soft bed cover... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Prerunner1982 · 02-03-2006, 01:09 AM

I know alot of you guys prefer hard bed covers... but unless its a flush cover the hard covers just dont look right.. i am no building a show truck but would still like something for my wifes truck, so we can haul groceries and stuff in the back and keep them dry, not blow around, and not full of dirt.. what are some decent ones? button down or velcro?... If i have to i could build one out of wood.. i am not too concerned about looks, but wifes truck is a bit nicer than mine anyways.. so would like something decent..

popparipper · 02-03-2006, 01:27 AM

i was at wallymart and they had soft bed covers for trucks they look nice and they arent very exspensive check it out

Goodys86 · 02-03-2006, 03:59 AM

Yes, Id like a soft one as well to cover my newly installed fuel cell. Any more suggestions?

Army_Dude · 02-03-2006, 09:26 AM

I had a TEKSTYLE (spelling?) on my 95. I really liked it. Don't remember the price right offhand. I had the one with the hook seals. Kinda like a ziploc bag. It also came with bows so it wouldn't sag. Best part was, it had a rail system that clamp to your bed rails and if you want you can remove it COMPLETELY in about 5 mins.

Joe67 · 02-03-2006, 09:45 AM

Tekstyle or Extang are the two I would recommend.
In colder climates, avoid snap type covers, they are a pain to close up in the winter.

Right now I have the Extang Sabre soft tonneau on my 2000 GMC Sierra.

stepside454 · 02-03-2006, 10:50 AM

you could make one like I did.

Joe67 · 02-03-2006, 11:31 AM

Quote:

Originally Posted by stepside454

you could make one like I did.

How thick is that plywood? Looks pretty heavy

stepside454 · 02-03-2006, 12:16 PM

the plywood is 5/16" the aluminum tubing is 1" square

stepside454 · 02-03-2006, 12:23 PM

had me curious, so I put each of the 2 pieces on the scale. they each weigh about 24 lbs., so less than 50 lbs. total with everything. John

bigblock73 · 02-03-2006, 12:57 PM

Jon, I had a Tekstyle cover on Yeller...loved it! It was a sliding snap system, no holes to drill, and the TG opens without having to undo any snaps. Was just over $200. You can get them from Summitt. Here are some pics of my truck with it on (bottom of page)

http://www.73-87.com/my_truck/mytruck2.htm

stepside454 · 02-03-2006, 01:12 PM

that looks good 2 Jeff. John

piecesparts · 02-03-2006, 09:55 PM

I am running Extang "Platinum" covers on two different trucks and they are a well built cover and stand up well. The Extang product has a lifetime warranty on most of their parts and a phone call to them will get replacement parts without cost.

02-03-2006, 01:09 AM	#1
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,906	soft bed cover... I know alot of you guys prefer hard bed covers... but unless its a flush cover the hard covers just dont look right.. i am no building a show truck but would still like something for my wifes truck, so we can haul groceries and stuff in the back and keep them dry, not blow around, and not full of dirt.. what are some decent ones? button down or velcro?... If i have to i could build one out of wood.. i am not too concerned about looks, but wifes truck is a bit nicer than mine anyways.. so would like something decent.. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

02-03-2006, 01:27 AM	#2
popparipper Registered User Join Date: Jan 2006 Location: toronto Posts: 11	Re: soft bed cover... i was at wallymart and they had soft bed covers for trucks they look nice and they arent very exspensive check it out

02-03-2006, 03:59 AM	#3
Goodys86 Registered User Join Date: Aug 2004 Location: Jacksonville,FL Posts: 145	Re: soft bed cover... Yes, Id like a soft one as well to cover my newly installed fuel cell. Any more suggestions? __________________ 86 C-10 SWB 2wd -355/TH350, 3:73's (Vin# says its a V6) Best ET: 13.0 @ 101mph (NA) 11.9 @ 108mph (100 shot) 02 Chevy 2500HD DMax (tow vehicle) 84 GMC Sierra 2500 00 Formula M6 hardtop

02-03-2006, 09:26 AM	#4
Army_Dude Registered User Join Date: Dec 2005 Location: Fayetteville, NC Posts: 187	Re: soft bed cover... I had a TEKSTYLE (spelling?) on my 95. I really liked it. Don't remember the price right offhand. I had the one with the hook seals. Kinda like a ziploc bag. It also came with bows so it wouldn't sag. Best part was, it had a rail system that clamp to your bed rails and if you want you can remove it COMPLETELY in about 5 mins.

02-03-2006, 09:45 AM	#5
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: soft bed cover... Tekstyle or Extang are the two I would recommend. In colder climates, avoid snap type covers, they are a pain to close up in the winter. Right now I have the Extang Sabre soft tonneau on my 2000 GMC Sierra. __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

02-03-2006, 10:50 AM	#6
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	Re: soft bed cover... you could make one like I did. Attached Images __________________ 75 GMC C-15 short/step factory 454, lowered

02-03-2006, 12:16 PM	#8
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	Re: soft bed cover... the plywood is 5/16" the aluminum tubing is 1" square __________________ 75 GMC C-15 short/step factory 454, lowered

02-03-2006, 12:23 PM	#9
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	Re: soft bed cover... had me curious, so I put each of the 2 pieces on the scale. they each weigh about 24 lbs., so less than 50 lbs. total with everything. John __________________ 75 GMC C-15 short/step factory 454, lowered

02-03-2006, 12:57 PM	#10
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	Re: soft bed cover... Jon, I had a Tekstyle cover on Yeller...loved it! It was a sliding snap system, no holes to drill, and the TG opens without having to undo any snaps. Was just over $200. You can get them from Summitt. Here are some pics of my truck with it on (bottom of page) http://www.73-87.com/my_truck/mytruck2.htm __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-03-2006, 01:12 PM	#11
stepside454 Registered User Join Date: Nov 2003 Location: st. louis area Posts: 1,551	Re: soft bed cover... that looks good 2 Jeff. John __________________ 75 GMC C-15 short/step factory 454, lowered

02-03-2006, 09:55 PM	#12
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: soft bed cover... I am running Extang "Platinum" covers on two different trucks and they are a well built cover and stand up well. The Extang product has a lifetime warranty on most of their parts and a phone call to them will get replacement parts without cost.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.