67-68 Buddy Buckets Seat/Console - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kevs_c10 · 01-08-2006, 02:59 AM

Anyone have pictures and/or the dimensions for the console buddy seat that go with a set of 67-68 bucket seats? I've got the seats without the center console and I'm thinking I'll have to mock up my own. Any help would be much appreciated. Thanks!

rkarr · 01-08-2006, 03:17 AM

Check the FAQ section, i saw a great write-up on these.
Hope it helps

MDC · 01-08-2006, 03:58 AM

Look at '39 steps to Farsides bucket seats'. May help, no dimensions but good pics

**SOON2BLAZE** · 01-08-2006, 10:42 AM

I can post the measurments later this morning. Are you interested in the box dimensions or the the entire seat?

kevs_c10 · 01-08-2006, 07:45 PM

Hey SOON2BLAZE,
I could really use the box but I'll take the whole thing If you don't mind. Thanks!

**PICKMUP** · 01-08-2006, 11:08 PM

Do you have the seats & the frame work? Have you tried to find just a box and the center cushions? I sold one on the parts board last year and may have another.

kevs_c10 · 01-09-2006, 02:29 AM

I've got the seats and frame but the old guy I bought them from didn't have the buddy seat/console. I've been lookin' all over for just the center and, with no luck, figured I'd have to fab my own.

How's Olympia these days? I lived in Washington for years and hope to move back soon. I've got a brother in Silverdale, parents in Coulee Dam, and my wife is from Wenatchee!

**SOON2BLAZE** · 01-09-2006, 01:19 PM

The measurements for the box ( inside measurements) are front to back 16 3/4, width 12 3/4, there is a 1/4 lip at the top of the box. The pad for the lower seat cushion is a 1/2 inch larger in diameter than the box lip all the way around. The upper cushion/ arm rest measures f to b 14" width is 14 1/4. If this is as clear as mud, PM me and I'll fax you a drawing. Good Luck, post it when you get it finished!

kevs_c10 · 01-09-2006, 04:12 PM

Dude, you rock!

Thanks for the measurements!

**uncle** · 01-09-2006, 04:38 PM

Some Dodge buckets had a similar setup.

**PICKMUP** · 01-12-2006, 10:42 PM

I DO have a center box and seat cushions. Notice the unique hinge built in the box to let the seat back move up & down in the correct location. The cushions are intact enough to be good patterns, but you will want to cut new pieces of plywood and maybe foam. PM/email me for details: frankeham@comcast.net.

Huskerboy2 · 02-13-2006, 06:33 PM

Frank, I might be interested in those, if kevs c10 passes. What do you want for them?

**PICKMUP** · 02-13-2006, 09:39 PM

They are SOLD.

01-08-2006, 02:59 AM	#1
kevs_c10 Registered User Join Date: Nov 2005 Location: Spokane Washington Posts: 41	67-68 Buddy Buckets Seat/Console Anyone have pictures and/or the dimensions for the console buddy seat that go with a set of 67-68 bucket seats? I've got the seats without the center console and I'm thinking I'll have to mock up my own. Any help would be much appreciated. Thanks!

01-08-2006, 03:17 AM	#2
rkarr Registered User Join Date: Sep 2005 Location: Roseville, CA Posts: 152	Re: 67-68 Buddy Buckets Seat/Console Check the FAQ section, i saw a great write-up on these. Hope it helps __________________ Avatar is a pic of "Before"... Just wait.. ---------------- 1969 Fleetside: Shortened frame for SWB, ECE 4-6 drop. ECE SS tank. All new ECE suspension. Rebuilt 12 bolt 3:73 with Eaton Posi. Front and rear disc brakes. Ramjet 350 and 700r-4 trans. 20" Centerline wheels with Kumho 295/45/20 tires (I hope they fit). Progress pics: http://s44.photobucket.com/albums/f2...uck/?start=all ---------------- Seriously... It's nothing a large dose of cash can't fix... Right? After all, I can't take it with me when I go... Just gotta have enough to get there!!!

01-08-2006, 03:58 AM	#3
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: 67-68 Buddy Buckets Seat/Console Look at '39 steps to Farsides bucket seats'. May help, no dimensions but good pics __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

01-08-2006, 10:42 AM	#4
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: 67-68 Buddy Buckets Seat/Console I can post the measurments later this morning. Are you interested in the box dimensions or the the entire seat?

01-08-2006, 07:45 PM	#5
kevs_c10 Registered User Join Date: Nov 2005 Location: Spokane Washington Posts: 41	Re: 67-68 Buddy Buckets Seat/Console Hey SOON2BLAZE, I could really use the box but I'll take the whole thing If you don't mind. Thanks! __________________ 1970 C10 Short Fleetside

01-08-2006, 11:08 PM	#6
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,126	Re: 67-68 Buddy Buckets Seat/Console Do you have the seats & the frame work? Have you tried to find just a box and the center cushions? I sold one on the parts board last year and may have another.

01-09-2006, 02:29 AM	#7
kevs_c10 Registered User Join Date: Nov 2005 Location: Spokane Washington Posts: 41	Re: 67-68 Buddy Buckets Seat/Console I've got the seats and frame but the old guy I bought them from didn't have the buddy seat/console. I've been lookin' all over for just the center and, with no luck, figured I'd have to fab my own. How's Olympia these days? I lived in Washington for years and hope to move back soon. I've got a brother in Silverdale, parents in Coulee Dam, and my wife is from Wenatchee! __________________ 1970 C10 Short Fleetside Last edited by kevs_c10; 01-09-2006 at 02:29 AM.

01-09-2006, 01:19 PM	#8
SOON2BLAZE Account Suspended Join Date: Aug 2005 Location: Southern UT Posts: 906	Re: 67-68 Buddy Buckets Seat/Console The measurements for the box ( inside measurements) are front to back 16 3/4, width 12 3/4, there is a 1/4 lip at the top of the box. The pad for the lower seat cushion is a 1/2 inch larger in diameter than the box lip all the way around. The upper cushion/ arm rest measures f to b 14" width is 14 1/4. If this is as clear as mud, PM me and I'll fax you a drawing. Good Luck, post it when you get it finished!

01-09-2006, 04:12 PM	#9
kevs_c10 Registered User Join Date: Nov 2005 Location: Spokane Washington Posts: 41	Re: 67-68 Buddy Buckets Seat/Console Dude, you rock! Thanks for the measurements! __________________ 1970 C10 Short Fleetside

01-09-2006, 04:38 PM	#10
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: 67-68 Buddy Buckets Seat/Console Some Dodge buckets had a similar setup.

01-12-2006, 10:42 PM	#11
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,126	Re: 67-68 Buddy Buckets Seat/Console I DO have a center box and seat cushions. Notice the unique hinge built in the box to let the seat back move up & down in the correct location. The cushions are intact enough to be good patterns, but you will want to cut new pieces of plywood and maybe foam. PM/email me for details: frankeham@comcast.net. Attached Images

02-13-2006, 06:33 PM	#12
Huskerboy2 Senior Member Join Date: Feb 2001 Location: Austin, Texas, USA Posts: 1,628	Re: 67-68 Buddy Buckets Seat/Console Frank, I might be interested in those, if kevs c10 passes. What do you want for them? __________________ '72 Chevy Blazer

02-13-2006, 09:39 PM	#13
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,126	Re: 67-68 Buddy Buckets Seat/Console They are SOLD.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.