TACH dash for TRADE... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 01-17-2006, 08:21 PM

I just picked up an extra tach dash and would like to trade for a set of tow hooks, am/fm, or a speedwarning dash. + or - $$$ depending on what it is...
INFO: 8 cyl tach cluster, printed circuit looks very nice. I polished the lens and it looks good also. I have not hooked it up, but the tach needle moves freely. Previous owner cut the inner tin for the tach, but i didn't even notice when i bought it. Bezel is showing its age.

PT'S 70 CST · 01-17-2006, 08:26 PM

Would you by chance want to sell it.

PT

incoma · 01-17-2006, 08:56 PM

ditto what PT said.

Also, how do you polish the lense? What do you use?

**too much stuff** · 01-17-2006, 11:30 PM

At this point i would rather trade for some hard to find parts. To polish the lens i use meguires cleaner wax and follow it with carnuba wax and a variable speed buffer. If they are really scratched, i have wet sanded and buffed with good success. Eric

incoma · 01-17-2006, 11:35 PM

Thanks. I'll try that with my lens.

Do you do both sides or just the front?

**too much stuff** · 01-18-2006, 12:25 AM

Just the front, the numbers and letters on the back are "fragile". They can be wiped off if you are not careful.

teeitup · 01-18-2006, 12:50 AM

I got 2 old BUDWEISER Beer cans, still full too. They are the older ones, flat bottom tin ones. WANNA trade?

longhorn71 · 01-18-2006, 02:39 AM

what year tow hooks you looking for?I have a set on a 71 i could part with

generalgob · 01-20-2006, 12:16 PM

I have a complete tow hook and bar setup on a 83 that i could prbably get rid of I think they should fit

sakohntr · 01-20-2006, 02:16 PM

I never thought i would see the day when eric would pass along a tach dash. Your wall of fame will never be the same. Please note people, this may be your one and only chance to acquire it while strummer is in a coma!
Would'nt this one be like #15 or so???

**too much stuff** · 01-20-2006, 07:02 PM

Haha bruce! I think i am starting to come out of the coma. And don't forget, you got a tach out of me!!!!!!!
generalgob, I'm just looking for 67-72 parts right now. Thanks for the offer.

longhorn71 · 01-22-2006, 01:48 AM

email the pics to you Eric

*Don Loverink* · 01-22-2006, 01:59 PM

Wow Strummer parting with a Tach dash??? I have to put this on my Calender, he must have flipped his lid!! What are you down to 15 or 20 tach dash's left???

01-17-2006, 08:26 PM	#2
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	Re: TACH dash for TRADE... Would you by chance want to sell it. PT __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

01-17-2006, 08:56 PM	#3
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: TACH dash for TRADE... ditto what PT said. Also, how do you polish the lense? What do you use?

01-17-2006, 11:30 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: TACH dash for TRADE... At this point i would rather trade for some hard to find parts. To polish the lens i use meguires cleaner wax and follow it with carnuba wax and a variable speed buffer. If they are really scratched, i have wet sanded and buffed with good success. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-17-2006, 11:35 PM	#5
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Re: TACH dash for TRADE... Thanks. I'll try that with my lens. Do you do both sides or just the front?

01-18-2006, 12:25 AM	#6
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: TACH dash for TRADE... Just the front, the numbers and letters on the back are "fragile". They can be wiped off if you are not careful. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-17-2006, 08:21 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	TACH dash for TRADE... I just picked up an extra tach dash and would like to trade for a set of tow hooks, am/fm, or a speedwarning dash. + or - $$$ depending on what it is... INFO: 8 cyl tach cluster, printed circuit looks very nice. I polished the lens and it looks good also. I have not hooked it up, but the tach needle moves freely. Previous owner cut the inner tin for the tach, but i didn't even notice when i bought it. Bezel is showing its age. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-18-2006, 12:50 AM	#7
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: TACH dash for TRADE... I got 2 old BUDWEISER Beer cans, still full too. They are the older ones, flat bottom tin ones. WANNA trade? __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 01-18-2006 at 12:57 AM.

01-18-2006, 02:39 AM	#8
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: TACH dash for TRADE... what year tow hooks you looking for?I have a set on a 71 i could part with

01-20-2006, 12:16 PM	#9
generalgob Registered User Join Date: Dec 2005 Location: moore oklahoma Posts: 6	Re: TACH dash for TRADE... I have a complete tow hook and bar setup on a 83 that i could prbably get rid of I think they should fit __________________ 1970 C-10

01-20-2006, 02:16 PM	#10
sakohntr Registered User Join Date: Mar 2002 Location: Floodwood Minnesota Posts: 1,057	Re: TACH dash for TRADE... I never thought i would see the day when eric would pass along a tach dash. Your wall of fame will never be the same. Please note people, this may be your one and only chance to acquire it while strummer is in a coma! Would'nt this one be like #15 or so??? __________________ 1967 K30 Napco 292/SM420 original paint 30k miles 1968 K60 Napco 396/5spd. dbl frame 52" michelins 1969 K10 SWB GMC 454/4spd 6" 35's posi,hooks 1972 C30 longhorn,BB/AT,A/C,Tilt,Toolbox,lokr 1987 K20 Chevrolet Suburban. 6" lift. 5.7L/TH400 1979 K60 GMC Coleman 4x4, 427/Allison.

01-20-2006, 07:02 PM	#11
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,790	Re: TACH dash for TRADE... Haha bruce! I think i am starting to come out of the coma. And don't forget, you got a tach out of me!!!!!!! generalgob, I'm just looking for 67-72 parts right now. Thanks for the offer. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-22-2006, 01:48 AM	#12
longhorn71 Senior Member Join Date: Sep 2004 Location: CANADA Posts: 1,681	Re: TACH dash for TRADE... email the pics to you Eric

01-22-2006, 01:59 PM	#13
Don Loverink Account Suspended Join Date: Dec 2003 Location: Brainerd, Minnesota Posts: 1,063	Re: TACH dash for TRADE... Wow Strummer parting with a Tach dash??? I have to put this on my Calender, he must have flipped his lid!! What are you down to 15 or 20 tach dash's left???



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.