lokar floor mount pedal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

76bonanza · 12-27-2005, 04:12 PM

Anyone replace there floor mount pedal with one of the lokar floor mount pedals? If so how hard was it and how does it look?

Thanks

68Stepbed · 12-27-2005, 09:25 PM

I am thinking of doing this also to get rid of that ugly throttle rod. Stacey David put one in Copperhead if you wanna try to look it up.

ChevLoRay · 12-28-2005, 10:36 AM

Custom Classic Truck magazine did an installation a couple years back. The pedal ass'y comes with a template to show you where to cut the hole, and the article says to place it where it feels right to you. There's four holes to be drilled, and the area to cut out is within the area surrounded by the mounting holes. Part of the pedal ass'y goes into the hole and the cable attaches to it.

Summit Racing sells it for $99. You can buy it from Lokar for $141.99. You'll need the 36-inch universal throttle cable and a bracket/spring ass'y, too. Summit sells 'em both, and ships for free. I'm waiting to install mine that I got a couple of weeks ago.

76bonanza · 12-28-2005, 01:44 PM

Let me know how it goes when you install if you dont mind

fastwillie 696969 · 12-28-2005, 02:34 PM

im doing one as well in a week or two just got the assy

12-27-2005, 04:12 PM	#1
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	lokar floor mount pedal Anyone replace there floor mount pedal with one of the lokar floor mount pedals? If so how hard was it and how does it look? Thanks __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

12-27-2005, 09:25 PM	#2
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: lokar floor mount pedal I am thinking of doing this also to get rid of that ugly throttle rod. Stacey David put one in Copperhead if you wanna try to look it up. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

12-28-2005, 10:36 AM	#3
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: lokar floor mount pedal Custom Classic Truck magazine did an installation a couple years back. The pedal ass'y comes with a template to show you where to cut the hole, and the article says to place it where it feels right to you. There's four holes to be drilled, and the area to cut out is within the area surrounded by the mounting holes. Part of the pedal ass'y goes into the hole and the cable attaches to it. Summit Racing sells it for $99. You can buy it from Lokar for $141.99. You'll need the 36-inch universal throttle cable and a bracket/spring ass'y, too. Summit sells 'em both, and ships for free. I'm waiting to install mine that I got a couple of weeks ago. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

12-28-2005, 01:44 PM	#4
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: lokar floor mount pedal Let me know how it goes when you install if you dont mind __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

12-28-2005, 02:34 PM	#5
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: lokar floor mount pedal im doing one as well in a week or two just got the assy __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.