|
09-11-2002, 02:12 PM
|
#1 |
|
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
non-finned drums??
I know, they are to dissapat heat, thats not my concern right now, short of milling a set of truck drums are there are car drums taht are 5 on 5 and the same saide brakes that I can get?
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu  Marshalltown, Iowa |
|
|
|
09-11-2002, 05:13 PM
|
#2 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Large B body is 5 on 5..(caprice ans clones) as for width, I can't help you there.
|
|
|
|
|
09-11-2002, 05:25 PM
|
#3 |
|
Senior Member
 
Join Date: Dec 1999
Location: TN/VA
Posts: 6,388
|
I have a set off of a Caprice but have not checked to see if they will work yet.
|
|
|
|
|
09-11-2002, 10:16 PM
|
#4 |
|
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
well tim you wanna check them suckers out for size? or anyone else?
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa |
|
|
|
|
09-12-2002, 01:05 AM
|
#5 |
|
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
5 lug smooth drums ?
no car ones wil be smooth either all are finned 5 lug on al vehicles far as i have aver seen, you really want to keep those fins.... Last edited by Fast68Chevy; 09-12-2002 at 01:15 AM. |
|
|
|
|
09-12-2002, 02:21 PM
|
#6 |
|
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
Randy, the heat disapating part is not a concern for me, If I can't find drums that arent' finned hat fit I'll just have some machined, I just thought I'd save some work, its nto gonna be towing anythingitsjust a swb step
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa |
|
|
|
|
09-12-2002, 04:31 PM
|
#7 |
|
Senior Member
Join Date: Dec 1999
Location: TN/VA
Posts: 6,388
|
Hey chevy2racr, The ones I have do have little fins not big like the truck fins and they are 2 3/8 in deep.
|
|
|
|
|
09-12-2002, 10:59 PM
|
#8 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Grind them down...
Not like back brakes do much...otherwise, they wouldn't last 100,000 miles. |
|
|
|
|
09-12-2002, 11:01 PM
|
#9 |
|
Slowly getting CRSS...
Join Date: Jul 2001
Location: Lutz, Florida
Posts: 656
|
i was never able to find any drums like what you are talking about, they were never the right width. I needed them w/ out the fins to fit inside my rims. i ended up having to have them machined and that wasnt cheap.
__________________
-Nic Lutz, Fl My Team Website The Heavy Chevy Website ------------------
There is No replacement for Displacement... "If everything seems under control, you're just not going fast enough." - Mario Andretti |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
