Lowered BBC, and Frame off-ers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SanitysBane · 01-10-2006, 09:49 PM

This truck project is going to drive me further over the edge of sanity...anyways I have a couple of questions, first off, I plan on dropping the front of my truck 3-4inches, well already from time to time when I hit a bump in the road the bottom of the collectors on my headers hit. I think I remember something about someone running a pair of car headers, like maybe from a chevelle? Does anyone know about this or can point me in the right direction?

Question 2-I am wanting to replace the leaf spring bushings, How do you do this? I got a propane tourch and a press, any pointers? And what about the A-arm bushings? Should I replace them now or just not worry about it?

Thanks for any help guys.

stepside454 · 01-10-2006, 11:06 PM

I have heard of people runnin Chevelle headers.Ive got Sanderson shortys on my 454 cause the full length headers where draggin

f.monroe · 01-10-2006, 11:31 PM

If it a big block , a set of Hooker Competition (NOT SUPER COMPS)headers for a 68-72 Chevelle or a 70 -74 Camaro will do what you want (same part number ). They have 2 inch primaries and 3.5 inch collectors I think and fit just about level with the frame rails . You will have to trim the driver side frame rail on top to clear one of the tubes . A friend ran these on his truck with good results and the headers are big enough to let a nice BB breathe . His truck was an 82 SWB and I dont ever remember them dragging . I have seen the same application used for small blocks also but I dont know what trimming , if any , is required . Frank

SanitysBane · 01-11-2006, 12:13 AM

Thanks a ton guys! Hmm...Dad has a 68-72 chevelle with a BBC...I may need to borrow his headers for mockup...

f.monroe · 01-11-2006, 11:29 PM

Someone on this board is running those headers but I dont remember exactly who . Maybe AIRMALE (Sp?) . You might search the board . There was a discussion about them around 6 months ago . Frank

SanitysBane · 01-12-2006, 12:51 AM

Thanks, anyone know about the leaf spring bushings? I know some one around here has changed them before.

Russell · 01-12-2006, 02:01 AM

Thats a sucky job David!

Gotta burn the rubber outta the end of them with a torch, then scrape the rest out

**Captkaos** · 01-12-2006, 12:49 PM

I linked pictures to the Sanderson headers I am using on my truck in this post:
http://67-72chevytrucks.com/vboard/s...d.php?t=185391

stepside454 · 01-12-2006, 06:12 PM

Chris...very nice, same ones I have on mine.

AirMale · 01-12-2006, 08:12 PM

The Hooker comps, NOT SUPERCOMPS work. I believe it's part number #2455. 2"primaries and 3 1/2" collectors full length and tuck up between the frame.

SanitysBane · 01-15-2006, 06:23 PM

Thanks guys, does anyone have any pictures of were on the frame you need to notch?

f.monroe · 01-15-2006, 08:31 PM

My friends notch was on the top of the frame where the tube comes down from cylinder 7 . Airmales doesnt look notched in the pic so maybe it isnt necessary . It was a very small notch and my friend may have just thought he needed to notch it . Frank

SanitysBane · 01-16-2006, 01:30 PM

Awesome, thanks a ton for the help guys.

**Captkaos** · 01-17-2006, 12:09 PM

Quote:

Originally Posted by SanitysBane

Thanks guys, does anyone have any pictures of were on the frame you need to notch?

The sandersons on mine don't need a notch.

01-10-2006, 09:49 PM	#1
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	Lowered BBC, and Frame off-ers This truck project is going to drive me further over the edge of sanity...anyways I have a couple of questions, first off, I plan on dropping the front of my truck 3-4inches, well already from time to time when I hit a bump in the road the bottom of the collectors on my headers hit. I think I remember something about someone running a pair of car headers, like maybe from a chevelle? Does anyone know about this or can point me in the right direction? Question 2-I am wanting to replace the leaf spring bushings, How do you do this? I got a propane tourch and a press, any pointers? And what about the A-arm bushings? Should I replace them now or just not worry about it? Thanks for any help guys. __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

01-10-2006, 11:31 PM	#3
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Lowered BBC, and Frame off-ers If it a big block , a set of Hooker Competition (NOT SUPER COMPS)headers for a 68-72 Chevelle or a 70 -74 Camaro will do what you want (same part number ). They have 2 inch primaries and 3.5 inch collectors I think and fit just about level with the frame rails . You will have to trim the driver side frame rail on top to clear one of the tubes . A friend ran these on his truck with good results and the headers are big enough to let a nice BB breathe . His truck was an 82 SWB and I dont ever remember them dragging . I have seen the same application used for small blocks also but I dont know what trimming , if any , is required . Frank __________________ Born and proudly residing in a Red State !

01-11-2006, 12:13 AM	#4
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	Re: Lowered BBC, and Frame off-ers Thanks a ton guys! Hmm...Dad has a 68-72 chevelle with a BBC...I may need to borrow his headers for mockup... __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

01-11-2006, 11:29 PM	#5
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Lowered BBC, and Frame off-ers Someone on this board is running those headers but I dont remember exactly who . Maybe AIRMALE (Sp?) . You might search the board . There was a discussion about them around 6 months ago . Frank __________________ Born and proudly residing in a Red State !

01-12-2006, 12:51 AM	#6
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	Re: Lowered BBC, and Frame off-ers Thanks, anyone know about the leaf spring bushings? I know some one around here has changed them before. __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

01-10-2006, 11:06 PM	#2
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	Re: Lowered BBC, and Frame off-ers I have heard of people runnin Chevelle headers.Ive got Sanderson shortys on my 454 cause the full length headers where draggin __________________ 75 GMC C-15 short/step factory 454, lowered

01-12-2006, 02:01 AM	#7
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: Lowered BBC, and Frame off-ers Thats a sucky job David! Gotta burn the rubber outta the end of them with a torch, then scrape the rest out __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

01-12-2006, 12:49 PM	#8
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Re: Lowered BBC, and Frame off-ers I linked pictures to the Sanderson headers I am using on my truck in this post: http://67-72chevytrucks.com/vboard/s...d.php?t=185391 __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

01-12-2006, 06:12 PM	#9
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	Re: Lowered BBC, and Frame off-ers Chris...very nice, same ones I have on mine. Attached Images __________________ 75 GMC C-15 short/step factory 454, lowered

01-12-2006, 08:12 PM	#10
AirMale Senior Member Join Date: Jan 2003 Location: Atlantic City, NJ Posts: 1,073	Re: Lowered BBC, and Frame off-ers The Hooker comps, NOT SUPERCOMPS work. I believe it's part number #2455. 2"primaries and 3 1/2" collectors full length and tuck up between the frame. Attached Images __________________ 86 SWB 9.0 LITER T-400-OD 4.11 eaton-4/5 drop Best 1/4 12.51 @112mph no traction

01-15-2006, 06:23 PM	#11
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	Re: Lowered BBC, and Frame off-ers Thanks guys, does anyone have any pictures of were on the frame you need to notch? __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer

01-15-2006, 08:31 PM	#12
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Lowered BBC, and Frame off-ers My friends notch was on the top of the frame where the tube comes down from cylinder 7 . Airmales doesnt look notched in the pic so maybe it isnt necessary . It was a very small notch and my friend may have just thought he needed to notch it . Frank __________________ Born and proudly residing in a Red State !

01-16-2006, 01:30 PM	#13
SanitysBane Registered User Join Date: May 2004 Location: Lubbock, Texas Posts: 2,121	Re: Lowered BBC, and Frame off-ers Awesome, thanks a ton for the help guys. __________________ '96 Nissan Pathfinder '02 Firebird Trans Am. '88 K5 Blazer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.