efab man in charlotte/concord nc? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72hugger · 01-14-2006, 08:38 PM

I live in the area and am trying to contact you about some work.

Please post your contact info.

Thanks

ebfabman · 01-14-2006, 10:16 PM

I'm here. PM me if you can.

ebfabman · 01-15-2006, 10:40 AM

Hugger, I'm still here. The best way to contact me is here at the message board, I check in pretty much every day. If you can PM me, I'll give you my phone number and address.

Thanks....eb

72hugger · 01-15-2006, 05:36 PM

Sorry,
I missed the earlier post. I need some door skins replaced on a 72, and was looking for someone who can do them.

**BOSS** · 01-15-2006, 05:41 PM

not to get off subject but is there going to be any more dvd's made?

ebfabman · 01-15-2006, 11:05 PM

Hey BOSS I would really like to make more videos but as you probably know there needs to be quite a bit of interest to make it worth it. It's a lot of work. But I'm always open to suggestions.

Thanks for asking.........eb

RICHARD MORGAN · 01-16-2006, 12:43 AM

Efab,
I bought your DVD discs a year ago. I would definetly buy any more DVD's that are related to the 67-72 trucks.

68haywagon · 01-16-2006, 12:48 AM

I requested them for my B-day...my mom place an order yet?

MDC · 01-16-2006, 01:55 AM

I was planning on ordering a set. Are you out??????

ebfabman · 01-16-2006, 10:07 AM

MDC, I still have the cab repair DVD's. I think they mean videos covering other panel repair projects if I'm not mistaken. Originally I had planned to do several, in fact I have unedited footage of door repairs, frame shortening, and fuel filler patch install that also covers welding and metal finishing technique. Just takes more time than I've had lately to edit everything and make videos out of them and there needs to be a fairly strong interest to make it worth taking the time to do it all.

RICHARD, thanks again my friend.

paintpyro · 01-16-2006, 11:23 AM

Earl, I'd buy more if you made them. I keep watching mine. I just pulled mine in the garage. Floor and door repair.

Novaguy73 · 01-16-2006, 07:00 PM

E-fab, hey im concidering buying your videos because i need to replace the rusted out rockers, cab corners floors and floor braces in my 72' and would love to have a plan!! This may be a dumb question but does this video cover the replacement of the panels with the cab on the frame? Also I do have a wire feed welder but I have to ask, do i need any other special tools as well? I dont have any body work tools so im curious to see what all i need to buy to get it done. Thanks in advance man...

**BOSS** · 01-16-2006, 07:20 PM

I would love to see bed repairs also

ebfabman · 01-16-2006, 09:20 PM

Novaguy73 all the repairs on the DVD's are done with the cab on the frame. You will need some cutting and grinding tools and a few clamp type tools like various vice grips. Body hammers and dollies would come in handy also. Other than that, some personal protection items like safety glasses, ear plugs, and dust mask. Thats about all I can think of right now.

71meangreenc10 · 01-16-2006, 10:51 PM

I would say it would be worth making more DVD's, probably lots of interest for us beginners......

Smitty

01-14-2006, 08:38 PM	#1
72hugger Registered User Join Date: Jan 2002 Location: NC Posts: 130	efab man in charlotte/concord nc? I live in the area and am trying to contact you about some work. Please post your contact info. Thanks

01-14-2006, 10:16 PM	#2
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: efab man in charlotte/concord nc? I'm here. PM me if you can.

01-15-2006, 10:40 AM	#3
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: efab man in charlotte/concord nc? Hugger, I'm still here. The best way to contact me is here at the message board, I check in pretty much every day. If you can PM me, I'll give you my phone number and address. Thanks....eb

01-15-2006, 05:36 PM	#4
72hugger Registered User Join Date: Jan 2002 Location: NC Posts: 130	Re: efab man in charlotte/concord nc? Sorry, I missed the earlier post. I need some door skins replaced on a 72, and was looking for someone who can do them.

01-15-2006, 05:41 PM	#5
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Re: efab man in charlotte/concord nc? not to get off subject but is there going to be any more dvd's made? __________________ Support our site Norwood Survivor

01-15-2006, 11:05 PM	#6
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: efab man in charlotte/concord nc? Hey BOSS I would really like to make more videos but as you probably know there needs to be quite a bit of interest to make it worth it. It's a lot of work. But I'm always open to suggestions. Thanks for asking.........eb

01-16-2006, 12:43 AM	#7
RICHARD MORGAN Registered User Join Date: Jan 2004 Location: HERNDON VA Posts: 216	Re: efab man in charlotte/concord nc? Efab, I bought your DVD discs a year ago. I would definetly buy any more DVD's that are related to the 67-72 trucks.

