NEED HELP part # question c10 steering column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jetmech727 · 12-30-2005, 12:18 AM

I need a part # for a upper steering shaft bearing and a location that I could buy one. I checked with Napa, Advanced Auto and Chevy no one can pull up a part # or any info for that matter. the steering column is out of a 1970 c10 and the part needed is for the upper steering shaft bearing. The bearing is just below the plastic turn signal assembly. Thanks for any help on this one.

pebbleboy · 12-30-2005, 12:23 AM

DO you have the new LMC truck Catalogue CB -41?
On page 129 #22 Is that the part you need?

**FRENCHBLUE72** · 12-30-2005, 01:27 AM

I also was not able to get the bearings from a local auto parts stor but any of the vendors on here should be able to help you out..

Alan Potter · 01-02-2006, 07:56 AM

Got mine from www.truckandcarshop.com

70GMCer · 01-02-2006, 08:32 AM

Here's the GM part numbers for the upper & lower steering column bearings.

Upper #5679205
Lower #3981935 both of these are still available at the dealer....

These part numbers were given to me by my local Chevy dealer. The parts guy told me this is what I needed for the column. I haven't got them yet, as I haven't torn down my column for rebuild, so, I can't tell you if these are right or not. Just going by what Chevy told me......They can't be wrong, right?

steve

Longhorn Man · 01-02-2006, 11:57 AM

junk yard

12-30-2005, 12:18 AM	#1
Jetmech727 Registered User Join Date: Sep 2004 Location: Indianapolis,IN Posts: 148	NEED HELP part # question c10 steering column I need a part # for a upper steering shaft bearing and a location that I could buy one. I checked with Napa, Advanced Auto and Chevy no one can pull up a part # or any info for that matter. the steering column is out of a 1970 c10 and the part needed is for the upper steering shaft bearing. The bearing is just below the plastic turn signal assembly. Thanks for any help on this one. __________________ "When cows laugh, does milk come out of their nose?"

01-02-2006, 07:56 AM	#4
Alan Potter Registered User Join Date: Apr 2005 Location: Northwest Ohio Posts: 162	Re: NEED HELP part # question c10 steering column Got mine from www.truckandcarshop.com __________________ '12 Silverado Crew Cab 4x4 '05 Silverado SWB '67 Chevrolet CST 2wd '49 Willys Jeepster

01-02-2006, 11:57 AM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: NEED HELP part # question c10 steering column junk yard

12-30-2005, 01:27 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: NEED HELP part # question c10 steering column I also was not able to get the bearings from a local auto parts stor but any of the vendors on here should be able to help you out.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-02-2006, 08:32 AM	#5
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: NEED HELP part # question c10 steering column Here's the GM part numbers for the upper & lower steering column bearings. Upper #5679205 Lower #3981935 both of these are still available at the dealer.... These part numbers were given to me by my local Chevy dealer. The parts guy told me this is what I needed for the column. I haven't got them yet, as I haven't torn down my column for rebuild, so, I can't tell you if these are right or not. Just going by what Chevy told me......They can't be wrong, right? steve __________________ 1997 GMC Sierra Ext 1965 Mustang



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.