Cross sills for Steel bed floor available - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*FormerMember* · 01-07-2006, 01:09 PM

Which cross sills are these? I just bought three of the large ones from you folks and found that I need the small ones

MAR-Ktech · 01-07-2006, 01:20 PM

We make the large ones and small ones. We had the import parts for a while but decided to make them so they would be right. Pictures of the small ones are on our website catalog. Go to http://catalog.mar-k.com/ and select your truck, scroll down to "reinforcing strips" One is 72" long at the edge of the wheel tub and the other one is about 50" long and goes between the tubs. 72" long is $30 and the short one is $20.

Mar-Ktech

01-07-2006, 01:09 PM	#1
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Cross sills for Steel bed floor available Which cross sills are these? I just bought three of the large ones from you folks and found that I need the small ones

01-07-2006, 01:20 PM	#2
MAR-Ktech Truck Parts Mfg. Join Date: Jul 2005 Location: Oklahoma City, OK Posts: 697	Re: Cross sills for Steel bed floor available We make the large ones and small ones. We had the import parts for a while but decided to make them so they would be right. Pictures of the small ones are on our website catalog. Go to http://catalog.mar-k.com/ and select your truck, scroll down to "reinforcing strips" One is 72" long at the edge of the wheel tub and the other one is about 50" long and goes between the tubs. 72" long is $30 and the short one is $20. Mar-Ktech __________________ GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.