67 hood on 72 clip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WB72 · 09-16-2002, 06:02 PM

Will a 67 hood fit n a 72 front end or would I have to change the fenders as well?

68 with 350 TPI · 09-16-2002, 06:07 PM

you will also need the fenders to have it fit right.

Ed ke6bnl · 09-17-2002, 03:49 AM

We presently have 68 fenders with 70 hood and a 70 grille. It wouldn't have worked if we new it was not suppose to but it fits unnoticable for now. The truck came in (new) pieces that we fit together till we got to the Brothers chevy truck show and found we had the wrong combonation of parts. When my boy gets some money he may go with the 67 hood and grille. Good luck Ed ke6bnl

chevy2racr · 09-17-2002, 09:45 AM

any hood will go on any year fenders if you have the right latch, the 67-68 hood will go on a 69-72 fender set BUT without modification the grill won't work at all, I have a picture I'll post later
Bryce

Reumster · 09-17-2002, 11:07 AM

I've allways wanted to put a 67 Cowl hood, on a stock 72 front clip. How hard will this be to make it look right?

chevy2racr · 09-17-2002, 01:59 PM

looks sweet, but man, it'd take work, I plan to get a 67-8 hood and try my luck and see what I can figure out sometime

dubie · 09-17-2002, 02:51 PM

As far as I know, you can do it but you need everything. You need the 67 rad support, fenders and hood to make it all work. I have been debating on whether the swap my 72 chevy front clip for a 67 GMC front clip. The parts are available to me, so it's in the works

Stroker · 09-17-2002, 06:46 PM

chevy2racr I've been thinking of doing the same thing for awhile now. If you figure out how to do it let me know. BTW was that an actual pic of a truck with the mod or some digital magic....Stroker

chevy2racr · 09-17-2002, 06:54 PM

stroker, that is supposbly an acutal one, I bet it is, the side maker lamps are shaved too, Someone posted that a while back, I may go look for a hood this weekend infact, get sometign o play with :-D

THOR 50 · 09-17-2002, 07:08 PM

To help out here, the 67-68 chevy fenders and the GMC's up to 72 (I believe) are the same, you need the correct grill top bar hood latch and hood to do this swap.
I
tryed to put the 67 hood on my '69 GMC front clip and it sits too far forward. The hood latch doesn't line up and it hits the top bar of the grill so it won't close.

To mate the hood up you need the correct fenders so the hood lines up, the thinner grill top bar 67-68 GMC and the 67-68 hood latch.
Good luck!

09-16-2002, 06:02 PM	#1
WB72 Before and After Join Date: Feb 2000 Location: Leduc, Alberta CANADA Posts: 632	67 hood on 72 clip Will a 67 hood fit n a 72 front end or would I have to change the fenders as well? __________________ Not Grandpa's C-20 anymore... 383 Stroker 425HP, 485Ft/Lbs Lowered 3.5" Front / 5" Rear 66,000 miles. Alberta, CANADA

09-16-2002, 06:07 PM	#2
68 with 350 TPI Registered User Join Date: May 2002 Location: Wingate NC Posts: 456	you will also need the fenders to have it fit right. __________________ Life is good with a 6-71 supercharged 355 in a 72 camaro

09-17-2002, 03:49 AM	#3
Ed ke6bnl Registered User Join Date: Mar 2002 Location: Agua Dulce, Ca. usa Posts: 179	We presently have 68 fenders with 70 hood and a 70 grille. It wouldn't have worked if we new it was not suppose to but it fits unnoticable for now. The truck came in (new) pieces that we fit together till we got to the Brothers chevy truck show and found we had the wrong combonation of parts. When my boy gets some money he may go with the 67 hood and grille. Good luck Ed ke6bnl __________________ Ed ke6bnl Agua Dulce 70 S.E. Los Angeles 70 Chevy short bed 1948 F3 ford pu 1949 F1 stock V8 flathead 3 on floor 1950 F1 pu street rod 1948 F6 Ford Dually/350sbc no bed stock trans&rear 1972 El Camino 4" chop 1953 Chevy 3100 2b daily driver 1970 SB 4X4 400ci 6in lift

09-17-2002, 09:45 AM	#4
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	any hood will go on any year fenders if you have the right latch, the 67-68 hood will go on a 69-72 fender set BUT without modification the grill won't work at all, I have a picture I'll post later Bryce __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

09-17-2002, 11:07 AM	#5
Reumster L.E.D. Freak Join Date: Jan 2002 Location: Polson MT Posts: 1,358	I've allways wanted to put a 67 Cowl hood, on a stock 72 front clip. How hard will this be to make it look right? __________________ Specializing in Custom L.E.D. inserts. http://www.ccled.com/ Contact me @ blazer2wd1972@hotmail.com (406)675-8082 or Joel @ jmcwaters@eps-corp.net 1972 2wd Blazer, 350/700R4/3:73 posi, err & Custom L.E.D. inserts! LOL

09-17-2002, 01:59 PM	#6
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	looks sweet, but man, it'd take work, I plan to get a 67-8 hood and try my luck and see what I can figure out sometime Attached Images __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

09-17-2002, 02:51 PM	#7
dubie Registered User Join Date: May 2000 Location: Flin Flon, Manitoba, Canada Posts: 8,853	As far as I know, you can do it but you need everything. You need the 67 rad support, fenders and hood to make it all work. I have been debating on whether the swap my 72 chevy front clip for a 67 GMC front clip. The parts are available to me, so it's in the works __________________ My name's Tim and I'm a truckaholic My 56 Chevy shop truck build http://67-72chevytrucks.com/vboard/s...d.php?t=562795

09-17-2002, 06:46 PM	#8
Stroker Registered User Join Date: Mar 2001 Location: Moore, Ok Posts: 1,149	chevy2racr I've been thinking of doing the same thing for awhile now. If you figure out how to do it let me know. BTW was that an actual pic of a truck with the mod or some digital magic....Stroker __________________ 72 SWB parts and pieces Oklahoma

09-17-2002, 06:54 PM	#9
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	stroker, that is supposbly an acutal one, I bet it is, the side maker lamps are shaved too, Someone posted that a while back, I may go look for a hood this weekend infact, get sometign o play with :-D __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

09-17-2002, 07:08 PM	#10
THOR 50 Over worked under paid Join Date: May 2001 Location: Fort Myers, Florida Posts: 378	An little help To help out here, the 67-68 chevy fenders and the GMC's up to 72 (I believe) are the same, you need the correct grill top bar hood latch and hood to do this swap. I tryed to put the 67 hood on my '69 GMC front clip and it sits too far forward. The hood latch doesn't line up and it hits the top bar of the grill so it won't close. To mate the hood up you need the correct fenders so the hood lines up, the thinner grill top bar 67-68 GMC and the 67-68 hood latch. Good luck! __________________ Roger '69 C-10 with GMC front clip billet grill, 283CI, 400TH and 12bolt posiw/3.73 gears



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.