Whatever you do,don`t cut those doors for speakers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 01-25-2006, 10:28 PM

Some believe it`s a mortal sin to cut doors for speakers.Many ask for options.So,here ya go:

**kwmech** · 01-25-2006, 10:30 PM

What, no tunes for the drivers side?

phlegm · 01-25-2006, 10:31 PM

You know someone (smarter then me) could make some money by making little speakers that screwed into the Shoulder harness holes.

CoolRide · 01-25-2006, 10:32 PM

Hahaha what a awesome idea!

Brad · 01-25-2006, 10:32 PM

I'm against cutting up good vintage steel like what's pictured, but in the..... glovebox????

pebbleboy · 01-25-2006, 10:32 PM

Thats gotta sound even

4tiresngas · 01-25-2006, 10:33 PM

I'm one of those who believes it is a sin to cut the door. I bought repo doors to replace my butchered doors. However, I'm not so sure about the glove box door option. At least it is not as expensive to replace it.

Longhorn Man · 01-25-2006, 10:44 PM

personally, I'd rather have to weld up a couple small holes in the door, than to have the truck's SPID label ruined for ever.
Plus, that just looks 100% retarded.

**FRENCHBLUE72** · 01-25-2006, 10:46 PM

How would you like to eat those in a wreck???

buildin72 · 01-25-2006, 10:54 PM

That looks even dumber than them being in the doors!!! The doors i have for my truck that i got cheap, have the holes cut in them. I just gonna use them for spraying practice and buy new, pricey ones.

kelsfine69 · 01-25-2006, 10:57 PM

The guy sitting in the pass side will look like "Is it live or is it Memorex"

bad68bowtie · 01-25-2006, 11:11 PM

A previous owner did it. I can't say that I recommend it a whole lot, but it is better than just the one speaker. I've been planning to move em down to the kick panels for a while now but I can't seem to keep enough money for all of that.

JAKES 68GMC · 01-25-2006, 11:19 PM

Good idea but looks crappy. I was thinking two waterproof universal-mount speakers mounted under the seat.
When I was taking the plow off of my truck, I was pulling out the control box, an I found something dangling, kinda felt like pantyhose

so I yanked on it, and probably a 25+ year old speaker carcass comes out in crumbles.

**special-K** · 01-25-2006, 11:27 PM

Hey Longhornman:

Ha ha ha
Anyone notice the cut dash?This truck is all original except for the audio phileage.

LUV2XCLR8 · 01-25-2006, 11:34 PM

Quote:

Originally Posted by phlegm

You know someone (smarter then me) could make some money by making
little speakers that screwed into the Shoulder harness holes.

69moneypit · 01-26-2006, 01:15 AM

When I was a kid my dad bought a used 68 that had an eq cut into the middle of the glove door.

01-25-2006, 10:28 PM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Whatever you do,don`t cut those doors for speakers Some believe it`s a mortal sin to cut doors for speakers.Many ask for options.So,here ya go: __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-25-2006, 10:30 PM	#2
kwmech Senior Member Join Date: Mar 2003 Location: Colfax-California Posts: 8,480	Re: Whatever you do,don`t cut those doors for speakers What, no tunes for the drivers side?

01-25-2006, 10:31 PM	#3
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Re: Whatever you do,don`t cut those doors for speakers You know someone (smarter then me) could make some money by making little speakers that screwed into the Shoulder harness holes. __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was

01-25-2006, 10:32 PM	#4
CoolRide Registered User Join Date: Dec 2005 Location: Spokane Washington Posts: 85	Re: Whatever you do,don`t cut those doors for speakers Hahaha what a awesome idea!

01-25-2006, 10:32 PM	#5
Brad Out of the carpool lane. Join Date: Jan 2000 Location: Clark Co, WA Posts: 5,673	Re: Whatever you do,don`t cut those doors for speakers I'm against cutting up good vintage steel like what's pictured, but in the..... glovebox???? __________________ 1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten...

01-25-2006, 10:33 PM	#7
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	Re: Whatever you do,don`t cut those doors for speakers I'm one of those who believes it is a sin to cut the door. I bought repo doors to replace my butchered doors. However, I'm not so sure about the glove box door option. At least it is not as expensive to replace it. __________________ Dan dan.brue@us.army.mil

01-25-2006, 10:44 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Whatever you do,don`t cut those doors for speakers personally, I'd rather have to weld up a couple small holes in the door, than to have the truck's SPID label ruined for ever. Plus, that just looks 100% retarded.

01-25-2006, 10:46 PM	#9
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,594	Re: Whatever you do,don`t cut those doors for speakers How would you like to eat those in a wreck??? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-25-2006, 10:54 PM	#10
buildin72 Registered User Join Date: Oct 2005 Location: Corinth, (northern) KY Posts: 64	Re: Whatever you do,don`t cut those doors for speakers That looks even dumber than them being in the doors!!! The doors i have for my truck that i got cheap, have the holes cut in them. I just gonna use them for spraying practice and buy new, pricey ones. __________________ *-ADAM* 2006 GMC Sierra 2500HD 4x4 Reg. Cab Long Bed LBZ Duramax Allison 6sp 1970 Chevy C/10 Short Bed

01-25-2006, 10:57 PM	#11
kelsfine69 18 Till I Die Join Date: Mar 2005 Location: Alberta, Canada Posts: 1,522	Re: Whatever you do,don`t cut those doors for speakers The guy sitting in the pass side will look like "Is it live or is it Memorex" __________________ 2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home...

01-25-2006, 11:11 PM	#12
bad68bowtie On the college boy budget... Join Date: Oct 2005 Location: Athens, Georgia Posts: 370	Re: Whatever you do,don`t cut those doors for speakers A previous owner did it. I can't say that I recommend it a whole lot, but it is better than just the one speaker. I've been planning to move em down to the kick panels for a while now but I can't seem to keep enough money for all of that. __________________ -'68 C10 short/step- 350/350

01-25-2006, 11:19 PM	#13
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,212	Re: Whatever you do,don`t cut those doors for speakers Good idea but looks crappy. I was thinking two waterproof universal-mount speakers mounted under the seat. When I was taking the plow off of my truck, I was pulling out the control box, an I found something dangling, kinda felt like pantyhose so I yanked on it, and probably a 25+ year old speaker carcass comes out in crumbles.

01-25-2006, 11:27 PM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: Whatever you do,don`t cut those doors for speakers Hey Longhornman: Ha ha ha Anyone notice the cut dash?This truck is all original except for the audio phileage. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

01-26-2006, 01:15 AM	#16
69moneypit Divorced .....WITH KIDS Join Date: Dec 2003 Location: mississippi Posts: 619	Re: Whatever you do,don`t cut those doors for speakers When I was a kid my dad bought a used 68 that had an eq cut into the middle of the glove door. __________________ 1969 GMC SWB 1975 Chevy Malibu 80k 1963 Ford Galaxie 63k (inherited) 2005 Nissan Armada (wife's idea)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.