|
01-02-2006, 10:06 PM
|
#1 |
|
Senior Member
Join Date: May 2002
Location: NORTHEAST OHIO
Posts: 493
|
head problem
I bought these world product heads for my 350 about 5 years ago...they have been in the boxes in my garage since I bought them.I did open one box and look at the head when I first got them and they were nice.They are cast iron with manley s.s. valves,220c.c.runners,64 c.c. straight plugs.here's the problem,since my frame and suspension are done and my cab is 90% done,I figured I would get the heads out and clean them up to get ready for painting,as my block is painted and I want to put the motor together.well,I was looking at the intake ports and on one of the heads,there is a hole about one inch long and 3/16" wide,thru the port and into the pushrod hole!Do you think this can be repaired? I really don't want to ignore it.any advice would be appreciated.
|
|
|
|
01-02-2006, 10:41 PM
|
#2 |
|
User #12137
 
Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
Re: head problem
you may want to move this to the motor part of the board for a better responce
http://67-72chevytrucks.com/vboard/f...splay.php?f=24 |
|
|
|
|
01-03-2006, 12:05 AM
|
#3 |
|
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: head problem
Sounds like a casting flaw. I would try calling World Products and pleading my case. 631-981-1918.
__________________
Fred There is no such thing as too much cam...just not enough engine. 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
