|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-05-2006, 08:00 PM
|
#1 |
|
Registered User
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,052
|
700r to 350 tranny.. ?
Is it a basic slide the crossmember foreward and get a longer drive shaft or does it require a little more work with the placing of the crossmember ?
The tranny is from my 72C20 The truck is a 84 C20 it has a 700R that's slowly quitting on me and I have a great operating T350 on the shelf. I dont use 4th gear with the 700R anyways cause It does not have the right gears combined with nearly a 32" tall tire and a 3:45 grears.
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD Last edited by 72MARIO; 01-05-2006 at 08:01 PM. |
|
|
|
01-05-2006, 11:49 PM
|
#2 |
|
Registered User
Join Date: Feb 2003
Location: Bertrand, Nebraska
Posts: 355
|
Re: 700r to 350 tranny.. ?
If your 350 is a 9 inch tailshaft it is the exact length, then all you will need is to move the crossmember ahead by a couple inches is all.
__________________
98 Neon 97 Grand Prix GT 02 Grand Prix 40th Anniv. 86 GMC 5.0 77 Olds 98 6.6 REAL AMERICANS, DRIVE AMERICAN |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