01-16-2006, 12:48 AM	#8
68haywagon I'm watching you! Join Date: Feb 2005 Location: Levittown, PA Posts: 1,822	Re: efab man in charlotte/concord nc? I requested them for my B-day...my mom place an order yet? __________________ 2012 Chevrolet Silverado 1500 Z71 4WD 1993 Chevrolet C-1500 W/T - Blue - 4.3L V-6, 4 speed auto - Dad's (RIP) 1992 Chevrolet S10 - LS swap project 1968 Chevrolet C-10 longbed fleetside - sold

01-16-2006, 01:55 AM	#9
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: efab man in charlotte/concord nc? I was planning on ordering a set. Are you out?????? __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

01-16-2006, 10:07 AM	#10
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: efab man in charlotte/concord nc? MDC, I still have the cab repair DVD's. I think they mean videos covering other panel repair projects if I'm not mistaken. Originally I had planned to do several, in fact I have unedited footage of door repairs, frame shortening, and fuel filler patch install that also covers welding and metal finishing technique. Just takes more time than I've had lately to edit everything and make videos out of them and there needs to be a fairly strong interest to make it worth taking the time to do it all. RICHARD, thanks again my friend.

01-16-2006, 11:23 AM	#11
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	Re: efab man in charlotte/concord nc? Earl, I'd buy more if you made them. I keep watching mine. I just pulled mine in the garage. Floor and door repair. __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster

01-16-2006, 07:00 PM	#12
Novaguy73 Registered User Join Date: Oct 2005 Location: Waterloo, Ia Posts: 73	Re: efab man in charlotte/concord nc? E-fab, hey im concidering buying your videos because i need to replace the rusted out rockers, cab corners floors and floor braces in my 72' and would love to have a plan!! This may be a dumb question but does this video cover the replacement of the panels with the cab on the frame? Also I do have a wire feed welder but I have to ask, do i need any other special tools as well? I dont have any body work tools so im curious to see what all i need to buy to get it done. Thanks in advance man... __________________ -73' Nova 350 5-speed 9"rear, Runs 11's drives anywhere... -72' C10 350 Auto 12 bolt, runs 19's?? drives to work!

01-16-2006, 07:20 PM	#13
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,893	Re: efab man in charlotte/concord nc? I would love to see bed repairs also __________________ Support our site Norwood Survivor

01-16-2006, 09:20 PM	#14
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,489	Re: efab man in charlotte/concord nc? Novaguy73 all the repairs on the DVD's are done with the cab on the frame. You will need some cutting and grinding tools and a few clamp type tools like various vice grips. Body hammers and dollies would come in handy also. Other than that, some personal protection items like safety glasses, ear plugs, and dust mask. Thats about all I can think of right now.

01-16-2006, 10:51 PM	#15
71meangreenc10 Its a Truck Thing...... Join Date: Dec 2004 Location: Sierra Vista, Arizona Posts: 3,159	Re: efab man in charlotte/concord nc? I would say it would be worth making more DVD's, probably lots of interest for us beginners...... Smitty __________________ 71 C10 283/3SPD Full Resto 71 GMC 1500 Sierra Grande http://67-72chevytrucks.com/vboard/s...d.php?t=518599 70 C10 Suburban Former military GSA truck. 72 Chevy Blazer 4X4, Sloppy Jo, Mountain Climber. Wife says no more trucks. http://67-72chevytrucks.com/vboard/s...d.php?t=707378 72 GMC 1 Ton Motor Home, wife said no more trucks until she saw this one. Gen 3 6.0/4L80E 4.10 http://67-72chevytrucks.com/vboard/s...d.php?t=761110 68 GMC Suburban was 3/4 ton, now 1/2.Wife shook her head 71 C30 Wrecker 71 C20 Scott-Bilt As weird as it gets..BB Cheyenne AC Truck 68 GMC Long Stepside. They keep following me home 71 C20 Longhorn/Ole Yellor 69 C30 Former Motor Home, Flat Bed time



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.