3 speed trans ? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

farside847 · 01-30-2006, 03:30 PM

Stupid question, but I am ttrying to figure out if the 2004r is the same length as my 3 speed manual saginaw. Anyone know the model number of this tranny, or better yet, the length? Its in a 71 c10 w/307

farside847 · 01-31-2006, 01:20 PM

ttt

**VetteVet** · 01-31-2006, 01:27 PM

You might want to add this to your favorites

http://www.tciauto.com/tech_info/trans_dims.htm

farside847 · 01-31-2006, 02:30 PM

Quote:

Originally Posted by VetteVet

You might want to add this to your favorites

http://www.tciauto.com/tech_info/trans_dims.htm

Thanks, thats a great site but it does not list the 3 speed. (I dont think so anyway, there are a few trans there I dont recognize)

Tx Firefighter · 01-31-2006, 04:31 PM

Coincidentally, I measured my Saginaw 3 speed yesterday. It was right at 29 inches long from front of bellhousing to rear of trans.

crazy longhorn · 01-31-2006, 05:26 PM

Your saginaw 3 spd + bell, is the same lenght as a short 350 turbo, the mount is in the same spot, & the slip yolk has the same dia/spline

L

bluec10 · 01-31-2006, 07:04 PM

Thanks for the link VetteVet.

krue · 01-31-2006, 11:47 PM

Quote:

Originally Posted by crazy longhorn

Your saginaw 3 spd + bell, is the same lenght as a short 350 turbo, the mount is in the same spot, & the slip yolk has the same dia/spline

L

Which means that the 2004r should be the same (since it's a bolt in replacement (you know what I mean) for the short th350).

**VetteVet** · 02-01-2006, 01:56 AM

Quote:

Originally Posted by bluec10

Thanks for the link VetteVet.

You're welcome -V.V.

farside847 · 02-01-2006, 12:46 PM

Sweeeeeeet. thanks guys!

**70STOVEBOLT** · 02-01-2006, 01:17 PM

So is a TH400 the same length as a Saginaw?

crazy longhorn · 02-01-2006, 05:15 PM

Quote:

Originally Posted by 70STOVEBOLT

So is a TH400 the same length as a Saginaw?

No, the 400(shortie) is 11/16 " longer, & has a larger slip yolk.....also the mount is positioned in a different spot.....

L

01-30-2006, 03:30 PM	#1
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	3 speed trans ? Stupid question, but I am ttrying to figure out if the 2004r is the same length as my 3 speed manual saginaw. Anyone know the model number of this tranny, or better yet, the length? Its in a 71 c10 w/307 __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

01-31-2006, 01:20 PM	#2
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	Re: 3 speed trans ? ttt __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

01-31-2006, 01:27 PM	#3
VetteVet Msgt USAF Ret Join Date: Jan 2005 Location: Kalamazoo, Michigan Posts: 8,709	Re: 3 speed trans ? You might want to add this to your favorites http://www.tciauto.com/tech_info/trans_dims.htm __________________ VetteVet metallic green 67 stepside 74 corvette convertible 1965 Harley sportster 1995 Harley wide glide Growing old is hell, but it beats the alternative.

01-31-2006, 04:31 PM	#5
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: 3 speed trans ? Coincidentally, I measured my Saginaw 3 speed yesterday. It was right at 29 inches long from front of bellhousing to rear of trans. __________________ I'm on the Instagram- @Gearhead_Kevin

01-31-2006, 05:26 PM	#6
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Re: 3 speed trans ? Your saginaw 3 spd + bell, is the same lenght as a short 350 turbo, the mount is in the same spot, & the slip yolk has the same dia/spline L __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

01-31-2006, 07:04 PM	#7
bluec10 Registered User Join Date: Apr 2002 Location: Manitoba, Canada Posts: 663	Re: 3 speed trans ? Thanks for the link VetteVet. __________________ Present: 2015 Tacoma. Yeah, not a GM, but I love it. 1969 GMC 32,000 - fix, drive, relax, fix... 2019 BMW R1250 GSA - Yahoooooooo 1979 Honda GL 1000 - retro touring at its best. Past: '05 Sierra 4x4 - Had 270,000 KM and running well when it was written-off by a stop sign runner. '94 F-150 from the "F word" company. I'll admit it...good truck. Sold what was left of it for $800 to a guy who came to pick it up at 11:00 PM with cash in hand. Hmm. '79 Sierra Grande (Black) organ donor - perfect rebuildable 4-bolt 350 and a good TH350. '76 Sierra Grande (Orange) - hate isn't too strong a word. Kid who bought it turned it into a hot rod. '68 C-10 R.I.P. - Dad's old truck...too far gone to resurrect. '59 C-50 - with hoist. Truck is gone, wife isn't. Nuff said.

02-01-2006, 12:46 PM	#10
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	Re: 3 speed trans ? Sweeeeeeet. thanks guys! __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree

02-01-2006, 01:17 PM	#11
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,257	Re: 3 speed trans ? So is a TH400 the same length as a Saginaw?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.