|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-17-2002, 08:42 PM
|
#1 | |
|
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
back to front rake of a stock 71 3/4 ton 4x4?
anyone out there that can measure this for me? also whats the distance from the middle of your hub to the wheel arch opening at the top (towards hood)? i put a lift on the front of mine and id like to get an idea of how much i lifted it.
so far ive only got the left lifted, and theres a 2.5 difference in hub to arch on left and hub to arch on right
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
|
|
|
09-18-2002, 12:30 AM
|
#2 |
|
Registered User
Join Date: Jan 2002
Location: Lemon Grove, California
Posts: 152
|
I have a '71 K20 with stock height and running 33's.Anyway,it
sits with slight rake,little lower in front.From ground to top of fender well arch,the front measures 37 inches and the rear is around 38 inches.At front, the measurement from hub center to fenderwell arch is about 21 1/4 inches.I would like a 4 inch lift to fit 35's someday. |
|
|
|
|
09-18-2002, 10:23 PM
|
#3 | |
|
Bloo
Join Date: Feb 2001
Location: Barren County Kentucky
Posts: 6,285
|
mines 24" from hub to arch, so i guess im lifting it about 2 3/4 inches..not too bad for free
__________________
ASE Master Certified-GM Trained-Mechanic 1968 Chevy C30 157" WB Wrecker 1969 Chevy CST/10 SWB 1971 Chevy Custom/10 (first truck) 350, NV3500 5 speed 1971 Chevy K20 Custom Camper 4x4 350 TBI, SM465/NP205 1974 Chevy Custom Deluxe/10 1979 Chevy Custom Deluxe K10 farm truck beater 1989 Chevy K2500 Quote:
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
