|
01-12-2006, 02:55 PM
|
#1 |
|
Senior Member
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
|
windshield f/s
 driver shape $30.00 no shipping
|
|
|
|
01-12-2006, 11:54 PM
|
#2 |
|
Registered User
Join Date: Jul 2005
Location: Kernersville, NC
Posts: 599
|
Re: windshield f/s
is that clear or tented? i need one for my truck. how far are you from kernersville, nc 27284? thanks. chris.
__________________
its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump.   7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's |
|
|
|
|
01-13-2006, 12:09 AM
|
#3 |
|
Senior Member
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
|
Re: windshield f/s
it is clear i am 260 miles from you but i could meet you in weaverville nc sometime it is 10 miles north of asheville. bill
|
|
|
|
|
01-14-2006, 12:46 AM
|
#4 |
|
Registered User
Join Date: Jul 2005
Location: Kernersville, NC
Posts: 599
|
Re: windshield f/s
im deffently interested, but have to get my truck runnin first before i could met you anyhwhere.
 being a pain in the tail. you think you could meet me in galax, va?
__________________
its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's Last edited by 71chevytruckguy; 01-14-2006 at 12:46 AM. |
|
|
|
|
01-14-2006, 11:46 AM
|
#5 |
|
Senior Member
Join Date: Feb 2003
Location: rose hill V.A. 24281
Posts: 17,997
|
Re: windshield f/s
chris that is a 400 mile round trip for me that would be about $70.00 in gas . you could almost buy a new windshield buy the time you did that.
|
|
|
|
|
01-17-2006, 02:36 PM
|
#6 |
|
Registered User
Join Date: Jul 2005
Location: Kernersville, NC
Posts: 599
|
Re: windshield f/s
great price, but im gonna have to pass on the windshield. looks like im gonna have to rebuild the engine. thanks.
__________________
its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
