I cant find her dimples - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tphsmith · 01-29-2006, 08:04 AM

I have been trying, looking, searching, and getting no where. I am working on a big jig saw puzzle 72 swb. Im changing my non A/C cab to A/C. a few guys have posted a guide on here where to cut the fire wall for the blower and evaporator asm. and I have also been told there will be dimples in the plenum for the location of the air shut off valve. well to this point. this area has been repaired with a new peice of sheet metal because it had rusted out. now after that was done a few years ago. now I want to make the cab a/c. so the dimples are gone. my cab has lost the dimples. can anyone PLEASE post some pics of the location of the air shut off valve like maybe a few when they were reassembling the system to the firewall. or is there anyway some one can measure the location where the three holes need to be from a refrence of the hole in the plenum where the corner of the evap and blower assembly mounts to the firewall near the three holes I need to drill in the wall or other form of refrence point. (the wife says she'll buy someone a 12 pack.its worth a 12 pack to anyone who can help, she cant stand my frustration on this issue with the truck). and to close for now just a bit more, I need to find a few parts for this also in the assembly manual it shows a few parts I dont have. I have bought 3 units now that have come off the trucks and I still am not getting all the parts. I need the cover that supports the three holes and the actuator assembly and hardware for the air shut off valve thanks for reading and I sure hope someone can help me out

neonlarry · 01-29-2006, 11:50 AM

I don't know if this will help or not:
http://67-72chevytrucks.com/vboard/s...ad.php?t=78378

tphsmith · 01-29-2006, 02:21 PM

somebody has to have a picture of the holes for the evap and blower box holes and the drilled holes dont ya??????

Botietruck · 01-29-2006, 05:41 PM

Hope this helps. I converted my cab to an a/c cab. If you will notice, the reference point on the firewall is the center of the bolt hole for the cowl piece, and the reference point for the hole inside the cab, behind the glove box is the seam to the right of the hole It looks to be about 2 13/16 " from the seam to the center of the hole.
IMG]http://i6.photobucket.com/albums/y249/Botietruck/Chevyresopics100.jpg[/IMG]

tphsmith · 01-29-2006, 07:34 PM

wow this is what i realy need. THANKYOU Botietruck. maybe this needs to be put in the FAQ's because this will happen again we know it will

01-29-2006, 08:04 AM	#1
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	I cant find her dimples I have been trying, looking, searching, and getting no where. I am working on a big jig saw puzzle 72 swb. Im changing my non A/C cab to A/C. a few guys have posted a guide on here where to cut the fire wall for the blower and evaporator asm. and I have also been told there will be dimples in the plenum for the location of the air shut off valve. well to this point. this area has been repaired with a new peice of sheet metal because it had rusted out. now after that was done a few years ago. now I want to make the cab a/c. so the dimples are gone. my cab has lost the dimples. can anyone PLEASE post some pics of the location of the air shut off valve like maybe a few when they were reassembling the system to the firewall. or is there anyway some one can measure the location where the three holes need to be from a refrence of the hole in the plenum where the corner of the evap and blower assembly mounts to the firewall near the three holes I need to drill in the wall or other form of refrence point. (the wife says she'll buy someone a 12 pack.its worth a 12 pack to anyone who can help, she cant stand my frustration on this issue with the truck). and to close for now just a bit more, I need to find a few parts for this also in the assembly manual it shows a few parts I dont have. I have bought 3 units now that have come off the trucks and I still am not getting all the parts. I need the cover that supports the three holes and the actuator assembly and hardware for the air shut off valve thanks for reading and I sure hope someone can help me out __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

01-29-2006, 11:50 AM	#2
neonlarry Registered User Join Date: Feb 2002 Location: Vacaville, CA Posts: 2,746	Re: I cant find her dimples I don't know if this will help or not: http://67-72chevytrucks.com/vboard/s...ad.php?t=78378 __________________ 70 C/10 Light Red 350/TH350, HEI, Duals w/40 series Flows, 91 seat, LED taillights 99 Pontiac S/C GTP, SLP Ram Air hood, GMPP Konis & springs 95 Neon ACR, MP PCM, AFX UDP, 3.0 CAI

01-29-2006, 02:21 PM	#3
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: I cant find her dimples somebody has to have a picture of the holes for the evap and blower box holes and the drilled holes dont ya?????? __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck

01-29-2006, 05:41 PM	#4
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Re: I cant find her dimples Hope this helps. I converted my cab to an a/c cab. If you will notice, the reference point on the firewall is the center of the bolt hole for the cowl piece, and the reference point for the hole inside the cab, behind the glove box is the seam to the right of the hole It looks to be about 2 13/16 " from the seam to the center of the hole. IMG]http://i6.photobucket.com/albums/y249/Botietruck/Chevyresopics100.jpg[/IMG] __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive! Last edited by Botietruck; 01-29-2006 at 05:44 PM.

01-29-2006, 07:34 PM	#5
tphsmith still buypickupparts Join Date: Sep 2003 Location: charlotte Posts: 637	Re: I cant find her dimples wow this is what i realy need. THANKYOU Botietruck. maybe this needs to be put in the FAQ's because this will happen again we know it will __________________ Its Gonna be a Great Day, I woke up this Morning. 72 SWB Fleetside freshly painted. putting a 94 LT1 with 700R4 tranny lowered 4 in the front 6 in the back 81 chevy half ton 350 89 Silverado 4x4 going ta church truck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.