered User Join Date: Dec 2005 Location: baltimore, maryland Posts: 14	Re: 86 Camaro rear calipers with mounting brackets and ebrake cables. why cant rear caprice setups work? why would you need camaro plates & calipers and caprice rotors? i thought rotors off caprice were 4.5 in bolt pattern where the truck was 5 inch.

12-21-2005, 11:39 PM	#11
skeeter288 Registered User Join Date: Dec 2005 Location: baltimore, maryland Posts: 14	Re: 86 Camaro rear calipers with mounting brackets and ebrake cables. sorry. i didnt want to upset anyone. i just dont want 2 different bolt pattern wheels. thanks.

12-24-2005, 11:19 AM	#13
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 86 Camaro rear calipers with mounting brackets and ebrake cables. Ttt

12-27-2005, 11:49 AM	#14
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: 86 Camaro rear calipers with mounting brackets and ebrake cables. tripped over these yesterday... please make them go away!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.