What did you get done? Christmas edition - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged74 · 12-28-2005, 12:16 AM

Quote:

Originally Posted by n2billet

We (Stoked Out Specialties) are a dealer for Billet Specialties so that's the reason all my cars/trucks have them

The wheels that are going on the 68 are 20x8.5 with 5.75 BS for the front
and 20x10 with 4.75 BS for the rear. I'm getting Vintec's Deep Dish Soft Lips.

The motor got pulled out today so it could be detailed, I've got to stop before I tear it down to the frame!

Thats gonna look killer, those are the same wheels I am wanting to put on the blazer.

**N2TRUX** · 12-28-2005, 12:36 AM

Quote:

Originally Posted by bagged74

those are the same wheels I am wanting to put on the blazer.

Call Roger at Stoked Out Specialties 972-772-0146. He can get you a set when you are ready.

Quote:

Originally Posted by SCOTI

Step away from the truck.....

It's too late now. He's already gone off the dep end. We are better off encouraging him at this point so he gets it finished....

n2billet · 12-28-2005, 12:41 AM

Quote:

Originally Posted by N2TRUX

Call Roger at Stoked Out Specialties 972-772-0146. He can get you a set when you are ready.

It's too late now. He's already gone off the dep end. We are better off encouraging him at this point so he gets it finished....

I've got to get it done......I've got the 84swb to do next or was it the Rambler?

SCOTI · 12-28-2005, 01:17 AM

Quote:

Originally Posted by n2billet

I've got to get it done......I've got the 84swb to do next or was it the Rambler?

You see...that's why I like you so much. You make me look normal

.

DirtyLarry · 12-28-2005, 01:49 AM

A buddy and I spend Christmas afternoon ripping apart the 14 bolt FF and Dana 44 in my K10 in preparation for 4.56 gears, front Detroit Truetrac and rear Detroit locker. The front Truetrac spinning 36” Superswampers is surely to wipe out a U-joint, an axle or something on the next wheeling outing.

I spent 4 hours and 7 beers tonight doing "manly dishes" in the solvent tank to clean all of the goods before reassembly.

**N2TRUX** · 12-28-2005, 09:50 PM

Quote:

Originally Posted by n2billet

I've got to get it done......I've got the 84swb to do next or was it the Rambler?

84 is next, then the Rambler gets the full "Pro Touring" treatment....

I got fresh pics today. if keith doesn't get on here tonight I'll post em up for y'all.

12-28-2005, 01:49 AM	#5
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Re: What did you get done? Christmas edition A buddy and I spend Christmas afternoon ripping apart the 14 bolt FF and Dana 44 in my K10 in preparation for 4.56 gears, front Detroit Truetrac and rear Detroit locker. The front Truetrac spinning 36” Superswampers is surely to wipe out a U-joint, an axle or something on the next wheeling outing. I spent 4 hours and 7 beers tonight doing "manly dishes" in the solvent tank to clean all of the goods before reassembly. __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.