Tunnel Ram setup, Holley 750DP, FP gauge - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ed455 · 12-28-2005, 08:21 PM

Selling some parts I wanted to finance parts I NEED.

Tunnel Ram, carbs and spacers - $425
Tunnel Ram and carbs w/o spaces - $375

Tunnel ram is a weiand that was polished but I wasn't to happy with the polish job so I bead blasted it and powdercoated it silver vein. It also has the runners drilled for future nitrous use.

Carbs are fresh but will need to be tuned. Have a pair of vacuum secondary equalizing dashpot tops. This will be included. This will make sure that the vacuum secondaries open at the same rate on both carbs. The 2" spacers are 4 hole phenolic spacers that will give a good strong signal to the carbs and should improve streetability, but I bought them mainly to try and get this setup tall enough to stick up though the hood of my '66.

Holley 750 Double pumper (List #4779) will need a kit and cleaning. $150

Fuel pressure gauge. Autometer machanical gauge in very good condition. Has the chrome mounting cup and mount. The mounting ring for the cup has VERY small pits that would require VERY close scrutiny to see. I think I could make them practically invisible with some steel wool. Also has a -4 an 90* fitting. $35

The other items will be in the 60-66 parts board. I intend to ebay all of this stuff monday unless someone on here wants it.

I WILL NOT SELL THE TUNNEL RAM AND CARBS SEPARATE.

SHIPPING NOT INCLUDED.

Ed

Custom_C5 · 12-28-2005, 09:59 PM

Sending pm on the tunnel ram

**JDL** · 12-28-2005, 10:03 PM

got a pic of the Fuel pressure gauge?

ed455 · 12-28-2005, 10:26 PM

Here ya go.

**JDL** · 12-28-2005, 10:40 PM

Ok I will take it. zip is 52530 for shipping. What do you need?

**JDL** · 01-10-2006, 08:40 PM

thanks for the nice gauge

*FormerMember* · 01-10-2006, 08:47 PM

Tunnel ram is for? BBC, SBC? Oval or Rectangular?

ed455 · 01-10-2006, 11:06 PM

SBC and it's sold. SOrry.

12-28-2005, 08:21 PM	#1
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Tunnel Ram setup, Holley 750DP, FP gauge Selling some parts I wanted to finance parts I NEED. Tunnel Ram, carbs and spacers - $425 Tunnel Ram and carbs w/o spaces - $375 Tunnel ram is a weiand that was polished but I wasn't to happy with the polish job so I bead blasted it and powdercoated it silver vein. It also has the runners drilled for future nitrous use. Carbs are fresh but will need to be tuned. Have a pair of vacuum secondary equalizing dashpot tops. This will be included. This will make sure that the vacuum secondaries open at the same rate on both carbs. The 2" spacers are 4 hole phenolic spacers that will give a good strong signal to the carbs and should improve streetability, but I bought them mainly to try and get this setup tall enough to stick up though the hood of my '66. Holley 750 Double pumper (List #4779) will need a kit and cleaning. $150 Fuel pressure gauge. Autometer machanical gauge in very good condition. Has the chrome mounting cup and mount. The mounting ring for the cup has VERY small pits that would require VERY close scrutiny to see. I think I could make them practically invisible with some steel wool. Also has a -4 an 90* fitting. $35 The other items will be in the 60-66 parts board. I intend to ebay all of this stuff monday unless someone on here wants it. I WILL NOT SELL THE TUNNEL RAM AND CARBS SEPARATE. SHIPPING NOT INCLUDED. Ed Attached Images __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L Last edited by ed455; 12-28-2005 at 10:25 PM.

12-28-2005, 09:59 PM	#2
Custom_C5 Registered User Join Date: Jun 2004 Location: ASS-hhh-ville Posts: 94	Re: Tunnel Ram setup, Holley 750DP, FP gauge Sending pm on the tunnel ram

12-28-2005, 10:03 PM	#3
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,847	Re: Tunnel Ram setup, Holley 750DP, FP gauge got a pic of the Fuel pressure gauge? __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

12-28-2005, 10:40 PM	#5
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,847	Re: Tunnel Ram setup, Holley 750DP, FP gauge Ok I will take it. zip is 52530 for shipping. What do you need? __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

01-10-2006, 08:40 PM	#6
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,847	Re: Tunnel Ram setup, Holley 750DP, FP gauge thanks for the nice gauge __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

12-28-2005, 10:26 PM	#4
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: Tunnel Ram setup, Holley 750DP, FP gauge Here ya go. Attached Images __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L

01-10-2006, 08:47 PM	#7
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: Tunnel Ram setup, Holley 750DP, FP gauge Tunnel ram is for? BBC, SBC? Oval or Rectangular?

01-10-2006, 11:06 PM	#8
ed455 Captain Ed Join Date: Jul 2003 Location: Port Charlotte, FL Posts: 1,241	Re: Tunnel Ram setup, Holley 750DP, FP gauge SBC and it's sold. SOrry. __________________ If you ain't bleedin', you ain't workin'! 1999 C3500 LS 7.4L



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.