glove box help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

84 400 · 01-02-2006, 12:55 AM

I have a 1984 and a 1985 chevy c10"s the 84 i got from texas this september and it is all done up with wheels tires motor and paint any way one thing that is messed up on the 84 is the glove box plastic. however my 85 DD has a perfect peice of plastic in it. However the 84 has a black interior and the 85 is tan so a complete swap is not going to happen. How do i remove the latch (or thing u turn to open the glove box)?? onecw i have the lach off it will be no problom to swich the black plastic. thanks for the help.

Also on the 84 ?How i replace the seat belts and or where could i get new ones from for a good price??? i know it is all about saftey but i really hate to spend 100+ dollars on somthing i don't even want but this truck must be safe as my little brother will be riding in it when we take it to car shows. Thanks agian

84 400 · 01-02-2006, 05:51 PM

any oone taken one off before????

Slonaker · 01-02-2006, 07:06 PM

I have, but I don't remember how to remove the latch. I just messed with it for about 15 minutes, and <SPROING> it fell apart.

I read something that said you have to poke a straightened paper clip in the tiny hole in the latch, but that got me no results.

Slonaker

**swervin ervin** · 01-02-2006, 08:28 PM

Although I've never taken one out before I did save this from another post made about this.

The hole in the front does nothing. Do not pry off the outside knob, it just bends the pot metal tabs on the knob and you still can't get the assembly out. You need to depress spring-loaded tabs on the latch body itself. Open the glove box and look at the small window cut in the housing on the latch. Use a small screwdriver and depress while wiggling on the outside knob and pulling outward. After the inside of the latch comes out you still need a large Allen wrench to unscrew the collar to finally get the whole thing out. It's hard to see the spring-loaded tabs but after you get it out it's pretty simple!

84 400 · 01-02-2006, 09:19 PM

cool thanks man

Justins76 · 01-09-2006, 02:00 AM

I found this thread helpful http://67-72chevytrucks.com/vboard/s...d.php?t=140797

01-02-2006, 12:55 AM	#1
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	glove box help I have a 1984 and a 1985 chevy c10"s the 84 i got from texas this september and it is all done up with wheels tires motor and paint any way one thing that is messed up on the 84 is the glove box plastic. however my 85 DD has a perfect peice of plastic in it. However the 84 has a black interior and the 85 is tan so a complete swap is not going to happen. How do i remove the latch (or thing u turn to open the glove box)?? onecw i have the lach off it will be no problom to swich the black plastic. thanks for the help. Also on the 84 ?How i replace the seat belts and or where could i get new ones from for a good price??? i know it is all about saftey but i really hate to spend 100+ dollars on somthing i don't even want but this truck must be safe as my little brother will be riding in it when we take it to car shows. Thanks agian __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

01-02-2006, 05:51 PM	#2
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: glove box help any oone taken one off before???? __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

01-02-2006, 07:06 PM	#3
Slonaker Insert Witty Text Here Join Date: Oct 2002 Location: San Antonio, TX Posts: 3,415	Re: glove box help I have, but I don't remember how to remove the latch. I just messed with it for about 15 minutes, and <SPROING> it fell apart. I read something that said you have to poke a straightened paper clip in the tiny hole in the latch, but that got me no results. Slonaker __________________ '86 Chevy C10 (Sold 04/19/13 ) Stock '01 Silverado

01-02-2006, 08:28 PM	#4
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	Re: glove box help Although I've never taken one out before I did save this from another post made about this. The hole in the front does nothing. Do not pry off the outside knob, it just bends the pot metal tabs on the knob and you still can't get the assembly out. You need to depress spring-loaded tabs on the latch body itself. Open the glove box and look at the small window cut in the housing on the latch. Use a small screwdriver and depress while wiggling on the outside knob and pulling outward. After the inside of the latch comes out you still need a large Allen wrench to unscrew the collar to finally get the whole thing out. It's hard to see the spring-loaded tabs but after you get it out it's pretty simple! __________________ Mike 1985 Chevy C-10

01-02-2006, 09:19 PM	#5
84 400 Sb 400 club Join Date: Nov 2005 Location: NH / MA Posts: 2,746	Re: glove box help cool thanks man __________________ 1984 chevy c10, built 400sb,.(SOLD) 77 K10 Project / daily driver "The Grinch" http://67-72chevytrucks.com/vboard/s...d.php?t=318363 1956 Willys Wagon (327 chevy) Project (Now Buick 225) 1980 Corvette L-48 4 speed 1992 Mustang GT built 5.0 5 speed 1985 C10 LWB Sold 1982 K10 SWB plow truck Parted out 1986 D30 M1028 fire brush truck Parted out

01-09-2006, 02:00 AM	#6
Justins76 OutOfMyMind & I'llNeverKnowWhy Join Date: Apr 2004 Location: Another world, some other time Posts: 672	Re: glove box help I found this thread helpful http://67-72chevytrucks.com/vboard/s...d.php?t=140797 __________________ -Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page I don't like to save, it's more fun to spend!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.