Goodmark dealers in Iowa?

[Novaguy73]

Anyone that carries the 67-72 sheetmetal? Ill be looking for floors, braces, rockers and cab corners here in a little while and more later on down the road. Id like to buy and help somone local if i could. Anyone? Let me know, thanks...

[Green Machine]

Try these guys and they are close too, don't know about "goodmark" but they carry tri-plus, my body man gets his stuff from there, they only had the slip on rear cab supports though, not the oem(which you want) I had to get them elsewhere.

http://www.wheelersautobody.com/

[shifty]

The goodmark website (I believe) lists vendors?

EDIT: yep, right here: http://www.goodmarkindustries.com/retail.html

[Novaguy73]

Green Machine .Why would somone want the OEM cab supports over the slip on ones? I honestly dont know this is going to be my first shot at any kind of body work and im trying to suck up as much info as i can...also Wheelers is about 5 minutes away...thanks man

BTW is tri-plus a quality manufacturer?

[screamin_c102]

Most Goodmark parts are re-labeled Tri-plus parts.

There is a thread somewhere about this.......

[screamin_c102]

Yep, here ya go CLICK ME

[70c10]

I would check with the board vendors first. If that fails, Summit Racing sells Goodmark sheet metal very reasonable and you will save a ton on shipping. Go to Goodmarks website and get your part numbers then go to Summit and type in the part numbers and you will be suprised at the price including shipping on large items.

[Green Machine]

Like mentioned above most parts are made by tri-plus regardless of who sells them. There are two kinds of front and rear cab supports, the metal piece. There are the "slip on" which are huge and look like crap, a bandaid, and the ones that are closer to original and look more like original. If I was that close I would sure check out Wheelers.