Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-31-2005, 04:35 PM | #1 |
An American Soldier
Join Date: Feb 2005
Location: Grumolo D' Abadessee, Italy
Posts: 503
|
Leak around Speedo Cable Connection
I have transmiision fluid dripping from my speedo cable right where it connects to the transmission. It is a new cable. Is there an o-ring or something that I can replace where the speedo connection is on the transmission? There is a bolt and bracket holding iin a ratio gear (i assume), but the piece seems to move easily. Any ideas?
__________________
Dan dan.brue@us.army.mil |
12-31-2005, 04:44 PM | #2 |
Registered User
Join Date: Aug 2002
Location: Newport News, VA
Posts: 190
|
Re: Leak around Speedo Cable Connection
Experienced the very same problem and it was caused by the O-Ring that had become distorted. New O-Ring installed and the problem was solved. It may well be that the O-Ring on your drive assembly is missing or distorted. Hope this helps...
|
Bookmarks |
|
|